• Korean Journal of Veterinary Research
• /
• v.11 no.2
• /
• pp.105-116
• /
• 1971

The effects of aconite root in rats and rabbits were studied following oral administration of the powder which was prepared by lyophilization of the decoction of the salted aconite roots. The $LD_{50}$ of the powder, the blood picture, total blood volume, uptake rate of ${42}^K$ and ${24}^Na$ in various organs, oxygen consumption, thyroid activity, and histopathological changes in various organs, were observed. The results obtained were as follows: 1. The $LD_{50}$ of the powder of decoction of the aconite root was 4.07g/kg of body weight in mice which is equivalent to approximately 40g/kg of the salted aconite roots. 2. The number of erythrocytes and leukocytes, hematocrit value, and the amount of hemoglobin in blood were increased in the rats administered daily dosages of 0.1, 0.5, and 1.0g/kg respectively. No significant differences were observed in the differential count of leukocytes. A slight tendency of hemoconcentration was recognized. 3. No changes in the erythrocyte volume, plasma volume and total blood volume were observed in the rats after administration of the powder for one, three, and six days. However, those were decreased in rats treated for ten days. 4. Generally, in various organs of rats the uptake rate of ${24}^Na$ showed a tendency of increasing but that of ${42}^K$ slowed a decreasing tendency. 5. The oxygen consumption was markedly decreased in rats administered the powder. 6. Iodine-131 uptake of thyroid gland was markedly decreased in the rabbits following administration of the powder. 7. In rabbits administered 0.5g/kg for 20 days, fatty changes of hepatic cells, cloudy swelling of the epithelial cells of proximal convoluted tubules of the kidney and the dilation of splenic sinuses were observed, however, milder changes were found in rabbits treated with 0.1g/kg for the same period.

• Journal of Korea Foresty Energy
• /
• v.25 no.2
• /
• pp.55-63
• /
• 2006

Physicochemical properties and copper (II) adsorption ability of two oakwood and two pinewood charcoals, which were manufactured in traditional mode and commercialized in Korea, were examined pHs of these four wood charcoals were between 9.5 and 9.8. In the elemental contents of the wood charcoal, the contents of carbon atom (C) in the four samples were between 85-90%, while the content of hydrogen atom (H) in pinewood charcoal of the company 'S' was 1.62% and this value was three time higher than those of other samples. For iodine adsorption and specific surface area, the pinewood charcoal sample showed higher values than those of the oakwood charcoals. In the copper (II) ion adsorption in aqueous solution, the adsorption rate was increased by the increase of treated amounts of charcoal, treatment time, and pH.

• Journal of Magnetics
• /
• v.19 no.4
• /
• pp.372-377
• /
• 2014

The purpose of the study is to investigate how uptake counts of $^{201}Tl$ of radioisotopes in the human body could change, when taking computed tomography and magnetic resonance imaging right after injecting contrast media. $^{201}Tl$ radioisotope substances of iodine contrast medium, which is a computed tomography contrast medium, and paramagnetic contrast medium, which is an magnetic resonance imaging contrast medium, were used as study materials. First, $^{201}Tl$ was put into 4 cc of normal saline in test tube, and then a computed tomography contrast medium of Iopamidol$^{(R)}$ or Dotarem$^{(R)}$, was put into 2 cc of normal saline in test tube. An magnetic resonance imaging contrast medium of Primovist$^{(R)}$ or Gadovist$^{(R)}$ was also put into 2 cc of normal saline in test tube. Each contrast medium was distributed to make $^{201}Tl$ as 3 mCi, with a total of 4 cc. Gamma camera, low energy high resolution collimator, and pinhole collimator were used to obtain images. The uptake count of $^{201}Tl$ was measured with 1000 frames of images, and obtained after 10 times of repetition. This study revealed that the use of Gadovist$^{(R)}$, which is an magnetic resonance imaging contrast medium, showed the smallest number of uptake count, after measuring $^{201}Tl$ uptake count by low energy high resolution collimator. On the other hand, the use of Iopamidol$^{(R)}$, which is a computed tomography contrast medium, showed the biggest difference in uptake count, when measuring $^{99m}Tc$ uptake count by Pinhole collimator. When examining with gamma camera, using contrast medium and $^{201}Tl$, identifying the changes of uptake count is very important for improving the value of diagnosis.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1099-1109
• /
• 2020

