• Proceedings of the PSK Conference
• /
• 2003.04a
• /
• pp.227.1-227.1
• /
• 2003

To assess the effect of chitosan complex with metal ion on various pathogenic bacteria, the antibacterial activities were investigated. Arsenic, bismuth, calcium, iodine, iron, mercury, platinum, and silver were used as a metal ion. Staphylococcus aureus. Streptococcus mutans, Helicobacter pylori, Propionibacterium acnes and human saliva were examined. It was demonstrated that metal ions associated chitosan showed aggregation activities on various pathogens.

• Journal of Life Science
• /
• v.21 no.12
• /
• pp.1710-1715
• /
• 2011

The bactericidal effect of nano plasma ion (NPi) which was generated by NPi was analyzed using different kinds of microorganisms, exposure times, chamber sizes, ion amounts and distance. As the result of Escherichia coli, Pseudomonas aeruginosa, Salmonella typhimurium, Klebsiella pneumoniae, Staphylococcus aureus and Bacillus subtilis were shown different in decrement. Gram-negative bacteria E. coli showed the highest percentage (96.57%) and Gram-positive bacteria B. subtilis which produced spore has the lowest percentage (57.41%). From the exposure time of NPi most of the microorganisms were extinct at an early stage. According to the size of the chamber we compared the loss of E.coli and the experiment result shown, analyzed NPi using 5 chambers $0.005m^3$ to $30m^3$ for 2 hr, that when volume of the chamber increased, saturation ion and bactericidal effect was decreased. In addition, an NPi generator installed in the $1m^3$ chamber investigated the decrement of E. coli. Saturation ion concentration increased with decrement. Finally, E. coli showed a similar reduction according to the distance from NPi generator.

• Analytical Science and Technology
• /
• v.14 no.6
• /
• pp.486-493
• /
• 2001

The effect of SIMS analysis conditions such as mesh grid, offset voltage and ion species on the in-depth profile for bismuth titanate thin film was examined in terms of charging effect and detection limit. The results shows that the use of offset voltage -40 V reduces the charging effect and the detection limit. The employment of mesh grid in sample preparation leads to the reduction of the charging effect in small amount, but deteriorate the detection limit. Utilization of primary $O^-$ ion for SIMS analysis of bismuth titanate thin film showed almost the same effect as using offset voltage -40 V. However, it takes approximately triple acquisition time than using $O_2{^+}$ ion due to the poor beam current of the source in the experiment.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.39-42
• /
• 2002

Cloride attack of concrete is one of the important causes of corrosion of reinforcing steel in concrete with carbonation and frost damage. In this paper, the effect of fly-ash on the cloride attack were investigated by varying water binder ratio and fly-ash contents according to the chloride ion penetrationa test. (ASTM C 1202-94) The principal conclusions from this research were as follows: 1) The compressive strength of concrete at large ages, depends more on $C_2$S contents of base cement than fly-ash contents. 2) On the other hand, the chloride ion penetration of concrete at large ages, principally depends on fly-ash contents and the influence of type of base cement is insignificant.

• Journal of the Korean Ceramic Society
• /
• v.25 no.4
• /
• pp.349-356
• /
• 1988

The PTCR characteristics of (Ba0.8Pb0.2)TiO3 ceramics prepared by the molten salt sysnthesis (MSS) method have been investigated as a function of the amount of Nb2O5 dopant and KCl flux. When the weight ratio of KCl to raw material is 0.8, the resistivity at room temperature decreases with increasing amount of Nb dopant up to 0.6 atom%. It can be explained by compensation for electrons due to Nb+5 ion and holes due to K+ ion. The resistivity of (Ba0.8Pb0.2)(Ti0.994Nb0.006)O3 ceramics at room temperature decreases with increasing the ratio of KCl to raw material up to 0.6, and then increases. These results can be explained by the effect of K+ ion.

• Journal of environmental and Sanitary engineering
• /
• v.17 no.2
• /
• pp.1-10
• /
• 2002

Ammonia is used in the manufacture of fertilizers, refrigerants, stabilizers and many household cleaning agents. The wide applications result in ammonia contamination in water. Ammonia can be removed from water by physical, biological, and chemical methods. Especially ozonation is effective in the treatment of water with low concentration of ammonia. Therefore, this study is undertaken to provide kinetic data for the ozonation of ammonia with bromide. The results were as follows; Ammonia oxidized by ozone with bromide catalysis. The denitrification rate of the ammonia increased proportionally to the concentration of bromide, and the overall reaction order was zero. It was also found that the effect of bromide ion concentration on the denitrification can be expressed by Monod type equation and there was no more effect above a proper bromide ion concentration. The reacted ammonia was converted completely to nitrate ion without bromide, but the denitrification of ammonia by ozone was conducted in the presence of bromide.

• Transactions of Materials Processing
• /
• v.15 no.5 s.86
• /
• pp.366-372
• /
• 2006

The effect of coating time in arc ion plating on surface properties of the TiN-coated high speed steel(SKH51) is presented in this paper. Surface roughness, micro-hardness, coated thickness, atomic distribution of TiN and adhesion strength are measured for various coating times. It has been shown that the coating time has a deep influence on the micro-hardness, the coated thickness, the atomic distribution of Ti and the adhesion strength of the SKH51 steels but that it has little influence on the surface roughness.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.106-110
• /
• 1995

Chloride ion is considered one of the most common culprits in the corrosion of steel in concrete. It breaks down the passive film and allows the steel to corrode actively at a high rate. The main objective of this study is to determine the critical chloride ion concentrations in the pore solutions and chloride binding effect of cement pastes made with and without fly ash. Cement pastes with water-ratio of 0.5 allowed to hydrate in sealed containers for 28 days and to express poresolution. T도 expressed pore fluids were analyzed for chloride and hydroxyl ion concentrations. It was found that the replaced cement with fly ash have little effect on Chloride binding capacity ratio.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.97-98
• /
• 2006

For high performance transistor in the 0.14um generation, high speed sram is using a weak region of SCE(Short Channel Effect). It causes serious SCE problem (Vth Roll-Off and Punch-Through etc). This paper shows improvement of Vth roll-off and Ion/Ioff characteristics through high concentration Pocket implant, LDD(Light Dopped Dram) and low energy Implant to reduce S/D Extension resistance. We achieve stabilized Vth and Improved transistor Ion/Ioff performance of 10%.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.308-313
• /
• 2006

The effect of coating time on surface properties of the TiN-coated high speed steel(SKH51) by arc ion plating is and presented in this paper. Surface roughness, micro-hardness, coated thickness, atomic distribution of TiN and adhesion strength are measured for various coating times. It has been shown that the coating time has a deep influence more than 60 minites on the micro-hardness, coated thickness, atomic distribution of Ti and adhesion strength of the SKH51 steels, but that the coating time has little influence on the surface roughness.