• 한국정보처리학회논문지
• /
• 제4권11호
• /
• pp.2832-2839
• /
• 1997

본 연구에서는 Asynchronous Transfer Mode (ATM) 계층의 기능중 유휴 가상 채널에 프로토콜 프로토콜 적합성 시험 제어 기능을 갖게 하여 Test Coordination Procedures (TCP) 채널로 활용하는 방안을 제시하였다. 프로토콜 적합성 시험을 위하여 국제 기구에서 권고하고 있는 방법중 원격 시험 방법을 선택하면 System Under Test (SUT)측에 서 능동적으로 Test Event를 발생시켜야 하는 경우에 개발자가 직접 수동적으로 운용을 하거나, Implementation Under Test (IUT)에 대한 제어 및 관찰이 불가능한 경우도 발생하게 된다. ATM망에서 프로토콜 적합성 시험시 시험 영역(Test Coverage)을 최대화하고, 오류검출 영역(Fauit Coverase)을 극대화하기 위해서는 원격시험방법보다는 분산시험방법이 적절하며, 분산시험방법을 채택할 경우 TCP를 구현하기 위하여 시험정보를 전달하기 위한 채널을 확보하는 것이 요구된다. 본 고에서 제안하고 있는 방법은 오류 검출 영역을 극대화 시키고 오퍼레이터의 개입없이 시험의 자동화 구현이 용이하고, ATM장치의 정상동작에는 영향을 주지 않음은 물론 시험제어를 위한 별도의 채널을 확보하지 않고서도 분산시험방법을 적용할 수 있다는 점 을 특징으로 들 수 있다．

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1215-1220
• /
• 2003

People's Republic of China is one of the most rapidly developing countries in the world today. There is a great demand on highly actual and accurate spatial information of the whole country, especially of West China which becomes the focus of development of the Chinese government right now and in the next years, but where still not enough topographic maps are available. This raises great challenges to the surveying and mapping community in China. Facing the new challenges the Chinese Academy of Surveying and Mapping (CASM) started its pioneer work early 2002 to explore new techniques and technologies available today toward increasing the map productivity. With import of a CCNS/AEROcontrol system in November 2002 the first DGPS/IMU-based photogrammetric project in China was successfully accomplished jointly by CASM and the Germany-based companies IGI and Techedge. Two photogrammetric blocks of 1:4,000 and 1:20,000 photo scale, respectively, were flown in Anyang, China. Direct georeferencing and integrated sensor orientation were conducted. Results achieved were proven by using ground check points and compared with those of aerial triangulation. Orthophotos generated based on direct georeferencing shows the high efficiency and quality, and thus proved the promise of the new technology. Furthermore several DGPS/IMU-based photogammetric projects was accomplished one by one and a big project of more than 100,000 km2 in the Inner Mongolia will be started in August 2003. The paper presents experiences with DGPS/IMU-based photogrammetry in China. Results achieved in concrete projects are shown and evaluated. Politic and technical specialties in China are discussed. Conclusions outline the potential of DGPS/IMU-based photogrammetric production in China.

• 폴리머
• /
• 제26권5호
• /
• pp.653-660
• /
• 2002

가교제 poly(ethylene glycol) diacrylate (PEGDA)를 사용하여 제조한 poly(N-iso-propylacrylamide) (PNIPAAm) 및 poly (N-isopropylacrylamide-co-sodium methacrylate) (P(NIPAAm-co-SMA)) hydrogels의 부피 상전이 현상을 함수율과 표면적의 변화로 고찰하였다. Hydyogel의 부피 상전이 온도는 가교제의 농도에는 영향을 받지 않았으나 공단량체인 SMA의 소량 첨가로 4$0^{\circ}C$ 이상 상승하였다. 특히 PEGDA를 가교제로 사용하였을 경우 가교 길이가 길어짐에 따라 부피 상전이 온도가 더 높게 상승하였다. PNIPAAm 및 P(NIPAAm-co-SMA) hydrogels의 표면적 역시 부피 상전이 온도를 전후하여 감소하였는데 이는 부피 상전이 과정에서 기공의 크기가 현저하게 감소하였기 때문이다. 따라서 표면적과 기공 크기의 변화가 부피 상전이를 나타내는 주요한 인자임을 알 수 있다.