The performance of gadolinium burnable absorber (GdBA) for reactivity control in UO₂ and (U, Th)O₂ fuels and its impact on spent fuel characteristics was performed. Five fuel assemblies: one without GdBA fuel rod and four each containing 16, 24, 34 and 44 GdBA fuel rods in both fuels were investigated. Reactivity swing in all the FAs with GdBA rods in UO₂ fuel was higher than their counterparts with similar GdBA fuel rods in (U, Th)O₂ fuel. The excess reactivity in all FAs with (U, Th)O₂ fuel was higher than UO₂ fuel. At the end of single discharge burn-up (~ 49.64 GWd/tHM), the excess reactivity of (U, Th) O₂ fuel remained positive (16,000 pcm) while UO₂ fuel shows a negative value (-6,000 pcm), which suggest a longer discharge burn-up in (U, Th)O₂ fuel. The concentration of plutonium isotopes and minor actinides were significantly higher in UO₂ fuel than in (U, Th)O₂ fuel except for ²³⁶Np. However, the concentration of non-actinides (gadolinium and iodine isotopes) except for ¹³⁵Xe were respectively smaller in (U, Th)O₂ fuel than in UO₂ fuel but may be two times higher in (U, Th)O₂ fuel due to its potential longer discharge burn-up.

• Applied Chemistry for Engineering
• /
• v.28 no.3
• /
• pp.326-331
• /
• 2017

Castor oil can be used as a useful raw material for chemical industries such as intermediates of surfactants through hydrogenation reaction. In this study, effects of the preparation method and pretreatment condition on the nickel catalyst for the hydrogenation of castor oil were investigated. The nickel catalyst was supported on the silica carrier by the precipitation method with different Ni contents, solution pH values, and precipitants. Repeated pretreatments of oxidation and reduction cycles were then carried out. The activity of the nickel catalyst was measured by comparing the iodine value of the castor oil. The dispersion of nickel on the catalyst was analyzed by X-ray diffraction (XRD), $N_2$ adsorption-desorption, and transmission electron microscopy (TEM). The activity of nickel catalyst was also compared by CO oxidation experiments. The redispersion of nickel occurred on the silica by repeated oxidation and reduction cycles, and this effect contributed to promoting the castor oil hydrogenation activity.

• Journal of Nutrition and Health
• /
• v.8 no.2
• /
• pp.19-26
• /
• 1975

The role of fat is important from nutritional standpoint. The physiological functions of fat are energy yielding as well as the carrier of fat soluble vitamins, with special activities of essential fatty acids. It is fortunate that Korean families prefer to use vegetable oils rather than those from animal origin. But the problems are focused on better qaulity of food oils with attempt to exploit the available resources. This study was undertaken to inevestigate the fatty acid compositions of Korean origin both from conventional and unconventional resources of gas-liquid chromatography. The results obtained are as follows. 1. The total lipid contents of seeds of red pepper, Korean squash, sesame, perilla (var Japonica), and Korean pine nuts and walnuts were 24.3%, 56.6%, 56.4%, 46.9%, 69.8%, and 67.2%, respectively. 2. The saponification numbers of samples ranged from 190 to 200. It showed that the mean molecular weights of fatty acids composing the lipids were very much closed each other. 3. Iodine numbers of varing seed oils ranged from 96.5 of Korean squash seed oil to 124.6 of walnut oil. Oils obtained from squash seeds and sesame seeds showed significantly lower value, while others ranged from 122 to 125. 4. In the fatty acid compositions, squash seed oil was composed mainly of unsaturated fatty acids, 74.9% of which was oleic acid, whereas red pepper seed oil, pine nut oil, and sesame oil contained linoleic acid as a major component showing 64.4%, 56%, 48.8%, and 47.8%, respectively. In perilla seed oil, the amounts of linoleic and linolenic acids were 14.1% and 58%, respectively which meant nearly three-fourths of the total fatty acidsbeing the unsaturated essential fatty acids. This study will encourage the use of these conventional and unconventional vegetable oils which have highr ratios of polyunsaturated to saturated fatty acids.

