• Nuclear Engineering and Technology
• /
• v.10 no.1
• /
• pp.1-12
• /
• 1978

Concanavalin-A, lectin extracted from Korean native plant “Banha”(Pine-llia Termata) and their conjugation products with tyrosine and 5-iodo-6-aminouracil were labelled by radioactive iodiae-125, and these labelled compounds were subjected to a hemagglutination test in vitro. The labelling procedures were presented with respect to labelling yield and the trends on the conjugation reaction of lectin with various amino acids were discussed. The preliminary results on the hemagglutination tests against cancer tissues were presented and the potential clinical applications of these labelled compounds were discussed.

• Journal of Aquaculture
• /
• v.21 no.1
• /
• pp.7-12
• /
• 2008

Toxicity of ten commercial disinfectants(hydrogen peroxide, sodium hypochlorite, chlorine dioxide, povidon iodine, formaldehyde, glutaraldehyde, quaternary ammonium compounds(QAC), didecyl dimethyl ammonium chloride(DDAC), ortho-dichlorobenzene, and copper sulfate) was measured by chinook salmon embryo-214 cell line and three fish species: flounder Paralichthys olivaceus, black rockfish Sebastes pachycephalus, and black sea bream Acanthopagrus schlegelii. The $LC_{50}$ levels of 24 hours acute toxicity with the ten disinfectants were tested in three species of fish. Effectiveness of ten chemical disinfectants were varied by each chemical as well as by species. Hydrogen peroxide showed the higest activity at 201, 269, and 139 ppm in the flounder, the black rockfish, and black sea bream, respectively. DDAC showed the lowest activity at 2.1, 1.0, and 1.5 ppm in the flounder, the black rockfish, and black sea bream, respectively. The highest variation was observed in copper sulfate by both the chemicals and the species.

• Korean Chemical Engineering Research
• /
• v.52 no.6
• /
• pp.768-774
• /
• 2014

SI process is a thermochemical process producing hydrogen by decomposing water while recycling sulfur and iodine. Various technologies have been developed to improve the efficiency on Section III of SI process, where iodine is separated and recycled. EED(electro-electrodialysis) could increase the efficiency of Section III without additional chemical compounds but a substantial amount of $I_2$ from a process stream is loaded on EED. In order to reduce the load, a crystallization technology prior to EED is considered as an $I_2$ removal process. In this work, $I_2$ particle sinking behavior was modeled to secure basic data for designing an $I_2$ crystallizer applied to $I_2$-saturated $HI_x$ solutions. The composition of $HI_x$ solution was determined by thermodynamic UVa model and correlation equations and pure properties were used to evaluate the solution properties. A multiphysics computational tool was utilized to calculate particle sinking velocity changes with respect to $I_2$ particle radius and temperature. The terminal velocity of an $I_2$ particle was estimated around 0.5 m/s under considered radius (1.0 to 2.5 mm) and temperature (10 to $50^{\circ}C$) ranges and it was analyzed that the velocity is more dependent on the solution density than the solution viscosity.

• The Korean Journal of Nuclear Medicine
• /
• v.36 no.4
• /
• pp.209-223
• /
• 2002

By considering the biological properties of a tumor, it should be possible to realize better results in cancer therapy. PET imaging offers the opportunity to measure tumor growth non-invasively and repeatedly as an early assessment of response to cancer therapy. Measuring cellular growth instead of energy metabolism showed offer significant advantages in evaluating therapy. Thymidine and its derivative nucleoside compounds can be changed to mono, di- and tri- phosphate compounds by thymidine kinase and then be incorporated into DNA. Their bindings are increased in highly proliferating cells due to the high DNA synthesis rate. To evaluate cell proliferation, many kinds of thymidine and uridine derivatives have been labeled with positron emitter and radioactive iodine. Compared to radiopharmaceuticals which have radioisotope labeled base ring such as pyirmidine, the radiopharmacuticals which have radioisotope labeled sugar ring are more stable in vivo and have metabolic resistance. The biological properties such as DNA incorporation ratios are highly dependent on their chemical structures and metabolic processes. This overview describes synthesis of radiopharmaceuticals and their biological properties for imaging of tumor cell proliferation.

• The Korean Journal of Nuclear Medicine
• /
• v.12 no.1
• /
• pp.37-40
• /
• 1978

Labelling auflatoxines, the potential carcinogenic compounds, by radioactive iodine has been studied. The auflatoxine-$B_1$, which is known to be the most abundant components of auflatoxines in the nature, was labelled by radioactive iodine-125 through an acid catalyst chloroamine-T procedure. The radiochemical yield was amounted to 63.6%. The chemical structure of the labelled product was proved to be 6-iodo 5-methoxy coumarine structure of auflatoxine-$B_1$ molecule by means of I.R. and N.M.R. spectroscopy. The labelled product was orally administered in a test animal (Rat) and examined the accumnulation of radioactivity in the body at the definite time interval. The accumnulation of the radioactivity was pronounced at the blood and the liver. There was no indication of the decomposition of auflatoxine-$B_1-^{125}I$ in the organs of the test animal.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.4
• /
• pp.359-363
• /
• 2004

Reaction conditions and catalysts were investigated for direct $CF_3I$ synthesis. Optimum reaction temperature was determined by pyrolysis of $CF_3H$ and catalytic reactions. Reactions with changing oxygen concentration were performed. As a result, yield of $CF_3I$ increased with decreasing oxygen concentration. Catalytic activity was changed with the weight ratio of the used metal salts. This result was stemmed from the change in the pore size of activated carbon by the metal salts. The optimum reaction conditions were: $600^{\circ}C$, space velocity of $45hr^{-1}$, and with 7wt% KF/AC catalyst.

