• 한국의학물리학회지:의학물리
• /
• 제7권2호
• /
• pp.57-65
• /
• 1996

피부 T 세포림프종에 대하여 4MeV 의 전자선으로 전 피부 방사선 조사를 시행하였다. 피부전체의 균일한 선량분포를 위하여 스탠포드대학의 방법으로 알려져 있는 six dual field 기법을 사용하였다. SSD 는 390cm로 하였으며 방사선 조사시의 gantry 의 각은 환자의 중심을 지나는 수평축에 대하여 상ㆍ하로 14$^{\circ}$가 되도록 하였다. 전자콘을 설치해야만 전자선 조사가 가능하므로 최대의 전자콘인 25$\times$25cm콘을 사용하였다. 치료면에서의 선량분포의 균일성을 확인하기 위하여 치료면에 90$\times$180cm의 폴리스틸렌을 설치하고 Famer type ion chamber와 측정용 필름을 사용하여 측정하였다. 그 결과 치료면에서 10% 정도의 균일함을 보였다. 환자의 자세를 하루에 세가지씩 이틀에 걸쳐 여섯가지 자세를 한 주기로 치료를 시행하였다. 선량이 부족한 정수리, 회음부, 발바닥 등은 따로 추가의 방사선을 조사하였다. 렌즈와 손톱, 발톱은 차폐물을 제작하여 차폐하였다.

• 대한치과보철학회지
• /
• 제45권6호
• /
• pp.795-804
• /
• 2007

Statement of problem. Nano-scale calcium-phosphate coating on the anodizing titanium surface using ion beam-assisted deposition (IBAD) has been recently introduced to improve the early osseointegration. However, not much is known about their surface characteristics that have influence on tissue-implant interaction. Purpose. This study was aimed to investigate microtopography, surface roughness, surface composition, and wettability of the titanium surface modified by the anodic oxidation and calcium phosphate coating using IBAD. Material and methods. Commercially pure titanium disks were used as substrates. The experiment was composed of four groups. Group MA surfaces represented machined surface. Group AN was anodized surface. Group CaP/AN was anodic oxidized and calcium phosphate coated surfaces. Group SLA surfaces were sandblasted and acid etched surfaces. The prepared titanium discs were examined as follows. The surface morphology of the discs was examined using SEM. The surface roughness was measured by a confocal laser scanning microscope. Phase components were analyzed using thin-film x-ray diffraction. Wettability analyses were performed by contact angle measurement with distilled water, formamide, bromonaphtalene and surface free energy calculation. Results. (1) The four groups showed specific microtopography respectively. Anodized and calcium phosphate coated specimens showed multiple micropores and tiny homogeneously distributed crystalline particles. (2) The order of surface roughness values were, from the lowest to the highest, machined group, anodized group, anodized and calcium phosphate deposited group, and sandblasted and acid etched group. (3) Anodized and calcium phosphate deposited group was found to have titanium and titanium anatase oxides and exhibited calcium phosphorous crystalline structures. (4) Surface wettability was increased in the order of calcium phosphate deposited group, machined group, anodized group, sandblasted and acid etched group. Conclusion. After ion beam-assisted deposition on anodized titanium, the microporous structure remained on the surface and many small calcium phosphorous crystals were formed on the porous surface. Nanoscale calcium phosphorous deposition induced roughness on the microporous surface but hydrophobicity was increased.

• Applied Microscopy
• /
• 제46권1호
• /
• pp.14-19
• /
• 2016

Currently, focused ion beams (FIB) are widely used for specimen preparation in atom probe tomography (APT), which is a three-dimensional and atomic-scale compositional analysis tool. Specimen preparation, in which a specific region of interest is identified and a sharp needle shape created, is the first step towards successful APT analysis. The FIB technique is a powerful tool for site-specific specimen preparation because it provides a lift-out technique and a controllable manipulation function. In this paper, we demonstrate a general procedure containing the crucial points of FIB-based specimen preparation. We introduce aluminum holders with moveable pin and an axial rotation manipulator for specimen handling, which are useful for flipping and rotating the specimen to present the backside and the perpendicular direction. We also describe specimen preparation methods for nanowires and nanopowders, using a pick-up method and an embedding method by epoxy resin, respectively.

