• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.475-481
• /
• 2013

By using ionic liquid 1-hexylpyridinium hexafluorophosphate ($HPPF_6$) based carbon ionic liquid electrode (CILE) as the substrate electrode, a $CoMoO_4$ nanorods and myoglobin (Mb) composite was casted on the surface of CILE with chitosan (CTS) as the film forming material to obtain the modified electrode (CTS/$CoMoO_4$-Mb/CILE). Spectroscopic results indicated that Mb retained its native structures without any conformational changes after mixed with $CoMoO_4$ nanorods and CTS. Electrochemical behaviors of Mb on the electrode were carefully investigated by cyclic voltammetry with a pair of well-defined redox peaks from the heme Fe(III)/Fe(II) redox center of Mb appeared, which indicated that direct electron transfer between Mb and CILE was realized. Electrochemical parameters such as the electron transfer number (n), charge transfer coefficient (${\alpha}$) and electron transfer rate constant ($k_s$) were estimated by cyclic voltammetry with the results as 1.09, 0.53 and 1.16 $s^{-1}$, respectively. The Mb modified electrode showed good electrocatalytic ability toward the reduction of trichloroacetic acid in the concentration range from 0.1 to 32.0 mmol $L^{-1}$ with the detection limit as 0.036 mmol $L^{-1}$ ($3{\sigma}$), and the reduction of $H_2O_2$ in the concentration range from 0.12 to 397.0 ${\mu}mol\;L^{-1}$ with the detection limit as 0.0426 ${\mu}mol\;L^{-1}$ ($3{\sigma}$).

• Bulletin of the Korean Chemical Society
• /
• v.25 no.7
• /
• pp.1031-1035
• /
• 2004

The adsorption kinetics of ${\beta}$-casein on a hydrophobic surface has been studied by means of the quartz crystal microbalance (QCM). The self assembled monolayer of 1-octadecanethiol on a gold coated quartz crystal was used as a hydrophobic surface for adsorption. The adsorption kinetics was monitored in different solution conditions. Formation of monolayer is observed in most cases. At high concentration of protein, micelle formation which is interrupted by high ionic strength of solution is observed. Casein binding cations such as $Ca^{2+},\;Ba^{2+}\;and\;Al^{3+}$ increase the hydrophobicity of the protein and the multiple layer adsorption occurs. The strong and weak points of the QCM method in the study of protein adsorption are discussed.

• Analytical Science and Technology
• /
• v.28 no.1
• /
• pp.8-16
• /
• 2015

We prepared a novel electrochemical gas sensor (EG sensor) based on interdigitated electrode (IDE) coated with vinyl ionic liquids (ILs) as electrolyte and Pt-Ru-Mo/MWNT electrocatalysts for occurring redox-active of CNCl gas. The vinyl ILs such as 1-butyl-3-(vinylbenzyl)imidazolium chloride, $[BVBI]^+Cl^-$, and 3-hexyl-1-vinylimidazolium bromide, $[HVI]^+Br^-$, were synthesized by $SN_2$ reaction in order to use electrolyte. The Pt-Ru-Mo/MWNT electrocatalysts were also prepared by one-step radiation-induced reduction of metal ions in the presence of MWNTs as supports. The fabricated EG sensor with vinyl ILs electrolyte was evaluated through optical microscopy (OM), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The prepared EG sensor is clearly detected over 2.0 ppm CNCl gas and is exhibited a liner relationship between current and concentration over a region of 10-100 ppm.

• Journal of the Korean Ceramic Society
• /
• v.31 no.3
• /
• pp.241-248
• /
• 1994

The ionic conductivity in glassy systems were calculated as functions of temperature and ion concentration using Monte-Carol method considering interaction between neighbouring ion-site occupancies, {{{{ rho }}'s. Also the vacancy availability factor, V, the effective jump frequency factor, W, and the charge correlation factor, fc, have been investigated. The Arrhenius plot could be obtained from the ln {{{{ sigma }}T vs. 1/T* plots and was in exellent agreement with the experimental observations. The effects of the various types of potential well on the ionic conductivity have been considered. The activation energy Eg for ion motion in the glass was 1.3│ε│from the ln {{{{ sigma }}T vs. 1/T* plots.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.7
• /
• pp.937-942
• /
• 2003

The relaxation phenomena of ionic currents through the charged membrane under the constant applied potentials has been studied. The formulation was obtained for the non stationary current by assuming that the ion mobility is independent of concentration and the potential gradient is a constant within membrane, and it was applied to the experimental results with the sulfonated polystyrene collodion base membrane. It has been shown that the initial ion distributions in the membrane play a predominant role in the relaxation phenomena.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.5
• /
• pp.399-402
• /
• 1986

The critical micelle concentration (CMC) of sodium deoxycholate (NaDC) and the effects of amides on the micellization processes have been studied by fluorometric technique using pyrene as a probe. The addition of amides as cosolvent destabilized the NaDC micelle and increased the CMC. The order of effectiveness for the perturbation of NaDC micelle was N-methylacetamide ${\ge}$ DMF > acetamide > formamide, which is the order of hydrophobicity of the amines. This indicated that the effect of amides on the micellization processes of NaDC arises from diminution of the hydrophobic effect. The electrostatic repulsion between ionic head groups in the NaDC micelle appeared to be much less than that in aliphatic ionic micelle. This was also revealed in the weaker dependence of the CMC on ionic strength. The premicellar association of NaDC was not significantly involved in the micellization processes of the bile salt.

