• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.9
• /
• pp.871-877
• /
• 2012

An error analysis of PPP (Precise Point Positioning) using IF (Ionosphere Free) combination is given in this paper. It is shown that the performance of the ordinary model with positions, clock bias, integer ambiguities and ionosphere delay as unknowns is equivalent to that of an ionosphere difference combination where ionosphere delay is cancelled out. Furthermore, it is shown that IF combination is an ionosphere difference combination but not unique. It is also proved that all difference models show same performances. The error analysis evaluated with a hardware simulator and real measurements show that the ionosphere delay is effectively eliminated by IF combination or equivalently by the ionosphere difference combination. However, if bias errors such as troposphere, clock bias or multipath are included in the measurements, the performance of the IF combination is degraded because the bias errors are amplified by the ionosphere difference operation.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.4
• /
• pp.359-367
• /
• 2023

In order to ensure the high-integrity of reference stations of satellite navigation system, cycle slip should be precisely monitored and compensated. In this paper, we proposed a cycle slip algorithm for the integrity monitoring of the reference stations. Unlike the legacy method using the Melbourne-Wübbena (MW) combination and ionosphere combination, the proposed algorithm is based on ionosphere combination only, which uses high precision carrier phase observations without pseudorange observations. Two independent and complementary ionosphere combinations, Ionospheric Negative (IN) and Ionospheric Positive (IP), were adopted to avoid insensitive cycle slip pairs. In addition, a second-order time difference was applied to the IN and IP combinations to minimize the influence of ionospheric and tropospheric delay even under severe atmosphere conditions. Then, the cycle slip was detected by the thresholds determined based on error propagation rules, and the cycle slip was identified through weighted least square method. The performance of the proposed cycle slip algorithm was validated with the 1 Hz dual-frequency carrier phase data collected under the difference levels of ionospheric activities. For this experiment, 15 insensitive cycle slip pairs were intentionally inserted into the raw carrier phase observations, which is difficult to be detected with the traditional cycle slip approach. The results indicate that the proposed approach can successfully detect and compensate all of the inserted cycle slip pairs regardless of ionospheric activity. As a consequence, the proposed cycle slip algorithm is confirmed to be suitable for the reference station where real time high-integrity monitoring is crucial.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.2
• /
• pp.157-166
• /
• 2023

Several experiments were carried out to analyze the impact of the modernized Global Positioning System (GPS) L2C signal on pseudorange-based point positioning. Three dual-frequency positioning algorithms, ionosphere-free linear combination, ionospheric error estimation, and simple integration, were used, and the results were compared with those of Standard Point Positioning (SPP). An analysis was conducted to determine the characteristics of each dual-frequency positioning method, the impact of the magnitude of ionospheric error, and receiver grade. Ionosphere-free and ionospheric error estimation methods can provide improved positioning accuracy relative to SPP because they are able to significantly reduce the ionospheric error. However, this result was possible only when the ionospheric error reduction effect was greater than the disadvantage of these dual-frequency positioning algorithms such as the increment of multipath and noise, impact of uncertainty of unknown parameter estimation. The RMSE of the simple integration algorithm was larger than that of SPP, because of the remaining ionospheric error. Even though the receiver grade was different, similar results were observed.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.183-185
• /
• 2010

There are many error sources in GPS signal propagation because the signals do not propagate in vacuum. The GPS observations should be preprocessed before they are used for positioning. The cycle slip and outlier detection algorithms are tested in this study in RINEX level using various linear combinations of the observables. The elbourne-Wubbena (M-W) linear combination has an advantage of long wavelength with low noise, and the geometry-free and ionosphere-free linear combinations are used as well to clean the measurements.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.616-622
• /
• 2018

Energy which is released by a huge earthquake can reach the ionosphere and induce disturbances. Those disturbances can detected by analyzing the global navigation satellite system (GNSS) satellite's signal. For detecting those disturbances, band-pass filter is generally used. Therefore, it is important to select proper pass band that can contain disturbance's frequency. In this paper, we analyzed a frequency of the ionospheric disturbances which are induced by earthquake by using GNSS signal. For analyzing seismogenic ionospheric disturbances, we calculated a geometry free combination of carrier phase to obtain a ionospheric delay. After that, the fast Fourier transform was applied to the 1 mHz high-passed ionospheric delay. As a result of analyzing disturbances, the frequency band of earlier disturbances was 4.5 mHz~11mHz and the representative frequency was 5.7 mHz. The frequency band of subsequent disturbances was 6 mHz~10 mHz and the representative frequency was 7.3 mHz.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2601-2610
• /
• 2013

The main limiting factors of Precise Point Positioning(PPP) accuracy are errors in broadcast satellite orbits, clock errors, and the others, which are receiver-dependent errors(ionospheric, tropospheric refraction, multipath, and tides, etc.). Therefore, to facilitate high precision PPP, precise orbits/clocks corrections, the receiver-dependent errors corrections have to apply to multi frequency GNSS measurements for an ionosphere free combination and integer ambiguity resolution in real-time. Currently, there are many Analysis Centers, which offer the precise corrections stream computed in real-time using the global or regional GNSS tracking network. The goles of this research considered performances of the real-time static PPP with using RTCM corrections from NTRIP casters. For this, the corrections streams of Analysis Centers received via NTRIP does apply to GNSS data of check points individually, as well as jointly, in accordance with various session lengths. After that, have compared the PPP results from the corrections streams with each other, and with Standard Point Positioning(SPP) results.