• Safety and Health at Work
• /
• 제8권4호
• /
• pp.364-370
• /
• 2017

Background: Labeled noise reduction (NR) data presented by manufacturers are considered one of the main challenging issues for occupational experts in employing hearing protection devices (HPDs). This study aimed to determine the actual NR data of typical HPDs using the objective fit testing method with a microphone in real ear (MIRE) method. Methods: Five available commercially earmuff protectors were investigated in 30 workers exposed to reference noise source according to the standard method, ISO 11904-1. Personal attenuation rating (PAR) of the earmuffs was measured based on the MIRE method using a noise dosimeter (SVANTEK, model SV102). Results: The results showed that means of PAR of the earmuffs are from 49% to 86% of the nominal NR rating. The PAR values of earmuffs when a typical eyewear was worn differed statistically (p < 0.05). It is revealed that a typical safety eyewear can reduce the mean of the PAR value by approximately 2.5 dB. The results also showed that measurements based on the MIRE method resulted in low variability. The variability in NR values between individuals, within individuals, and within earmuffs was not the statistically significant (p > 0.05). Conclusion: This study could provide local individual fit data. Ergonomic aspects of the earmuffs and different levels of users experience and awareness can be considered the main factors affecting individual fitting compared with the laboratory condition for acquiring the labeled NR data. Based on the obtained fit testing results, the field application of MIRE can be employed for complementary studies in real workstations while workers perform their regular work duties.

• 한국가금학회지
• /
• 제21권4호
• /
• pp.257-266
• /
• 1994

Three protein feeding systems for egg-type pullets involving conventional step-down protein 18-15-12%), step-up protein(12-15-18%) and single-stage low protein (13-13-13%) with an iso-energy level of 2,900 ME kcal /kg were compared to examine the effect on pullet growth and subsequent laying performance. During the growing period, pullets subjected to the step-up and single-stage low protein feeding systems were lighter in body weight and consumed less feed and netabolizable energy than those on the conventional step-down protein feeding system(P<0.05). 3ut the pullets on the step-up protein diet consumed more protein, and those on the single-stage low protein diet consumed less protein than those on the step-down protein diet(P<0.05). Also, he feed cost was less in pullets on the single-stage low protein diet than in those on the other systems(P<0.05). During the laying period, sexual maturity was later in hens reared on the step-up and single-stage low protein diets than in those on the step-down protein diet(P<0.05), however, average hen-day egg production and egg weight were not significantly affected by the protein feeding systems in the growing period. Daily feed intake and feed required per egg were significantly reduced in hens on the single-stage low protein diet compared to those on conventional protein feeding system(P<0.05). It was concluded that the 13% single-stage low protein feeding system produced smaller pullets with less feed, energy, protein, and feed cost during the growing period, and hens reared on that system consumed less feed during the laying period without any impairment of production compared to the conventional rearing system.

• 한국소음진동공학회논문집
• /
• 제21권7호
• /
• pp.615-621
• /
• 2011

There are hundreds of thousands call center workers wearing acoustic device. However, researches and noise exposure measurements on the noise transmitted from acoustic devices have seldom been performed due to the difficulty of measurement and to the absence of the measuring method in Korea. The aim of this study is to set up management measures to protect hearing loss on the call operator by acquiring measurement data of noise transmitted from the headset. Noise exposure measurements of 17 operators were performed in 7 call centers and head and Torso simulator method in compliance with the ISO standard 11904-2 was used for the measurement of noise transmitted from the headset. Sound pressure levels(SPL) transmitted from the headset were 73.2~86 dB(A). The operator exposed to the highest SPL set up his volume control at 9 which was the highest volume level. The volume control level, adjustable from 1 to 9, could be identified 12 out of 17 operators and the range of volume levels was 4.5~9. As a result of pearson correlation analysis, the correlation between volume level and SPL transmitted from the headset showed high relation as significance at the 0.672 level(p<0.05). To protect hearing loss of call center operators, it is more practical and effective measure to limit the volume level below the noise exposure level, i.e. 85 dB(A), rather than to carry out noise monitoring considering cost-effective aspect.

• 한국화재소방학회논문지
• /
• 제20권4호
• /
• pp.58-64
• /
• 2006

부분배연설비를 가지고 있는 침매터널에서 화재시 배연효율을 분석하기위해 풀화재를 이용하여 축소모형실험을 수행하였다. 화재가 발생하였을 때 주위 유동이 없는 경우인 자연배연과 임계속도로 제트팬을 가동하는 강제배연의 경우에 터널내의 온도와 연소가스 농도를 측정하였다. 자연배연에 비해 강제배연은 화재발생 초기에 화원과 터널 내 기류와의 급격한 혼합에 의해 성층화 정도가 미미해지고 보다 낮은 온도를 화원주위에서 얻을 수 있었다. 이러한 급격한 혼합은 터널 상부에 위치한 부분제연 갤러리의 효율을 변화시키는데, 자연배연인 경우에 약 30%의 배연효율이 증가되었다. 일산화탄소 농도계측으로 얻어진 배연효율은 등온기체모델을 사용한 선행연구와 비교하여 거의 일치하는 결과를 얻을 수 있었다. 이러한 결과는 침매터널 화재시 승객의 안전한 대피를 위한 부분배연설비의 최적 운전방안으로 제시된다.