• Applied Microscopy
• /
• 제45권4호
• /
• pp.218-224
• /
• 2015

A technical overview on the various sample preparation methods for electron backscattered diffraction (EBSD) analysis is carried out. The mechanical polishing with colloidal silica finish, electro-chemical polishing, dual layer coating and ion beam milling are introduced for the common sample preparation methods for EBSD observation and some issues that are frequently neglected by the common EBSD users but should be considered to get a reliable EBSD data are discussed. This overview would be especially helpful to the people who know what EBSD technique is but do not get a reliable EBSD data because of difficulties in sample preparation.

• 전기의세계
• /
• 제29권2호
• /
• pp.118-128
• /
• 1980

The properties of plasmas produced by high power glass laser were investigated with various methods of diagnostics. Electron temperature was estimated by measurement of soft X-ray, and ion temperature was estimated by measurement of the time-of-flight of ion. The measurement of incident and reflected laser light, and Schlieren and shadowgragh methods were also used. No influence of laser pulse duration on the temperature was observed in the case of durations 2, 4 and 10 nsecs. The effective heating of plasma occurred in about 2 nsec of beginning of incident laser pulse. The experimental results for fast rising laser pulse were discussed and the influence of resetime of laser pulse on the heating of plasma was described. Neutrons produced by irradiating laser beam to solid deuterium target were detected.

• 한국진공학회지
• /
• 제6권S1호
• /
• pp.133-136
• /
• 1997

In this paper multi-arc plasma plating film equipment Bulat-6 and its technical characteristics were analyzed in detail. This machine is the first of its kind in China. Influential factors and reducing methods on microdroplets of titanium were investigated. By method of electromagnetic field control and ion beam enhanced deposition excellent titanium nitride film could be obtained. Bicrohardness and adhesion were 250Mpa and 6.5Kg respectively.

• 광물과 암석
• /
• 제33권4호
• /
• pp.419-426
• /
• 2020

비전통 저류층에서 에너지 자원의 회수율을 높이기 위해서는 저류층 내의 미세 공극 형태와 연결도 등을 포함하는 공극 구조 연구가 필수적이다. 본 연구에서는 셰일 저류층 내 나노스케일의 공극 구조 연구에 적합한 조건과 방법을 찾기 위해 집속 이온 빔 시스템(Focused Ion Beam, FIB)과 이온 밀링 시스템(Ion Milling System, IMS)을 이용하여 분석을 진행하였다. 셰일 저류층 내 공극 구조 연구를 위해 리아드 분지에서 획득된 A-068 시추공의 시료를 사용하였다. 각 시료마다 특성이 다르기 때문에 시료 전처리 방법과 조건을 달리하여 최적의 조건을 찾았고 FE-SEM을 이용하여 공극 이미지를 획득하였다. 연구 결과 국소 부위의 공극구조를 관찰하기 위해서는 FIB를 사용하여 시표 표면을 밀링 후 바로 공극 이미지를 얻는 것이 효율적이고 반면에 넓은 면적을 단시간에 밀링하여 여러 공극 구조를 관찰하기 위해서는 IMS를 이용해야 한다는 것을 확인했다. 특히 탄산염 광물 함량이 높고 강도가 큰 암석에 대해서는 FIB보다는 IMS를 활용하여 밀링을 수행해야 공극 구조 관찰이 가능하다는 사실이 밝혀졌다. 본 연구를 통해 셰일 저류층 내 공극 구조 관찰을 위한 방법이 정립되었으며 향후 이를 이용한 셰일 가스 저류층 시료 분석을 통해 공극의 크기나 형태가 셰일가스 회수 증진에 미치는 영향을 밝힐 수 있을 것이다.

