• Journal of Soil and Groundwater Environment
• /
• v.17 no.4
• /
• pp.63-72
• /
• 2012

The main objective of this study is to assess the compatibility between Korean ministry of environment (KME) standard and ISO (KS I ISO) standard for the determination of BTEX and TPH content in soil. We carried out comparison analysis for both methods using CRM and matrix spiked samples. In case of GC-MS analysis for BTEX, we got statistically (significance level: 0.05) the same results from KME standard (ES 07600.1) and ISO standard (KS I ISO 15009). However, it showed statistically (significance level: 0.05) different results when TPH was analyzed by KME standard (ES 07552.1) and ISO standard (KS I ISO 16703). To clarify the reason why both methods produced different results for TPH content, we also did some additional experiments in terms of differences in extraction, clean-up and target hydrocarbon range. Extraction with polar and non-polar compounds mixed solvent (acetone+n-heptane) of KS I ISO 16703 showed higher extraction efficiency than with only non polar solvent (dichloromethane) extraction of ES 07552.1 by about 9%. While column type clean-up of KS I ISO 16703 showed the reduction in TPH content between before and after clean-up, batch type of clean-up of ES 07552.1 did not show any changes in TPH content through clean-up process. The target hydrocarbon range of ES 07552.1 and KS I ISO 16703 is $C_8{\sim}C_{40}$ and $C_{10}{\sim}C_{40}$, respectively. From this point of view, kerosene and JP-8 contaminated soil showed higher RPD (relative producibility deviation) values between results by both method than that of lubricant or diesel contaminated soil. The higher content of hydrocarbon ($C_8{\sim}C_{10}$) in kerosene and JP-8 played an important role in increasing RPD values in addition to the effects caused by different solvents and clean-up method. Consequently, it was concluded that both methods (ES 07552.1 and KS I ISO 16703) were not compatible.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.6
• /
• pp.10-15
• /
• 2008

In this paper, a new NMOS gate cross-connected current-mirror type bridge rectifier for UHF RFID applications is presented. The DC converting characteristics of the proposed rectifier are analyzed with the high frequency equivalent circuit and the gate capacitance reduction technique for reducing the gate leakage current due to the increasing of operating frequency is also proposed theoretically by circuitry method. As the results, the proposed rectifier shows nearly same DC output voltages as the existing NMOS gate cross-connected rectifier, but it shows the gate leakage current reduced to less than 1/4 and the power consumption reduced more than 30% at the load resistor, and it shows more stable DC supply voltages for the valiance of load resistance. In addition, the proposed rectifier shows high enough and well-rectified DC voltages for the frequency range of 13.56MHz HF(for ISO 18000-3), 915MHz UHF(for ISO 18000-6), and 2.45 GHz microwave(for ISO 18000-4). Therefore, the proposed rectifier can be used as a general purpose one to drive RFID transponder chips on various RFID systems which use specified frequencies.

• Analytical Science and Technology
• /
• v.31 no.1
• /
• pp.14-22
• /
• 2018

After signing the WHO FCTC in 2003, South Korea ratified the FCTC in 2005. This study was conducted to provide data on toxic constituents that can be used as useful information for the level of exposure to Korean smokers. Emissions data from five brands of cigarettes were tested under the ISO and "Canadian Intense (HCI)" smoking regimes, respectively. We conducted an analysis of 25 compounds containing nicotine, tar, carbonyls, phenolics, volatile organic compounds (VOCs), and semi-VOC cigarette smoke. Tar and nicotine showed levels of 4.3 to 5.8 mg/cig and 0.4 to 0.5 mg/cig, respectively, which are within the range of tolerance presented in ISO 8243. In the case of carbonyls, formaldehyde was detected within a range of 8.2 to $14.3{\mu}g/cig$, and acetaldehyde was present within a range of 224.7 to $327.2{\mu}g/cig$ under the ISO smoke regime. Crotonaldehyde was not detected under the ISO regime, and all of the carbonyls showed values 2.3 to 4.5 times higher under the HCI regime than those under the ISO regime. Catechol, which showed a level of 47.0 to $80.5{\mu}g/cig$ under the ISO regime and 117.5 to $184.7{\mu}g/cig$ under the HCI regime, was the highest constituent among the phenols. The amount of isoprene was 91.7 to $158.3{\mu}g/cig$ under the ISO regime and 221.0 to 377.0 under the HCI regime. To summarize, most of the constituents showed a tendency to be detected at levels 2 to 4 times higher under the HCI regime than under the ISO regime. Above all, these results represent the first analysis in Korea from an independent institute of tobacco companies under accreditation of ISO 17025.