• Journal of Korean Society on Water Environment
• /
• v.23 no.6
• /
• pp.822-828
• /
• 2007

Perchlorate is an unregulated contaminant but recently many cases of perchlorate contamination have been reported in the US. In Japan, also, a couple of contamination incidents caused by perchlorate occurred. Against this backdrop, investigation on perchlorate was urgent for Korea. Accordingly, perchlorate investigation in tap water and river water was conducted one time a week for seven consecutive weeks at major water sources of Korea including Han River, Guem River, Yeong-san River, and Nak-dong River. Perchlorate was not found at Han River, Guem River, and Yeong-san River. However, all the 4 tap water samples in Nak-dong River recorded high level of perchlorate. Among others, NT1 located at Daegu posted the highest value of $22.3{\mu}g/L$. This level is lower than $24.5{\mu}g/L$, the threshold recommended by US EPA. Still, perchlorate contamination in drinking water can deal a heavy blow to nerve development of infants and children by causing iodine deficiency. At the 1st and 2nd investigations, perchlorate concentration reached $18.7{\sim}95.6{\mu}g/L$ and $4.0{\sim}25.6{\mu}g/L$ respectively, both of which are relatively higher. The high perchlorate concentration in Nak-dong River was possible because of the waste water discharged from LCD manufacturing factory which was located at NS3 in Gumi, Korea. Perchlorate concentration of waste water from the factory was $730{\sim}1,858{\mu}g/L$.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.1
• /
• pp.7-13
• /
• 1998

In order to reconstruct the traditional technology of Korean golden varnish(Hwangchil) made from the exudates of D. morbifera, this study in the second step was carried out to analyze the chemical composition and oil properties of the exudates for coatings and bark extractives made from the trees of D. morbifera more than 20 years old grown in Wando and Jejudo islands in the southwestern part of Korean peninsula according to the physiological seasons. The results obtained are as follows: 1. The exudates appeared to be a phytoalexin because it exudated after several days in tapping only in summer season. 2. Both the exudates and bark-extracts with acetone contained 50~60% unsaponifiables and 30~50% saponifiables 3. A major component of essential oil in bark-extractives was ${\beta}$-cubebene and reached to 60~80%, while that of exudates included only 34% ${\beta}$-cubebene and some other compounds such as ${\beta}$-cadinene of 12%, aromadendrene of 9%, ${\beta}$-selinene of 9%, CAS030021-74-0 of 10%, etc. in GC-MS spectrometer. 4. A mjor component of fatty oil fraction in bark-extractives was linoleic acid and reached to more than 60%, while the exudates had mostly other components such as terpenes and phenolics instead of fatty acids accordint to GC-MS spectrometer. 5. Iodine value of samples after oil refining had 214mg/g in the exudates and more than than 150mg/g in bark-extractives, so the latter belonged to a drying oil.. 6. Therefore, the exudates from D. morbifera for traditional Korean golden varnish seems to have beeen used to a good varnish because it has some specific compounds different from its bark-extractives or general varnishes.

• Korean Journal of Food Science and Technology
• /
• v.36 no.6
• /
• pp.885-892
• /
• 2004

Peroxide values (PV) of fat from fallow up formula were determined using redox-potentiometric titration method and standard method, which is based on KI oxidation by hydroperoxides and volumetric titration of liberated iodine, and their uncertainties were compared. Uncertainty sources in measurement, such as sample weight, sodium thiosulfate concentration, and titer, were identified and used as parameters for combined standard uncertainty based on Guide to the expression of uncertainty in measurement and Draft EURACHEM/CITAC Guide. Analytical results and combined standard uncertainties of peroxide values (PV) determined by standard burette and potentiometric titrations were $2.05{\pm}0.17\;and\;1.96{\pm}0.07\;meq/kg$, respectively, suggesting potentiometric titration method is suitable for determining PV of fat with low PV, because uncertainty of PV determination obtained by potentiometric titration was lower than that obtained by burette titration.

• Fire Science and Engineering
• /
• v.14 no.1
• /
• pp.8-12
• /
• 2000

We had investigated thermal and ignition behaviors of textiles. Decomposition of textiles with temperature was investigated using a DSC and the weight loss according to temperature using a TGA in order to find the thermal hazard of textiles, and the ignition behaviors of textiles according to species and permeation amount of oil. In addition, ignition behaviors of those permeated into oils indicating different iodine value and of those with arid without air in reaction vessel of measuring equipment were studied with constant temperature method among ignition temperature measuring methods. As results, the range of decomposition temperature of synthetic fiber was slightly broad compared with that of natural fiber, pure cotton. Besides, the initiation temperature of heat generation of both samples riced in the case of no air injection in the reaction vessel. On the other hand, in the case of air injection that was lowered according to the increase in permeative amount of oils and fats and decreased quickly as sample was permeated into drying oil.