• Environmental Analysis Health and Toxicology
• /
• v.25 no.1
• /
• pp.27-40
• /
• 2010

The current study was designed to scientifically evaluate the atmospheric particulate pollution in residences relative to their proximity to a Korean major iron/metal industrial complex (IMIC). This objective was achieved by measuring the concentrations and elemental composition of particulate matter with aerodynamic diameters equal to or less than 10 ${\mu}m$(PM10) in industrial ambient air from IMIC and residential ambient air with relative proximities to IMIC. The trace metals were analyzed using an inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The industrial mean values exceeded the Korean year/70-${\mu}g/m^3$ standard for PM10, whereas the residential mean values did not. However, the maximum residential values did exceed or were close to the Korean PM10 year standard. For individual elements, the ambient concentrations ranged widely from values in the order of a few $ng/m^3$ to thousands of $ng/m^3$. The residential mean mass concentrations in the PM10 measured in the present study were higher than or similar to those reported in earlier studies. This study suggests that residents in neighborhoods near the IMIC are exposedto elevated particulate levels compared to residents living further away from such a source.

• International Journal of Advanced Culture Technology
• /
• v.12 no.2
• /
• pp.334-344
• /
• 2024

In Dangjin, Chungcheongnam-do, there are not only power plants and large steel complexes, but also small and medium-sized air pollutant emission facilities. The dust generated by these facilities has a very small particle size and a large surface area due to condensation and physical and chemical reactions, and is discharged containing various harmful substances. Therefore, this study analyzed the distribution of particulate matter and heavy metal concentrations by particle size in the vicinity of the steel complex, residential area, and reference point using an eight-stage Cascade Impactor. Overall, the direct impact sites with a short distance from the steel complex had the highest concentration, followed by the indirect impact sites, and the non-impact sites had the lowest concentration, indicating that they are directly affected by the steel complex. The atmospheric dust concentration distribution showed a bimodal distribution with a minimum value around the 1.1 to 2.1 ㎛ particle diameter. However, during the yellow dust event, the maximum concentration was biased toward coarse particles. The proportion of PM2.5 in the dust tended to be higher in winter, while the ratio between PM2.5 and PM10 was relatively higher in spring. Regardless of the location of the impact point, heavy metals in the dust were dominated by iron and aluminum, followed by zinc, lead, and manganese.

• Corrosion Science and Technology
• /
• v.17 no.5
• /
• pp.231-241
• /
• 2018

Atmospheric corrosion is generally an electrochemical degradation process of metal. It can be caused by various corrosion factors of atmospheric component, weather, and air pollutants. Moisture, particles of sea salts, and sulfur dioxide are major factors in atmospheric corrosion. Galvanizing coating is one of the most efficient ways to protect iron from corrosion by zinc plating on the surface of the iron. Galvanized steels are being widely used in automobiles, building structures, roofing, and other industrial structures due to their high corrosion resistance compared to bare iron. Atmospheric corrosion of galvanized steel has shown complex corrosion behavior depending on coating process, coating thickness, atmospheric environment, and air pollutants. In addition, different types and kinds of corrosion products can be produced depending on the environment. Lifespan of galvanized steels is also affected by the environment. Therefore, the objective of this study was to determine the corrosion behavior of galvanized steel under atmospheric corrosion at six locations in Korea. When the exposure time was increased, content of zinc from GA surface decreased while contents of iron and oxygen tended to increase. On the other hand, content of iron was constant even after 36 months of exposure of GI.

• Corrosion Science and Technology
• /
• v.18 no.3
• /
• pp.86-91
• /
• 2019

Generally, atmospheric corrosion is the electrochemical degradation of metal that can be caused by various corrosion factors of atmospheric components and weather, as well as air pollutants. Specifically, moisture and particles of sea salt and sulfur dioxide are major factors in atmospheric corrosion. Using galvanized steel is one of the most efficient ways to protect iron from corrosion by zinc plating on the surface of the iron. Galvanized steel is widely used in automobiles, building structures, roofing, and other industrial structures due to their high corrosion resistance relative to iron. The atmospheric corrosion of galvanized steel shows complex corrosion behavior, depending on the plating, coating thickness, atmospheric environment, and air pollutants. In addition, corrosion products are produced in different types of environments. The lifespans of galvanized steels may vary depending on the use environment. Therefore, this study investigated the corrosion behavior of galvannealed steel under atmospheric corrosion in two locations in Korea, and the lifespan prediction of galvannealed steel in rural and coastal environments was conducted by means of the potentiostatic dissolution test and the chemical cyclic corrosion test.