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.2854-2863
• /
• 2023

Objective: To present a hybrid approach that incorporates a constrained beam-hardening estimator (CBHE) and deep learning (DL)-based post-refinement for metal artifact reduction in dental cone-beam computed tomography (CBCT). Methods: Constrained beam-hardening estimator (CBHE) is derived from a polychromatic X-ray attenuation model with respect to X-ray transmission length, which calculates associated parameters numerically. Deep-learning-based post-refinement with an artifact disentanglement network (ADN) is performed to mitigate the remaining dark shading regions around a metal. Artifact disentanglement network (ADN) supports an unsupervised learning approach, in which no paired CBCT images are required. The network consists of an encoder that separates artifacts and content and a decoder for the content. Additionally, ADN with data normalization replaces metal regions with values from bone or soft tissue regions. Finally, the metal regions obtained from the CBHE are blended into reconstructed images. The proposed approach is systematically assessed using a dental phantom with two types of metal objects for qualitative and quantitative comparisons. Results: The proposed hybrid scheme provides improved image quality in areas surrounding the metal while preserving native structures. Conclusion: This study may significantly improve the detection of areas of interest in many dentomaxillofacial applications.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권3호
• /
• pp.1-5
• /
• 2016

Ion-beam assisted deposition (IBAD) technology has been successfully applied to high-temperature superconductor coated conductors (CC) as textured substrates. Since the coated conductors were proposed as a potential framework for utilizing the superior transport characteristics of $YBa_2Cu_3O_7$ and related cuprate oxides, several methods including rolling-assisted bi-axial textured substrates (RABiTS) and inclined substrate deposition (ISD), as well as IBAD, have been attempted. As of 2016, most companies that are trying to commercialize CC adapt IBAD technology except for American Superconductors who use RABiTS predominantly. For the materials in the IBAD process, initial efforts to use yttria-stabilized zirconia (YSZ) or related fluorites in Fujikura in Japan have quickly given way to MgO which technique was developed by Stanford University in the USA. In this review, we present a historical overview of IBAD technology, in particular, for the application of CC. We describe the key scientific understanding of nucleation, the texturing mechanism, and the growth of large bi-axial grains and discuss some potential new IBAD materials and systems for large-scale production.

• 분석과학
• /
• 제19권5호
• /
• pp.400-406
• /
• 2006

탄성되튐검출(Elastic Recoil Detection)법에 의한 박막시료의 수소 정량은 빔전류 측정의 신뢰성을 전제로 유기물 필름을 정량 비교체로 사용하여 이루어진다. 그러나 탄성되튐검출법에서 일반적으로 사용되는 편향각(tilt angle)인 $75^{\circ}$에서는 시편에 조사되는 일차 이온빔의 조사량을 정확하게 측정하기 어렵다. 시편의 편향각을 바꿔가며 탄성산란 신호를 비교하면 편향각이 커질수록 단위 조사량 당 산란신호는 감소하며 또한 시편의 표면 물질에 따라 이온빔전류 적산의 효율이 달라진다. 이러한 빔전류 적산과정의 오류를 제거하여 정량의 신뢰성을 제고하는 방법으로 되튐스펙트럼과 동시에 측정한 산란스펙트럼을 이용하여 빔 조사량을 결정하였다. 산란스펙트럼에 의한 조사량 결정법은 수 10%에 이르는 전류적산과정의 오차요인을 근본적으로 제거하여 되튐반응에 의한 수소정량의 신뢰성을 향상시켰다. 수소정량의 비교체로 사용해 왔던 폴리이미드 필름과 수소이온주입 시료, 그리고 카본웨이퍼를 대상으로 시험분석하고 기존의 전류적산에 의한 직접정량법과 비교하였다.