• The Korean Journal of Archival Studies
• /
• no.65
• /
• pp.397-457
• /
• 2020

The purpose of this study is to assist in the overall understanding through detailed analysis of the ISO 30301:2019 standard, and to discuss the implications of the standard. To this end, this study first looked at the background of the revision of the ISO 30301 standard, and specifically outlined the process of establishing and revising the management systems for records family of standards by time. This study also looked at the HLS(High Level Structure) of the management system standard applied in the revised edition and the main revisions to the ISO 15489:2016 standard, as well as the emerging concept of 'Records requirements'. This study then compared revisions to the ISO 30301:2019 standard with the HLS of the management system standard and the ISO 30301:2011 standard. In addition, the main features of the revised edition of this standard were identified by analyzing new, enhanced, and changed requirements in the revised edition of ISO 30301. Based on this analysis, the amendments to this standard divided into four categories: expanding the records processes and realizing systematic record management, strengthening leadership and efficient management of the management systems for records, integrating and utilizing full-fledged other management system standards, and realizing flexible records management governance at the business process level.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.69-69
• /
• 2017

농기계의 대형화, 고성능화로 장치가 복잡해지면서 안전표지 및 조작표시의 역할이 증대되고 있으나 기존에 제정된 KS B 7947의 경우 ISO표준 도안 및 작도방법을 준용하지 않고 있어 기호가 조잡하고 복잡하며 명확히 이해하기 어려워 산업체의 활용도가 낮은 상황이며, 제조사별로 상이한 도안을 사용하고 있는 실정이다. 따라서 ISO표준 도안 및 작도방법을 준용하여 그래픽 심볼 도안을 개정하여 산업체의 활용도가 높아져 조작표시를 농업인이 쉽게 인식하고 이해하여 위험 등을 피할 수 있도록 하여 사고 예방에 기여할 수 있도록 하는 것이 중요할 것이다. 본 연구에서는 안전표지 및 조작표시를 ISO 표준 도안 및 작도방법을 준용하여 작성하기 위한 방법을 연구하고 KS B-7946에 제시된 65개 항목 중 일본과 미국에서 동시에 사용되고 있는 항목 4개는 유지하고 10개 항목은 삭제하며, 승용 동력운반차, 매연저감 장치 등 11개 항목을 추가하고 40개 항목의 수정을 통하여 국내 농기계 관련 안전표지 및 조작표시의 그래픽 심볼을 개선하고 그 결과를 ISO에 국제표준 규격도안 추가 및 개정을 제안하고자 수행되었다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.68-68
• /
• 2017

농작업 시에 가장 빈번하게 일어나는 위험한 농기계 관련 사고는 전도사고로 트랙터의 전복이 꼽히고 있다. 따라서 트랙터의 전복을 유발하는 주원인인 무게중심의 측정이 중요시 되고 있다. 지금까지 사용해 왔던 북미와 유럽, 일본 등의 선진 농기계 업체들이 사용하고 있는 트랙터 무게중심 측정방법(ISO 789-6 : OECD code2, 작도법)은 정밀성과 신뢰성이 다소 결여되어 이를 정확히 측정하기 위한 새로운 방법 및 알고리즘의 개발이 시급한 상황이다. 따라서 본 연구에서는 트랙터 무게 중심을 보다 정확히 측정할 수 있는 방법을 개발하고 이를 ISO에 NP(New Proposal)제안 과정을 거쳐 ISO 개정을 위한 기초연구로 수행되었다. 트랙터 무게중심 측정을 위한 ISO 789-6의 경우 작도법으로 시험하도록 되어 있으나, 본 연구에서는 무게중심을 계산할 수 있는 프로그램을 개발하고, 극좌표계산방식으로 측정된 값을 프로그램에 직접 입력하는 방법을 개발하여 신뢰성과 정밀성을 높일 수 있도록 하였다. 프로그램의 개발은 ISO(OECD) 방법에 대해 계산식을 개발하고 4개의 좌표가 교차하는 좌표와, 트랙터 후방을 들어 올렸을 때의 끝점 좌표, 전방을 들어 올렸을 때의 끝점 좌표 등을 구하는 자동 알고리즘을 개발하고, 중심 위치는 시험방법 및 트랙터의 제원에 따른 치수와 중량 데이터를 측정하여 입력하면 자동으로 계산이 되도록 하였다. 본 연구에서 개발한 방법과 기존 ISO 789-6(작도법)을 비교한 결과 보다 신뢰성 있는 결과를 얻을 수 있었으며, 이를 ISO에 NP제안을 위한 합리적인 시험방법임을 알 수 있었다. 개정작업이 완료될 시에 이 방법을 농기계 업체에 보급함으로써 보다 안전한 농기계 설계 및 제작에 기여하고 농민의 안전사고 예방에 기여할 수 있을 것이다.