• Macromolecular Research
• /
• v.10 no.2
• /
• pp.103-107
• /
• 2002

High purity water soluble chitosans (WsCs) were employed as a flocculant to remove heavy metal ions from wastewater of industrial plating wastewater treatment complex. Their weight average molecular weights and polydispersities were 272,000~620,000 g/mol and 1.4~1.9 range, respectively and were readily soluble in water in the pH range of 3~11. Heavy metal ions such as chromium, iron and copper were removed well by WsCs. When WsCs was blended with either sodium N, N-diethyldithiocarbamate trihydrate (SDDC$_{T}$) or sodium salicylate (SSc), the removal efficiency was further increased primarily due to the excess amount of hydrophilic sulfonic and carboxylic groups. Especially, in the case of WsCs-SSc the remaining chromium and copper concentrations were 0.1 mg/L and 9.5 mg/L, which are 1/15 and 1/3 compared with that of pure WsCs, respectively. The former is within the acceptable limit, but the latter is not. Therefore, the effective copper flocculant remains to be studied.d.

• Resources Recycling
• /
• v.27 no.3
• /
• pp.48-57
• /
• 2018

In this study, we developed a method for manufacturing high strength gray cast irons by adding a rare earth element (R.E.) included in a spent permanent magnet scrap to gray cast irons. The improvement of the mechanical properties of gray cast irons is attributed to A-type graphite formation promoted by complex sulfide, which was formed by R.E. in the spent magnets during a solidification process. The cast specimen inoculated by R.E. in the spent magnet scrap showed excellent tensile strength up to 306 MPa, and is similar to that of the specimen inoculated by expensive misch-metal. In this regards, we concluded that the cheap spent magnets scrap is a very efficient inoculation agent in fabrication of high performance gray cast irons.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.4
• /
• pp.281-295
• /
• 2010

This paper deals with magnetic susceptibility, mineralogy, soil properties (pH, EC, CEC, loss on ignition), iron and manganese oxides, the content and partitioning of heavy metals (As, Cd, Cr, Cu, Ni, Pb, Zn), and their mutual relationship in the soil samples of an unpolluted, abandoned mine area, and industrial complex area. The various minerals derived from weathered bedrock were identified by X-ray diffraction in the unpolluted soil samples, except for the magnetic minerals. XRD analysis also revealed the existence of hematite and magnetite related to mine tailings and waste rocks in the abandoned mine area samples. The industrial complex area samples had carbonate minerals, such as calcite and dolomite, that might be due to anthropogenic deposition. The sum of the reducible, oxidizable, and residual fractions was over 80% for the abandoned mine area samples and over 50% for the industrial complex area samples using the sequential extraction method. The industrial complex area samples had a relatively high carbonate fraction that was associated with carbonate minerals. The content of aqua regia-extractable Fe, Mn, As, and Zn had a high positive correlation with the content of the dithionite-citrate-bicarbonate (DCB)-extractable method related to Fe/Mn oxide phases. The 54% and 58% of aqua regia-extractable Fe and As content, respectively, acted together with the concentrations of the DCB-extractable phases. Magnetic susceptibility values of total samples ranged from 0.005 to $2.131{\times}10^{-6}m^3kg^{-1}$. The samples including iron oxide minerals, such as hematite and magnetite, had a high magnetic susceptibility. The magnetic susceptibility showed a significant correlation with the heavy metals, Cd (r=0.544, p<0.05), Cr (r=0.714, p<0.01), Ni (r=0.645, p<0.05), Pb (r=0.703, p<0.01), and Zn (r=0.496, p<0.01), as well as Fe (r=0.608, p<0.01) and Mn (r=0.615, p<0.01). The aqua regia-extractable Fe and Mn content had a significant positive correlation with Cd, Cr, Cu, Ni, and Zn. However, the DCB-extractable Fe and Mn content had a significant positive correlation with As and Ni, indicating that the heavy metals were associated with Fe and Mn oxide minerals.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.34 no.3
• /
• pp.193-201
• /
• 2024

