• Journal of Environmental Science International
• /
• v.24 no.11
• /
• pp.1463-1471
• /
• 2015

The surface modified activated carbons (SMACs) were prepared with various $P_2O_5$ concentrations using two activated carbons (ACs: waste citrus peel-based activated carbon and coconut-based activated carbon). The characteristics and adsorptivity of bisphenol A (one of phenolic endocrine disrupting chemicals) were compared between ACs and SMACs. The contents of C, H and N of SMACs were similar to those of ACs, but the content of $P_2O_5$ for the former increased greatly than for the latter, due to the impregnation of $P_2O_5$ into the pores. The specific surface area, total pore volume, average pore diameter and iodine adsorptivity for the former decreased due to the impregnation of $P_2O_5$ into the pores, compared to those for the latter. The adsorptivity of bisphenol A for the former were higher than that for the latter, although specific surface area, total pore volume, average pore diameter and iodine adsorptivity for the former were lower than those for the latter.

• Applied Chemistry for Engineering
• /
• v.28 no.6
• /
• pp.649-654
• /
• 2017

An activated carbon was prepared from waste citrus peel produced in large amounts in Jeju Island, Korea, using KOH activation and its characteristics was examined. Under the condition of the KOH ratio between 100 and 300%, activation temperature from 400 to $900^{\circ}C$ and activation time from 0.5 to 1.5 h, the iodine adsorptivity of the activated carbon prepared increased but the yield decreased with respect to the increase of each conditions. The iodine adsorptivity and yield of the activated carbon prepared at the activation time of more than 1.5 h were similar to those of using 1.5 h. In addition, as the KOH ratio increased, the specific surface area and pore volume of the activated carbon increased, but the pore diameter decreased. The activated carbon has an average pore diameter of $20{\sim}25{\AA}$. Also, the activated carbon prepared at 300% KOH and $900^{\circ}C$ for 1.5 h has the highest specific surface area of $1,527m^2/g$ and iodine adsorptivity of 1,246 mg/g.

• Journal of Environmental Science International
• /
• v.16 no.9
• /
• pp.1091-1098
• /
• 2007

Activated carbon was prepared from waste citrus peels by chemical activation with $ZnCl_2$. The optimal condition of carbonization was at $300^{\circ}C$ for 1.5 hr. Activation experiments with carbonized samples prepared at optimal carboniztion condition were carried out under various conditions such as activation temperature of 400 to $900^{\circ}C$, activation time of 0.5 to 2.0 hr, and $ZnCl_2$ ratio of 100 to 300%. In order to investigate the physical properties of the activated carbons prepared, iodine adsorptivities and specific surface areas were measured and their morphologies were observed from scanning electron microscopy. As $ZnCl_2$ ratio increased, activation yield decreased, while iodine adsorptivity and specific surface area increased. The optimal condition of activation was at 300% $ZnCl_2$ ratio and $300^{\circ}C$ for 1.5 hr, and then iodine adsorptivity and specific surface area was measured as about 862 mg/g and $756m^2/g$, respectively. SEM photography showed that the surface morphology was changed and many active pore were produced by chemical activation.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.515-520
• /
• 2007

Recently, the treat of sludge is usually progressed by ocean disposal. But it will be totally banned by content of its heavy metal according to London Dumping Convention, gradually. The stable way of treat of sewage sludge should be examined urgently. To solve the problem, recently, there are efficient and environment-oriented method. One of them is to produce absorbent through the activation. This study produces absorbent through steam activation. As basic experiment, optimum activation condition for preparation of good absorbent is researched through study of the fellowing variables : steam flow rate, activated temperature, activation time. As the result of this with standard on iodine adsorptivity, it is chosen, that steam flow rate "30 mL/hr", activation temperature $"500^{\circ}C"$, activation time "60 minutes". At the time, iodine adsorptivity and yield shown that 228.4 mg/g, 77.23%. And also, by using nitrogen adsorption, SEM and EDS are confirmed that pore development, specific surface area, mean pore size, chemical component and content. Pore developed by steam activation is also confirmed that it is micropore.

• Journal of Environmental Science International
• /
• v.16 no.11
• /
• pp.1279-1285
• /
• 2007

The activated carbon was prepared from waste citrus peels using NaOH. With the increase of NaOH ratio, iodine adsorptivity and specific surface area of the activated carbon prepared were increased, but activation yield was decreased. The optimal condition of activation was at 300% NaOH and $700^{\circ}C$ for 1.5 hr. For the activated carbon produced under optimal condition, iodine adsorptivity was 1,006 mg/g, specific surface area was $1,356 m^2/g$, and average pore diameter was $20{\sim}25{\AA}$. From the adsorption experiment for benzene vapor in fixed bed reactor, it was found that the adsorption capacity of activated carbon prepared from waste citrus peel was higher than that of activated carbon purchased from Calgon company. This result implied that the activated carbon prepared from waste citrus peel could be used for gas phase adsorption.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.718-722
• /
• 2012