• Journal of Electrochemical Science and Technology
• /
• v.10 no.2
• /
• pp.177-184
• /
• 2019

An electrochemical detection method for capsaicin has been developed using ionic liquid (IL) doped graphene-titania-Nafion composite-modified electrode. The combination of IL (1-hexyl-3-methylimidazolium with hexafluorophosphate counter ion) in the composite-modified electrode resulted in a significantly increased electrochemical response for capsaicin compared to that obtained at the corresponding electrode without IL. The increased electrochemical signal could be ascribed to the decreased electron transfer resistance through the composite film and also to the effective accumulation of capsaicin on the electrode surface due to ${\pi}-{\pi}$ interaction of the imidazole groups of IL with the aromatic rings of capsaicin. The present IL composite-modified electrode can detect capsaicin with a concentration range from $3.0{\times}10^{-8}M$ to $1.0{\times}10^{-5}M$ with a detection limit of $3.17{\times}10^{-9}M$ (S/N = 3). The present sensor showed good reproducibility (RSD = 3.2%).

• Korean Journal of Metals and Materials
• /
• v.46 no.1
• /
• pp.20-25
• /
• 2008

The ionic equilibira in mixed solutions of cuprous and cupric chloride were analyzed by considering chemical equilibria, mass and charge balance equations. The activity coefficients of solutes were calculated by using Bromley equation. Required thermodynamic constants and interaction parameters were evaluated from the data reported in the literature. The effect of NaCl and CuCl concentrations on the pH and potential of the mixed solutions was explained in terms of the variation in the concentration of solutes and in the activity of hydrogen ion. The calculated pH values of the mixed solutions agreed well with the measured values. However, the calculated values for the potential of the mixed solutions were lower than the measured values, indicating the necessity of considering the complex formation between cuprous and chloride ion, such as $Cu^2Cl{_4}^{2-}$ and $Cu_3Cl{_6}^{3-}$.

• Elastomers and Composites
• /
• v.57 no.4
• /
• pp.215-221
• /
• 2022

In this study, high-penetration asphalt with low greenhouse gas emissions was used in the asphalt mixing process to reduce the carbon emissions during the reaction due to its capacity to be produced even at low temperatures. In effect, cationic, anionic, and non-ionic dispersants were added and mixed in different feeding ratios, seeking an effective dispersion of the modifiers (SIS, PS, TPEE, and SEBS) into the high-penetration asphalt matrix and forming an asphalt binder with a melting point of 120 ℃. The compatibility of the modifiers and the high-penetration asphalt was examined using SEM and DSC techniques, and the role of NDP-1 as a dispersant was carefully investigated with respect to dissolution time. The analyses showed that: (1) the dispersibility of the asphalt binder is good when the non-ionic dispersant is used; (2) as the concentration of the non-ionic dispersant increases, the dissolution time decreases and the domain size contracts; (3) the ND70-PS has the shortest dissolution time, the lowest agglomeration rate, and a single Tg value.

• Korean Journal of Plant Resources
• /
• v.16 no.3
• /
• pp.223-229
• /
• 2003

This study was carried out to investigate the optimum ionic strength of nutrient solution were treated with a quarter, a half, three quarters, standard, one and half, and double ionic strength of balanced nutrient solution of Yamazaki solution recommended for cucumber plants. Plant height and number of loaves of growing period were rapidly increased in 1/2 ionic strength of nutrient solution. Growth characteristics of cucumber plant as affected by the different ionic strength of nutrient solution were not significant differences, however, in the growing period, plant height, stem length and leaf area were highest in 1/2 ionic strength of nutrient solution. Fruit yield of cucumber plant as affected by the different ionic strength of nutrient solution was not significant differences, however, fruit yield was highest in 1/2 ionic strength of the lowering ionic strength of nutrient solution. Nitrogen concentration was not significant differences, however, it was high corcentration in 1/2 ionic strength of nutrient solution. Growth and yield characteristic of cucumber as affected by 1/2 ionic strength of nutrient solution at 36 days transplanting analyzed correlation cofficient. Plant height showed positive correlated with number of plant and positive correlated with yield.