• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.65-66
• /
• 2008

This paper proposes a compensating algorithm for the secondary current of the measurement current transformer (CT) that removes the effects of the hysteresis characteristics of the iron-core. The exciting current resulting from the hysteresis characteristics of the core causes an error between the primary current and the secondary current of the CT. The proposed algorithm decomposes the exciting current into the magnetizing current and the core loss current and each of them is estimated. The core loss current is calculated from the secondary voltage and the secondary voltage-core loss current curve. The core flux linkage is calculated and then inserted into the flux-current curve to estimate the magnetizing current. The exciting current at every sampling interval is obtained by summing the core-loss and magnetizing currents and then added to the measured current to compensate the secondary current. The performance of the proposed algorithm is validated under various conditions using EMTP generated data. The test results of the real CT were also included. The results indicate that the proposed algorithm can improve the accuracy of the measurement CT significantly, and thus reduce the size and the cost of the CT.

• Journal of the Korean Magnetics Society
• /
• v.22 no.5
• /
• pp.167-172
• /
• 2012

In order to analyze the formation mechanism of iron oxide nanoparticles, we measured the heat flow of $Fe(OL)_3$ precursor with temperature, and TEM images and AC susceptibility of aliquots samples sequentially taken from the reaction solution, respectively. The thermal decomposition of two OL-chain from $Fe(OL)_3$ produced the Fe-OL monomer, which were contributed to the formation of iron oxide nanoparticles. In the initial stage of nanoparticles formation, the small iron oxide nanoparticles had ${\gamma}-Fe_2O_3$ structure. However, as the iron oxide nanoparticles were rapidly growth, the iron oxide nanoparticles showed ${\gamma}-Fe_2O_3$-FeO core-shell structure which the FeO layer was formed on the surface of ${\gamma}-Fe_2O_3$ nanoparticles by insufficient oxygen supply from the reaction solution. These nanoparticles were transformed to $Fe_3O_4$ structure by oxidation during long aging time at high temperature. Finally, the $Fe_3O_4$ nanoparticles with high saturation magnetization and stable in the air could be easily synthesized by the thermal decomposition method.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.50-52
• /
• 2008

In this paper, we investigated the iron losses in the rotor core of interior permanent magnet synchronous machine (IPMSM), which have distributed armature windings. From the analysis results, we can conclude that iron losses of rotor are definitely large at load condition if the number of slots per pole is fractional. Since the slot-pole combination may induce excessive heating, particular care should be necessary in design of PMSM for a high power rating application such as electric vehicles.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.285-288
• /
• 1996

Iron loss is a possible source of performance deterioration, especially for a torque regulation, in field oriented induction machine. In this paper, study on the model of an induction machine with iron losses, a flux estimation strategy, the design of direct and indirect field oriented controller, a precise torque regulation scheme and the determination of a core lost resistance are discussed. Simulation and experimental results are also included and show the effectiveness of the proposed analysis and the proposed control strategy.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.697-700
• /
• 2001

Iron is an essential nutrient for most organisms, which supplied to them in a protein-iron complex known as ferritin. Ferritins are multimeric proteins found in prokaryotes, plants and animals. They are consisted of spherical shell of 24 subunits defining a cavity of about 8nm in diameter, where an iron core is laid down. Expression of ferritin in recombinant E. coli at $37^{\circ}C$ led to the accumulation of recombinant ferritin. Insoluble form of ferritin was separated from disrupted cells, followed by various primary separation steps with two kinds of buffers. Collected samples from the primary steps were purified by DEAE-cellulose gels packed in a column. The fractions from the DEAE column were assayed to gain the amount and the purity of ferritin by using HPLC and SDS-PAGE.

• Tribology and Lubricants
• /
• v.23 no.1
• /
• pp.19-28
• /
• 2007

Mechanical Brake system is inevitable equipment for stability of train and speed of the train. Especially brake disk and brake pads are core parts of mechanical brake system. It was investigated with tribological characteristics of brake discs for train by using lab-scale dynamometer. Gray cast iron disk was most attacked with sintered brake pad. Alloyed steel disk and NCM cast iron disk had suitable friction coefficient, high stability and low disk attack to the sintered brake pad. But at the view of economy, low alloyed cast iron will be most suitable choice.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.742-744
• /
• 2001

Moving flat core LOA consists of iron flat core as a mover and electric magnet as a stator and operated by electromagnetic force between mover and stator. In a moving flat core type, it takes advantage of doing not have to be equipped with power supply device, having a lower manufacturing cost. But it has a lower linearity and precision. In this paper, a static characteristics of LOA were studied and analyzed using FEA. Experiments, electromagnetic force and inductance according to air gap and input currents, were carried by exciting coil. And we compared these results one another.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.5
• /
• pp.70-75
• /
• 2014

Permanent magnets have recently been considered as device that can be used to control the behavior of mechanical systems. Neodymium magnets, a type of permanent magnet, have been used in numerous mechanical devices. These are permanent magnets made from an alloy of neodymium, iron, and boron to form the Nd2Fe14B tetragonal crystalline structure. The magnetic selection, magnet core design and mechanical errors of the magnetic component can affect the performance of the magnetic force. In this study, the coercive force, residual induction, and the dimensions of the design parameters of the magnet core are optimized. The design parameters of magnet core are defined as the gap between the magnet and the core, the upper contact radius, and the lower thickness of the core. The force exercised on a permanent magnet in a non-uniform field is dependent on the magnetization orientation of the magnet. Non-uniformity of the polarization direction of the magnetic has been assumed to be caused by the angular error in the polarization direction. The variation in the magnetic performance is considered according to the center distance, the tilt of the magnetic components, and the polarization direction. The finite element method is used to analyze the magnetic force of an optimized cylindrical magnet.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.12a
• /
• pp.154-154
• /
• 2003

• Journal of Microbiology and Biotechnology
• /
• v.12 no.4
• /
• pp.622-627
• /
• 2002

Diphtheria toxin repressor (DtxR) binds to approximately 30 to 35-bp regions containing an interrupted 9-bp inverted repeat within a 19-bp core sequence. The core sequence is fairly conserved and critical for DtxR binding. The flanking regions that are consisted of 5 to 8 more of nucleotides from the core are also required for DtxR binding. The nucleotides in both flanking regions are A-T rich. To examine whether the A-T nucleotides in both flanking regions from the core have significant roles for DtxR binding, a DNA fragment was constructed based on the diphtheria tox promoter/operator, and DNA fragments with substitution of A and T nucleotides In the flanking regions to G and C were also constructed. To assess the effect of these substitutions on binding of DtxR and repressibility by DtxR, $\beta$-galactosidase activity from lacZ fused to the region was assessed. Gel mobility shift of the region by purified DtxR was also examined. The DNA fragments containing the mutations in the flanking regions still exhibited repression and mobility shift with DtxR. The core segment with the mutation is still, therefore, recognized by DtxR. Nonetheless, the results from the assays indicated that the substitution significantly decreased repression of the operator by DtxR in vivo under high-iron condition and decreased binding of DtxR to the operator. These results suggest that A and T nucleotides fur both flanking regions are preferred for the binding of DtxR.