$H_2S$ adsorption characteristics of adsorbent made by sewage sludge were investigated. For analyses of the manufactured adsorbent, various methods such as Iodine adsorptivity, scanning electron microscope (SEM), and measurements of BET surface area and pore volume were adopted. As the major adsorption characteristic, breakthrough curve was measured by using a continuous fixed bed adsorption column for operating variables such as adsorption temperature ($25{\sim}45^{\circ}C$), aspect ratio (L/D)(3~9), gas flow rate (0.1~2.0 liter/min) and $H_2S$ gas concentration (50~200 ppm). The experimental result showed that the carbonization and activation of sewage sludge are very important for the improvement in $H_2S$ adsorption capacity.

• International Journal of Advanced Culture Technology
• /
• v.6 no.2
• /
• pp.129-136
• /
• 2018

Our present study, we impregnated Al-Fe-Mg-Si (NFM) nanocomposites having various concentrations 0, 1000, 3000, and 5000 mg/L in biomass in order to make carbonized biomass. We characterized the properties of the impregnated samples through thermogravimetric/differential thermal analysis (TG-DTA), pore distribution, scanning electron microscopy (SEM). The best results were observed for a NFM nanocomposites concentration of 5000 mg/L. After the first heat treatment, carbonization, and activation processes, the fixed carbon ratio and iodine adsorptivity were increased by 21.89% and 368 mg/g, 23.98% and 475 mg/g, 26.40% and 238 mg/g, respectively. The remove rate of malodorous and VOCs were that the sample shows good removal capabilities. From above results, our sample could be used for the removal of noxious and malodorous gases and for the purification of wastewater.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.551-555
• /
• 2012

Desorption reaction characteristics of the commercial activated carbons which were used for the removal of industrial odorants were investigated. BET specific surface area was analyzed to investigate the chemicophysical property of activated carbon. Adsorptivity of activated carbon was estimated by iodine number. Thermogravimetric analyzer (TGA) was used to investigate the desorption characteristics. Activation energies and reaction orders for reaction characteristics according to adsorption and desorption of activated carbons were estimated by employing the Friedman method and Freeman-Carroll method. Adsorptivity of reprocessed activated carbons were significantly lower than that of fresh activated carbons. In this study, it was found that the activation energies were 15.9~23.4 kJ/mol in Friedman method and 22.7~33.8 kJ/mol in Freeman-Carroll method.

• Applied Chemistry for Engineering
• /
• v.20 no.1
• /
• pp.109-115
• /
• 2009

The purposes of this study are to treat sewage sludge that has increasingly become an issue and to recycle it as the adsorbent. The adsorbent was produced by carbonization and simultaneous steam activation, and its characteristics were studied. Parametric screening studies were carried out for the preparation of good adsorbent. Optimum operating conditions were confirmed as input carbonization-activated temperature of $840^{\circ}C$, feed steam flow rate of 70 g/min, carbonization-activated time of 30 min and feed dried sludge of 10.8 kg/day, respectively. At this time, the iodine adsorptivity was maximized as 328.1 mg/g. Pore development, structure, element compound and content were confirmed by using nanoPOROSITY, SEM (Scanning electron microscope), and EDS (Energy dispersive spectroscopy). Through this result, it was known that the adsorbent derived from sewage sludge could be used for the treatment of leachate in a landfill, VOCs (Volatile organic compounds), and so on.

• Clean Technology
• /
• v.29 no.4
• /
• pp.272-278
• /
• 2023

There is a lot of interest in methods for pollutants using adsorption, and recent research is being conducted to show that biochar can be used to remove organic and inorganic pollutants. In particular, wood waste as waste biomass requires a biomass recycling method, and a method to increase the adsorption capacity of biochar produced using wood waste is needed. Biochar is created by Hydrothermal carbonization (HTC) using, which uses low temperature and high pressure, has low energy consumption and does not require moisture removal pretreatment, and biochar is created through chemical activation using KOH, NaOH, and ZnCl₂ chemicals. The adsorption characteristics of biochar were determined by analyzing iodine adsorptivity, specific surface area, pore diameter, pore volume, pore distribution, and SEM according to the activation. The results of analyzing the selecting biochar by activating the biochar produced at HTC 300℃, 4 hr by KOH, NaOH, and ZnCl₂ chemicals, the specific surface area was 774~1.387 m²/g, showing a high specific surface area similar to activated carbon, and it was confirmed that micropores with an average pore diameter in the range of 21~24 Å were formed. As a result of SEM observation, the surface was uniform with a certain shape depending on activation. It was confirmed that one pore was developed and the number of pores increased.