• Journal of the Korean Chemical Society
• /
• v.52 no.3
• /
• pp.273-280
• /
• 2008

Mycobacterium tuberculosis (MTB) remains a major worldwide public health problem. In recent years, the incidence of MTB has been rising. Rapid and reliable diagnosis of Mycobacterium tuberculosis is essential to initiate correct treatment, avoid severe complications, and prevent transmission. LAMP was used to develop a rapid and sensitive laboratory diagnostic system for the MTB. In this research, the loop-mediated isothermal amplification method (LAMP) that amplifies DNA with high specificity and rapidity at an isothermal condition was evaluated for rapid detection of MTB. Undiluted DNA (2.10 × 106 copy/mL), 10-1, 10-2, 10-3, 10-4, 10-5 and 10-6 (copy/mL) of MTB DNA were amplified by PCR and LAMP to determine the sensitivity of the assay. At results, the LAMP assay reported here has the advantages of rapid amplification, high sensitivity, and high specificity and will be useful for rapid and reliable clinical diagnosis of MTB in hospital clinical laboratory.

• The Korean Journal of Mycology
• /
• v.47 no.4
• /
• pp.437-441
• /
• 2019

Verticillium wilt disease is caused by a fungal plant pathogen Verticillium dahliae, which attacks commercial crops such as chrysanthemum. The conventional methods so far used to identify this fungal pathogen require high expertise and are time-consuming. Therefore, in this study, we developed an assay for the rapid and specific detection of V. dahliae infection using loop-mediated isothermal amplification (LAMP) method. For this assay, four primers for LAMP were designed for targeting cellulose-growth-specific protein partial mRNA gene in Verticillium dahliae. Under standard condition, the optimum reaction temperature for amplification is around 60 ℃ within 60 minutes. This LAMP assay was designed to amplify only present in V. dahliae. When this LAMP assay applied to the DNAs for four other soil-borne fungi and host plants, no amplification was detected. Therefore, this LAMP assay we developed for V. dahliae is expected to do detection at the early stage of its infection. The fast and reliable detection method will allow us to develop effective management system to monitor and control infection of this pathogen in chrysanthemum plant.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.11
• /
• pp.1437-1446
• /
• 2000

A numerical analysis on the freeze coating process of a non-isothermal finite dimensional plate with a binary alloy is performed to investigate the growth and decay behavior of the solid and the mushy layer of the freeze coat and a complete procedure to calculate the process is obtained in this study. The continuously varying solid and mushy layers are immobilized by a coordinate transform and the resulting governing differential equations are solved by a finite difference technique. To account for the latent heat release and property change during solidification, proper phase change models are adopted. And the convection in the liquid melt is modeled as an appropriate heat transfer boundary condition at the liquid/mushy interface. The present results are compared with analytic solutions derived for the freeze coating of infinite dimensional plates and the discrepancy is found to be less than 0.5 percent in relative magnitude for all simulation cases. In addition the conservation of thermal energy is checked. The results show that the freeze coat grows proportional to the 1.2 square of axial position as predicted by analytic solutions ar first. But after the short period of initial growth, the growth rate of the freeze coat gradually decreases and finally the freeze coat starts to decay. The effects of various non-dimensional processing parameters on the behavior of freeze coat are also investigated.

• Polymer(Korea)
• /
• v.27 no.3
• /
• pp.176-182
• /
• 2003

The fluorine-containing epoxy resin, 2-trifluorotoluene diglycidylether (FER) was prepared by reaction of 2-chloro-${\alpha}$,${\alpha}$,${\alpha}$-trifluorotoluene with glycerol diglycidylether in the presence of pyridine catalyst. Curing behavior of FER/DDM system was investigated using dynamic and isothermal DSC. Cure activation energy (Ea) was determined by Flynn-Wall-Ozawa's equation. The rheological properties of FER/DDM system were studied under isothermal condition using a rheometer. Cross-linking activation energy (Ec) was determined from the Arrhenius equation based on gel time and curing temperature. As a result, the chemical structure of FER was confirmed by FT-IR, $\^$13/C NMR, and $\^$19/F NMR spectroscopy. The cure activation energy of FER/DDM system was 55.4 kJ/mol and conversion and conversion rate were increased with the curing temperature. The cross-linking activation energy of FER/DDM system was 41.6 kJ/mol and gel time was decreased with the curing temperature.

• Journal of Environmental Health Sciences
• /
• v.34 no.3
• /
• pp.240-246
• /
• 2008

The purpose of this study was to gain basic information on the characteristics of $CO_2$ adsorption in relation to $Na_2CO_3$, $K_2CO_3$, $Li_2CO_3$-impregnated activated carbon in a Fixed Bed Reactor. From the results of this study the following conclusions were made: $Na_2CO_3$, $K_2CO_3$, $Li_2CO_3$-impregnated activated carbon had a longer breakthrough time and more enhanced adsorption capacity than activated carbon alone. When tested with isothermal adsorption and tested for $CO_2$ adsorption the amount of $CO_2$ adsorbed varied with temperature, $CO_2$ inlet concentration, gas flow rate, aspect ratio, etc. Based on the results, when Langmuir, Freundlich and Dubinin-Polanyi adsorption isotherms were used for linear regression of isothermal adsorption data, Langmuir adsorption isotherm was the most suitable. And, the optimum condition for $Na_2CO_3$ and $K_2CO_3$ impregnated activated carbon make-up was 1N and $Li_2CO_3$ was 0.1N. It could be concluded that adsorption capacity was decreased with adsorption temperature and increased gas concentration. When the aspect ratio (L/D) was varied 0.5, 1.0 and 2.0, the significant drop of adsorption amount was observed below 1.0 and breakthrough time was shortened with gas flow rate.

