• Coupled systems mechanics
• /
• 제6권3호
• /
• pp.229-249
• /
• 2017

A new technique to mitigate irregular buildings with soil structure interaction (SSI) effect subjected to critical seismic waves is presented. The L-shape in plan irregular building for various reasons was selected, subjected to seismic a load which is a big problem for structural design especially without separation gap. The L-shape in plan building with different dimensions was chosen to study, with different rectangularity ratios and various soil kinds, to show the effect of the irregular building on the seismic response. A 3D building subjected to critical earthquake was analyzed by structural analysis program (SAP2000) fixed and with SSI (three types of soils were analyzed, soft, medium and hard soils) to find their effect on top displacement, base shear, and base torsion. The straining actions were appointed and the treatment of the effect of irregular shape under critical earthquake was made by using tuned mass damper (TMD) with different configurations with SSI and without. The study improve the success of using TMDs to mitigate the effect of critical earthquake on irregular building for both cases of study as fixed base and raft foundation (SSI) with different TMDs parameters and configurations. Torsion occurs when the L-shape in plan building subjected to earthquake which may be caused harmful damage. TMDs parameters which give the most effective efficiency in the earthquake duration must be defined, that will mitigate these effects. The parameters of TMDs were studied with structure for different rectangularity ratios and soil types, with different TMD configurations. Nonlinear time history analysis is carried out by SAP2000 with El Centro earthquake wave. The numerical results of the parametric study help in understanding the seismic behavior of L-shape in plan building with TMDs mitigation system.

• Earthquakes and Structures
• /
• 제27권3호
• /
• pp.227-237
• /
• 2024

The incidence angle of seismic excitation relative to the two orthogonal major axes of structures has been a subject of considerable research interest. Previous studies have primarily focused on single-storey symmetric and asymmetric structures, suggesting a minimal effect of incidence angle on structural behavior. This research extends the investigation to multi-storey structures, including vertically irregular configurations, using a comprehensive set of 20 near fault and 20 far field seismic excitation. The study employs nonlinear time-history analysis with a bidirectional hysteresis model to capture inelastic deformations accurately. Various structural models, including one-storey and two- storey regular structures (R1, R2) and vertically irregular structures with setbacks in one direction (IR1) and both directions (IR2), are analysed. The analysis reveals that the incidence angle has no discernible impact over the response of regular multi-storey structures. However, vertically irregular structures exhibit notable responses at corner columns, which decrease towards central columns, irrespective of the incidence angle. This response is attributed to the inherent mass distribution and stiffness irregularities rather than the angle of seismic excitation. The findings indicate that for both near fault and far field seismic excitation, the incidence angle's impact remains marginal even for complex structural configurations. Consequently, the study suggests that the angle of incidence of seismic excitation need not be a primary consideration in the seismic design of both regular and vertically irregular structures. These conclusions are robust across various structural models and seismic excitation characteristics, providing a comprehensive understanding the impact of incidence angle on seismic response.

• 국제강구조저널
• /
• 제18권5호
• /
• pp.1654-1665
• /
• 2018

In an irregular prism tensegrity, the number of force equilibrium equations is less than the number of unknown parameters of nodal coordinates and member force ratios. As a result, the form-finding process normally becomes nonlinear with additional conditions or needs to be carried out with the use of iterative procedures. For cases of irregular prism tensegrity which involves large number of members, it was found that previously proposed methods of form-finding are not practical. Moreover, there is a need for a form-finding approach which is able to cater to different requirements on final configuration. In this paper, the length relation condition is introduced to be used in combination with the force equilibrium equation. With the combined use of length relation and equilibrium conditions, a linear form-finding approach for irregular prism tensegrity was successfully formulated and developed. An easy-to-use interactive form-finding tool has been developed which can be used for form-finding of irregular prism tensegrities with large number of elements as well as under diverse specific requirements on their configurations.

• Earthquakes and Structures
• /
• 제14권4호
• /
• pp.305-312
• /
• 2018

Significant research efforts were undertaken to evaluate seismic performance of vertically irregular buildings on flat ground. However, there is scarcity of study on seismic performance of buildings on hill slopes. The present study attempts to investigate seismic behaviour of reinforced concrete irregular stepback building frames with different configurations on sloping ground. Based on extensive regression study of free vibration results of four hundred seventeen frames with varying ground slope, number of story and span number, a modification is proposed to the code based empirical fundamental time period estimation formula. The modification to the fundamental time period estimation formula is a simplified function of ground slope and a newly introduced equivalent height parameter to reflect the effect of stiffness and mass irregularity. The derived empirical formula is successfully validated with various combinations of slope and framing configurations of buildings. The correlation between the predicted and the actual time period obtained from the free vibration analysis results are in good agreement. The various statistical parameters e.g., the root mean square error, coefficient of determination, standard average error generally used for validation of such regression equations also ensure the prediction capability of the proposed empirical relation with reasonable accuracy.