• Current Research on Agriculture and Life Sciences
• /
• 제5권
• /
• pp.143-157
• /
• 1987

In order to determine the design precipitation, the most probable daily precipitation and annual precipitation at every spot are calculated and iso - precipitation line are drawn. Probability of precipitation and drought phenomena of each gage station are analyzied by the method of frequency analysis from the statistical conceptions. The results summarized in this study are as the follows. 1. Annual mean precipitation in kyungpook area are 1044 mm, about 115 mm less than annual mean precipitation of Korea amounts to l1S9mm, and found to regionally unequal. 2. Monthly mean rainfall of July is 242.2mm, 23.2%, August 174.2mm, 16.7%, June 115mm, 11% and September 114.2mm, 10.9% and Rainfall depth of July-August are more than 40% of annual precipition. This shows notable summer rainy weather by typoon and low pressure storm and seasonal unbalance of water supply. 3. The relation among the maximum precipi.tation per day, per two continuous days and per three contnous days are caculated and the latter is found 31.0% increased rate of the first and the last 48.2% increased rate of first. 4. Probability precipitation in Kyungpook area are shown as 9.0%(5 year), 13.3%(10 year), 17.7%(20 year), 23.1%(50 year), 27.0%(100 year) and 31.1%(200 year) increased rate of each recurrence year compared with observed average annual precipitation. 5. From annual precipitation and maximum daily rainfall data probability of precipitation and precipitation isohyetal line are derived which shown as Table 11 and Fig. 8. 6. Drought days are divided 6 class and analysed results are shown on table 12. Average occurrence time of 10-14 continuous drought days are 2.3 time per year, 15-19 days are 0.9 time per year, 20-24 days are one per six years, 30-34 days are once per nine years and over than 35days are once per 25 years.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권3호
• /
• pp.118-122
• /
• 2010

본 연구는 도시철도 터널내 화재시 구조체의 내화성능을 평가하기 위한 기준을 제시하고자 실시하였다. 현재 국내 도심의 지하철 터널 구간은 135km로써 그 규모가 세계 4위이며 대도시들의 도시철도 터널건설의 증가와 그 연장이 길어짐에 따라 터널 내 화재사고가 갈수록 높아지고 있는 상황이다. 하지만 국내에는 도시철도 터널 화재에 대한 내화성능평가에 기본적으로 적용되는 시간-온도 곡선이 없다. 따라서 본 연구에서는 국내 도시철도 터널의 통행량, 차량 종류 등을 고려한 열방출율을 기초로 외국에서 제시된 시간-온도 곡선을 검토하였으며 국내 실정에 맞는 설계화재 모델을 제시하였다. 또한 제시된 설계화재모델에 대해 수치해석을 통하여 화재시 도시철도 터널 구조체의 온도분포를 산정하였다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 추계학술논문요약집
• /
• pp.104-104
• /
• 2018

Kori Unit 1 is the first permanent shutdown nuclear power plant in Korea and it is on June 18th, 2017. Spent fuel assemblies began to be discharged from the reactor core to the spent fuel pool(SFP) within one week after shutdown of Kori unit 1 and the campaign was completed on June 27th, 2017. The total number of spent nuclear fuel assemblies in SFP of Kori Unit-1 is 485 and their discharging date is different respectively. So, decay heat was evaluated considering the actual enrichment, operation history and cooling time of the spent fuel assemblies stored in SFP of the Kori Unit-1. The code used in the evaluation is the ORIGEN-based CAREPOOL system developed by KHNP. Decay heat calculation of PWR fuel is based on ANSI/ANS 5.1-2005, "Decay heat power in light water reactors" and ISO-10645, "Nuclear energy - Light water reactors - Calculation of the decay heat power in nuclear fuels. Also, we considered the contribution of fission products, actinide nuclides, neutron capture and radioactive material in decay heat calculation. CAREPOOL system calculates the individual and total decay heat of all of the spent fuel assemblies in SFP of Kori Unit-1. As a result, the total decay heat generated in SFP on June 28th, 2017 when the spent fuel assemblies were discharged from the reactor core, is estimated to be about 4,185.8 kw and to be about 609.5 kw on September 1st, 2018. It was also estimated that 119.6 kw is generated in 2050 when it is 32 years after the permanent shutdown. Figure 1 shows the trend of total decay heat in SFP of Kori Unit-1.