• Biomedical Science Letters
• /
• v.25 no.1
• /
• pp.75-82
• /
• 2019

We developed the multiplex LAMP assay using 16S rRNA, femA and mecA genes for direct detection of the methicillin resistance in Staphylococci from positive blood culture. To simultaneously recognize Staphylococci genus, S. aureus and methicillin resistance, three sets of six primers for 16S rRNA, femA and mecA were designed, respectively. The performance of LAMP assay was affirmed using VITEK system for the phenotypic methods of identification and for oxacillin and cefoxitin antimicrobial susceptibility. The optimal condition for LAMP assay was obtained under $64^{\circ}C$ for 50 min. The detection limit was determined to be of 20 copies and CFU/reaction ($10^4CFU/mL$). For clinical application of comparison with phenotypic methods, the sensitivity and specificity of the LAMP with femA gene for detecting S. aureus was 95.31% and 100%, respectively. The sensitivity and specificity of the LAMP with mecA gene for detecting methicillin resistance was 98.46% and 100%, respectively. The multiplex LAMP assay with femA and mecA gene successfully detected all of MRSA (38 isolates) isolates from 103 Staphylococci in blood cultures. The LAMP assay developed in this study is sensitive, specific, and of excellent agreement with the phenotypic methods.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.2
• /
• pp.11-15
• /
• 2011

Heat transfer equation is first reviewed and then governing equation of moisture diffusion. Analogy scheme is applied to analysis the moisture absorption problem of polymers. It make possible to numerically analyze the diffusion problem for single medium by using commercial finite element code if it is under the isothermal loading condition. It is extended to special multimaterial system by introducing pressure ratio function, whose moisture characteristics of materials are proportional to temperature only. The weight changes of silicon-nonconductive-polymer joint model due to moisture absorption is measured and been very close to the numerical results as for single media with boundary condition with zero concentration, but yields numerical errors as for multisystem media.

• Journal of computational fluids engineering
• /
• v.21 no.3
• /
• pp.110-117
• /
• 2016

It is a essential to minimize production of by-products for economically effective petrochemical process. In order to find key factor to achieve the effective process, 2-dimensional computational fluid dynamics considering a variety of physics such as convective and radiative heat transfer and thermal cracking of ethane are carried out. The reactor is modeled as an isothermal tube, whose length is 1.2 m and radius is 0.01 m, respectively. At first, the axial distribution of representative by-products in ethane thermal cracking are investigated in each inner wall temperature conditions. Then the comparison between concentration of propene($C_3H_6$) and ethane conversion is discussed with respect to inner wall temperature conditions too. Finally, both reaction rate and turbulent kinetic energy are used to identify the production mechanism of $C_3H_6$ under the intersection point in the plot for $C_3H_6$ molar concentration and ethane conversion.

• Research in Plant Disease
• /
• v.22 no.3
• /
• pp.178-183
• /
• 2016

Soybean yellow mottle mosaic virus (SYMMV) is a new emerging plant virus detected in soybean (Glycine max) in Korea. Reverse transcription loop-mediated isothermal amplification (RT-LAMP) assay for rapid detection of SYMMV has been developed. In this study, we have designed primers (SYMM-F3/B3/FIP/BIP) specific to sequences from the coat protein gene of SYMMV genome. Sensitivity analysis showed that RT-LAMP was 10 to 100 times more sensitive than reverse transcription polymerase chain reaction (RT-PCR). The optimal reaction condition of RT-LAMP was determined at $65^{\circ}C$ for 50 minutes. The result indicates that RT-LAMP assay does not require special equipment and long time for SYMMV detection. Therefore, it can be an alternative detection method of RT-PCR in laboratory.

• Korean Chemical Engineering Research
• /
• v.57 no.3
• /
• pp.420-424
• /
• 2019

In SNG (synthetic natural gas) process by proposed RIST(Research Institute of Industrial Science & Technology)-IAE(Institute for Advanced Engineering) (including three adiabatic reactors and one isothermal reactor), the methanation reaction and water gas shift (WGS) reaction take place simultaneously, and the supply of steam with syngas might control the temperature in catalyst bed and deactivate the catalyst. In this study for development of SNG process, the characteristics of the methanation reaction with a Ni-based catalyst by prepared RIST and using a low $H_2/CO$ mole ratio (including $CO_2$ 22%) are evaluated. The operating conditions ($H_2O/CO$ ratio of the $1^{st}$ adiabatic reactor, operating temperature range of $4^{th}$ isothermal reactor, etc.) were reflected the results from previous studies and in the same condition a pilot scale SNG process is carried out. As a results, the pilot scale SNG process is stable and the CO conversion and $CH_4$ selectivity are 100% and 96.9%, respectively, while the maximum $CH_4$ productivity is $660ml/g_{cat}{\cdot}h$.