• 중소기업융합학회논문지
• /
• 제6권1호
• /
• pp.25-32
• /
• 2016

현대건축의 변화와 발달에 따라 건축물의 형상은 더욱 다양해지고 비정형화 되어가는 추세에 있다. 그러나, 건축물의 내진성능에 대한 고려를 배재한 가운데 진행된 건축형상의 변화에 대한 시도는 지진 발생 시 심각한 구조적 피해를 초래할 수 있다. 따라서, 건축형상에 대한 합리적 분류를 기반으로, 보다 상세하고 발전된 내진설계 전략을 수립하는 것은 매우 중요한 기술적 대비로서의 의미가 있다. 본 연구에서는 다양한 요각모서리 형상을 갖는 수평비정형 구조물들에 대한 내진성능을 비교 검토하고자 하였다. 최대한 단순화 된 비교가 가능하도록 정형구조물 및 서로 다른 네 가지 수평비정형 구조물 모델을 선정하여 구조적 특징을 통일시키고, 각 비정형성에 대한 등가정적해석을 수행하였다. 해석 결과, 상대적으로 탁월한 정형구조물의 내진성능을 확인할 수 있었고, 수평비정형성을 반영하는 요각모서리 부분에서 상대적 응력집중 및 구조적손상이 확인되었다. 본 연구 결과를 통해 미래의 도시건축물 내진설계를 위한 내진성능 기반의 가이드라인을 제시할 수 있을 것으로 판단된다.

• Earthquakes and Structures
• /
• 제10권4호
• /
• pp.789-810
• /
• 2016

Reinforced concrete (RC) bridges with both skew and curvature are pretty common in areas with complex terrains. Existing studies have shown skewed and/or curved bridges exhibit more complicated seismic performance than straight bridges, and yet related seismic risk studies are still rare. These bridges deserve more studies in low-to-moderate seismic regions than those in seismic-prone areas. This is because for bridges with irregular and complex geometric designs, comprehensive seismic analysis is not always required and little knowledge about actual seismic risks for these bridges in low-to-moderate regions is available. To provide more insightful understanding of the seismic risks and the impact from the geometric configurations, analytical fragility studies are carried out on four typical bridge designs with different geometric configurations (i.e., straight, curved, skewed, skewed and curved) in the mountain west region of the United States. The results show the curved and skewed geometries can considerably affect the bridge seismic fragility in a complex manner, underscoring the importance of conducting detailed seismic risk assessment of skewed and curved bridges in low-to-moderate seismic regions.

• Ocean Systems Engineering
• /
• 제7권4호
• /
• pp.413-433
• /
• 2017

The dynamic and structural responses of a 1000-m long circular submerged floating tunnel (SFT) with both ends fixed under survival irregular-wave excitations are investigated. The floater-mooring nonlinear and elastic coupled dynamics are modeled by a time-domain numerical simulation program, OrcaFlex. Two configurations of mooring lines i.e., vertical mooring (VM) and inclined mooring (IM), and four different buoyancy-weight ratios (BWRs) are selected to compare their global performances. The result of modal analysis is included to investigate the role of the respective natural frequencies and elastic modes. The effects of various submergence depths are also checked. The envelopes of the maximum/minimum horizontal and vertical responses, accelerations, mooring tensions, and shear forces/bending moments of the entire SFT along the longitudinal direction are obtained. In addition, at the mid-section, the time series and the corresponding spectra of those parameters are also presented and analyzed. The pros and cons of the two mooring shapes and high or low BWR values are systematically analyzed and discussed. It is demonstrated that the time-domain numerical simulation of the real system including nonlinear hydro-elastic dynamics coupled with nonlinear mooring dynamics is a good method to determine various design parameters.

• 한국전자파학회논문지
• /
• 제23권2호
• /
• pp.187-195
• /
• 2012

본 논문에서는 유전 알고리즘에 기반하여 선형 위상 배열 안테나에서 합성 빔의 부엽 세기를 최소화하기 위한 부배열 구조 최적화 기법을 제안한다. 부배열 구조의 최적 설계 시 부배열 구성에 적용이 가능하도록 유전 알고리즘의 연산을 수정하였다. 제안된 부배열 설계법을 이용하여 40개의 배열 소자를 갖는 선형 배열 안테나에서 합성 빔 및 재밍에 대한 적응 신호 처리 후의 부엽 세기를 최소로 하는 불규칙 구조의 16개로 구성된 부배열구조를 설계하였고, 규칙적인 부배열 구조에서의 최대 부엽 세기보다 약 10 dB 감소된 부엽 세기를 확인하였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1989년도 제4회 파동 및 레이저 학술발표회 4th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.235-241
• /
• 1989

Static according tests were carried out on a series of amorphous TbFe thin films of various composition under a constant laser irradiation condition. Examination of recorded domain configurations by using polarizing microscope led to the categorization of domain characteristics into 3 distinctly different types; i.c., type A: circular domains with smooth boundaries, the size not sensitive to variation of bias field, type B: domains of irregular shape at low bias, the size increasing and the boundaries getting smoother and more circular with increasing bias field and type C: not recordable. Critical factor which distinguishes among each types was fond to be the relative magnitude of H and H of the film near T, regardless of constituent atomic species. Micromagnetical process of thermomagnetic recording cycle was analyzed scheniatically for each type.

• Advances in nano research
• /
• 제16권2호
• /
• pp.201-215
• /
• 2024

The present research study emphasizes the utilization of mathematical simulation on a nanoelectromechanical systems (NEMS) sensor to facilitate the detection of injuries in players and equipment. Specifically, an investigation is conducted on the thermal buckling behavior of a small-scale truncated conical, cylindrical beam, which is fabricated using porous functionally graded (FG) material. The beam exhibits non-uniform characteristics in terms of porosity, thickness, and material distribution along both radial and axial directions. To assess the thermal buckling performance under various environmental heat conditions, classical and first-order nonlocal beam theories are employed. The governing equations for thermal stability are derived through the application of the energy technique and subsequently numerically solved using the extended differential quadratic technique (GDQM). The obtained results are comprehensively analyzed, taking into account the diverse range of effective parameters employed in this meticulous study.