Objectives: Paints contain various types of metal substances. However, our review of MSDS (Material Safety Data Sheets) for paints found that their components were often kept secret or exact content information was otherwise not provided. We analyzed the metal elements in various inorganic pigment-based paints available in South Korea in this study and checked whether they contain hazardous metal substances as defined by the Occupational Safety and Health Acts. We investigated issues of health hazard classification related to the metal elements. The study is intended to contribute to strengthening the management of hazardous substances by suggesting improvements to MSDS. Methods: We randomly selected 19 samples that were predicted to contain hazardous inorganic pigments after reviewing MSDS among paints currently in use. The samples were analyzed using XRF (X-ray Fluorescence spectrometry), ICP_OES (Inductively Coupled Plasma-Optical Emission Spectroscopy) and SP-ICP-MS (Single Particle-ICP-Mass Spectroscopy). Results: The most common elements in the samples were Al (aluminum), Fe (iron), Ti (titanium), Ca (calcium), and Si (silica). One sample contained more lead than allowed by the limits. There were ten samples that could potentially contain nanoforms, seven samples that contained titanium dioxide, and six samples that contained complex inorganic color pigments (CICPs). Conclusions: Inorganic pigments in paints should be evaluated for hazards separately from other metallic compounds and reflected in the MSDS because they have different characteristics than other metallic compounds. These include particle size, crystal structure, and complex substances. The results of this study can be helpful for determining whether a paint contains sufficient hazardous metal compounds to affect its classification, and it can be a guideline for improving MSDS through comparative review and rationalization with the manufacturer's MSDS. This would make it possible to contribute to the management of chemical substances in the workplace through the proper MSDS disclosure of paints.

• Applied Chemistry for Engineering
• /
• v.4 no.1
• /
• pp.171-177
• /
• 1993

In decontamination process to remove radioactive materials of reactor cooling system, the metal ions dissolved by organic acids in decontamination solution are separated by use of ion exchange resin in the column. However, organic acids in decontamination solution decrease the apparent affinity of the resin to metal ions. In light of this, some experiments were carried out on the Amberlite IRN-77 cation resin with cobalt and iron to gain a better understanding of the complexation effects on the ion exchange process. Experimental results showed that EDTA among organic acids used as chemical decontaminants predominantly caused reduction of ion exchange capacity of cobaltous ion to resin since this reagent formed the complex with the cobaltous ion stronger than that with the ferrous ion. In contrast, the effects of oxalic acid and citric acid were found to be negligible. And, single and two-component nonlinear equilibrium relationships of the metal ions were established using experimental data.

• Economic and Environmental Geology
• /
• v.29 no.1
• /
• pp.87-103
• /
• 1996

The purposes of this research are to investigate the pollution level of heavy metals due to the urbanization and industrialization in the satellite cities of Seoul, and to assess the chemical species and the sources of heavy metals in highly contaminated soils and dusts. Soil and dust samples were collected from the Uijeongbu and the Koyang cities, which are northern and the northwestern satellite cities of Seoul metropolitan city, respectively. Relatively high pH values($6.3{\sim}9.9$) were found in roadside soils compared with agricultural and forest soils. Difference in pH values of soils was not identified between before and after rainy seasons. In spite of no specific pollution sources in the above cities, the contents of Cu, Pb, and Zn in soils and dusts were much higher than the world average contents. The metal levels in dusts were higher than those in soils, but the metal concentration in dusts was significantly decreased after rainy season. Pollution index was high(> 1.0) in the areas of heavy traffic, industrial complex, and city centres. There is an appreciable proportion of total Zn in exchangeable/water-acid soluble fraction. Copper is predominantly associated with reducible and oxidizable phases, whereas Pb is largely in reducible association. It is concluded that the mobility and bioavailability of metals are high in the order of Zn >> Cu > Pb, on the basis of characteristic particle morphology and chemical composition, Pb-containing particles are originated probably from the automobile exhaust, particularly in heavy traffic areas. The metallic forms and iron-oxide associated forms of Cr, Ni, Cu, Zn, and Pb can be assessed as industrial origin.