• Food Science of Animal Resources
• /
• v.38 no.2
• /
• pp.259-272
• /
• 2018

This study aims to investigate the protective effects of kefir against myocardial infarction induced by isoproterenol (ISO). The rats were randomly divided into 4 groups, each group consisting of 8 rats. The control group, the kefir group (5 mL/kg/d kefir administered to rats as intra-gastric gavage for 60 d), the ISO group (100 mg/kg ISO was administered to rats, s.c. on 61. and 62. d), and kefir+ISO group (5 mL/kg/d kefir was administered to rats intra gastric gavage for 60 days prior to ISO, 100 mg/kg in two doses on day 61 and 62). 12 h after the last ISO dose, all rats were decapitated and their blood samples were collected. Cardiac tissue was reserved for histopathological examination. creatine kinase (CK), alanine aminotransferase (ALT), aspartate aminotransferase (AST), lactate dehydrogenase (LDH), triglycerides, total cholesterol,very low density lipoprotein (VLDL), low density lipoprotein (LDL), high density lipoprotein (HDL) and glucose were measured by autoanalyzer, whole blood malondialdehyde (MDA), glutathione (GSH) and plasma advanced oxidation protein products (AOPP) levels were measured spectrophotometrically. It was determined that in the group of kefir+ISO, the levels of AST (p<0.001), CK (p<0.001), LDH (p<0.001), MDA (p<0.001) and AOPP (p<0.001) were decreased, while the GSH (p<0.05) increased, compared to ISO group. There were no significant changes in lipid profile and glucose levels between these two groups. In conclusion, by examining cardiac enzymes and histopathological changes in cardiac tissue, it can be concluded that the administration of kefir in myocardial infarction induced by ISO can protect the heart with its antioxidant characteristic and minimize the toxic damage created by ISO.

• Korean Journal of Construction Engineering and Management
• /
• v.2 no.4 s.8
• /
• pp.107-116
• /
• 2001

As the international trade has been increased, unified worldwide standards are getting more important and necessary. At the TBT(Agreement on Technical Barrier to Trade) of WTO(World Trade Organization) and the CTI meeting of APEC(Asia-Pacific Economic Cooperation), they made an agreement with applying International Standards to National Standards gradually. In addition, ISO (International Organization for Standardization) established the ISO/IEC Guide 21, a guideline for applying International Standards to National Standards. In these environment, Korean Industrial Standards has to be prepared for it. This paper introduce the comparison between Korean Industrial Standards and ISO Standards about the standards of sampling and testing the fresh concrete, based on ISO/IEC Guide 21 by ISO and the Applying guideline by Korean Agency for Technology and Standards, and then discuss the problem about applying them. The overall objective is to establish the applying guideline on construction fields, which is civil and building engineering part(KS F) of Korean Industrial Standards.

• Human Ecology Research
• /
• v.57 no.1
• /
• pp.91-107
• /
• 2019

The use of standardized stitches in globalized apparel markets is becoming increasingly important. However, many apparel vendors still use disunified stitches, such as Japanese and English. This study analyzes the usage of clothing stitches of cut and sewn knit garment fabrication of small companies. The results of the analysis of 464 worksheets of cut and sewn knit garments are as follows. First, of the 464 worksheets, only 4.31% are labeled as ISO 4915 No. Among the 1,399 stitches, only 3.15% were marked with the ISO 4915 No. Second, among 1,399 stitches, ISO 4915 No. 406 followed by 401 was the most frequently used. Third, in the case of the top, ISO 4915 No. 406 was used the most; in addition, ISO 4915 No. 401, 301 and 304 were also frequently used. Fourth, in the case of the bottoms, the stitch with the highest frequency was ISO 4915 No. 406 followed by ISO 4915 No. 103 and 401, respectively. Fifth, in the case of the top, ISO 4915 No. 406 was most commonly used in hemlines and sleeve edges; in addition, in the case of the bottoms, ISO 4915 No. 406 and 103 were most commonly used as hemlines. In conclusion, it is important to use international standard stitches, especially for the most frequently used stitches. By using the standard stitches, the communication errors between production departments can be reduced and information can be accurately delivered.

• Annual Conference on Human and Language Technology
• /
• 2015.10a
• /
• pp.3-8
• /
• 2015

최근에 ISO/TC 37/SC 4 산하의 Working Group 2 Semantic annotation에서 자연언어의 의미주석에 관한 4 개의 국제표준을 완성하여 출판하였다. 그 중에서 2 개의 국제표준 ISO 24617-1 SemAF-Time(ISO-TimeML)[1]과 24617-7 ISOspace[2]를 간략히 소개하는 것이 이 발표의 목적이다. 자연언어 텍스트에서 전자는 사건과 관련된 시간 정보를 주석처리하고, 후자는 사건(event), 특히 운동(motion)과 관련된 공간 정보를 주석 처리하는 주석체계(annotation scheme)들을 구축, 기술하는 명세언어(specification language)이다. 이 표준들은 또한 ISO 24612:2012 LAF (Linguistic annotation framework)[3]의 제약조건들을 준수하며 언어 주석체계를 구축하였다. 오늘의 발표는 이들 두 개의 국제표준에 준한 주석체계들 ASisoTime과 ASisoSpace가 LAF를 따라 어떻게 구축되었는지 그 추상통사구조(abstract syntax)를 명시하고, 의미주석체계로서의 이들 주석체계의 타당성을 보이기 위하여 주석기반의 의미형식(semantic form)들을 체계적으로 도출하는 과정을 또한 보이도록 한다.