• Nuclear Engineering and Technology
• /
• v.53 no.5
• /
• pp.1717-1722
• /
• 2021

This study is devoted to the ability of carbon fiber material samples impregnated with various amounts of barium iodide and triethylenediamine to remove radioactive methyliodide from air streams. The main sorption characteristics of impregnated UVIS® carbon fiber were determined and the use of this material for purifying of technological gas flows at nuclear power plants was evaluated. The methyliodide trapping efficiency by samples impregnated with barium iodide, TEDA, and their mixture was 83.4 ± 0.8%; 93.1 ± 0.6% and 93.5 ± 0.7% respectively, under the same conditions. The study established a significantly higher capacity (8.3 ± 0.07 mg/cm²) of samples impregnated simultaneously with both chemical compounds toward methyliodide. Under the same test conditions, the values of this parameter for the samples impregnated separately with TEDA and BaI₂ were 2.85 ± 0.05 mg/cm² and 0.86 ± 0.04 mg/cm², respectively.

• Nuclear Engineering and Technology
• /
• v.50 no.8
• /
• pp.1355-1363
• /
• 2018

Many radionuclides exist in normal environment and artificial radionuclides also can be detected. The radionuclides ($^{131}I$) are widely used for labeling compounds and radiation therapy. In Korea, the radionuclide ($^{131}I$) is produced at the Radioisotope Production Facility (RIPF) at the Korea Atomic Energy Research Institute in Daejeon. The residents around the RIPF assume that $^{131}I$ detected in environmental samples is produced from RIPF. To ensure the safety of the residents, the radioactive concentration of $^{131}I$ near the RIPF was investigated by monitoring environmental samples along the Gap River. The selected geographical places are near the nuclear installation, another possible location for $^{131}I$ detection, and downstream of the Gap River. The first selected places are the "front gate of KAERI", and the "Donghwa bridge". The second selected place is the sewage treatment plant. Therefore, the Wonchon bridge is selected for the upstream of the plant and the sewage treatment plant is selected for the downstream of the plant. The last selected places are the downstream where the two paths converged, which is Yongshin bridge (in front of the cogeneration plant). In these places, environmental samples, including sediment, fish, surface water, and aquatic plants, were collected. In this study, the radioactive iodine ($^{131}I$) detection along the Gap River will be investigated.

• Korean Chemical Engineering Research
• /
• v.58 no.2
• /
• pp.235-247
• /
• 2020

Simulation study and validation on 50 L/hr pilot-scale Bunsen process was carried out in order to investigate thermodynamics parameters, suitable reactor type, separator configuration, and the optimal conditions of reactors and separation. Sulfur-Iodine is thermochemical process using iodine and sulfur compounds for producing hydrogen from decomposition of water as net reaction. Understanding in phase separation and reaction of Bunsen Process is crucial since Bunsen Process acts as an intermediate process among three reactions. Electrolyte Non-Random Two-Liquid model is implemented in simulation as thermodynamic model. The simulation results are validated with the thermodynamic parameters and the 50 L/hr pilot-scale experimental data. The SO₂ conversions of PFR and CSTR were compared as varying the temperature and reactor volume in order to investigate suitable type of reactor. Impurities in H₂SO₄ phase and HI_X phase were investigated for 3-phase separator (vapor-liquid-liquid) and two 2-phase separators (vapor-liquid & liquid-liquid) in order to select separation configuration with better performance. The process optimization on reactor and phase separator is carried out to find the operating conditions and feed conditions that can reach the maximum SO₂ conversion and the minimum H₂SO₄ impurities in HI_X phase. For reactor optimization, the maximum 98% SO₂ conversion was obtained with fixed iodine and water inlet flow rate when the diameter and length of PFR reactor are 0.20 m and 7.6m. Inlet water and iodine flow rate is reduced by 17% and 22% to reach the maximum 10% SO₂ conversion with fixed temperature and PFR size (diameter: 3/8", length:3 m). When temperature (121℃) and PFR size (diameter: 0.2, length:7.6 m) are applied to the feed composition optimization, inlet water and iodine flow rate is reduced by 17% and 22% to reach the maximum 10% SO₂ conversion.

• Journal of the East Asian Society of Dietary Life
• /
• v.21 no.5
• /
• pp.723-730
• /
• 2011

Soybean oil used to fry French fries, chicken nuggets, and donuts was exposed to high temperature at $180^{\circ}C$ for 72 h. The effects of frying foods on the thermooxidative stability of soybean oil were evaluated by determining the contents of free fatty acids, peroxides, total polar compounds, and conjugated dienoic acids, and by analyzing dielectric constant, refractive index, iodine value, smoke point, and fatty acid composition. The contents of free fatty acids, total polar compounds, conjugated dienoic acids, dielectric constant, and refractive index increased, whereas iodine value, smoke point, and U/S ratio of fatty acids composition decreased with frying time. All samples of frying oils after 72 h presented free fatty acid contents of below 2.0% and total polar compounds of below 25%, which were within the legal limits. However, peroxide values of frying oils were not directly correlated with frying time. The type of fried food affected the thermooxidative stability of the frying oils, with chicken nuggets being more stable in thermooxidation than French fries and donust. Among physiochemical indicators of frying oil quality, a rapid method including dielectric constant and refractive index can be used in quantity food production.