• 보존과학연구
• /
• 통권17호
• /
• pp.20-38
• /
• 1996

Horse armour from Dohang-ri site had been retained its original form and all iron metal fragments of armour were very completely corroded without remaining metal core. Horse armour excavated is archaeologically very important, Also it should be maintained the original form. So, only moderate treatments such as brushing and consolidation techniques were performed. The processes for the conservation is as follows : 1) preliminary investigation, 2)removal of chlorides and corrosion products, 3) consolidation with 40% ParaloidNAD-10, 4) joining and restoration

• Journal of Pharmaceutical Investigation
• /
• 제30권3호
• /
• pp.201-205
• /
• 2000

Three new polymorphic modifications were prepared by recrystallization under various conditions and characterized by DSC and X-ray crystallography. In pH 4.0 buffer at $37{\pm}0.5^{\circ}C$, the polymorphic modifications showed significant differences in the dissolution rate. The dissolution rate of Mod. 4, amorphous form, was faster than that of marketed cefaclor (Mod. 1). When all modifications were stored at 52% RH, 95% RH and in silica gel desiccator, any polymorphic transformation was not observed.

• Journal of Pharmaceutical Investigation
• /
• 제37권1호
• /
• pp.23-26
• /
• 2007

Two crystal forms of cefuroxime axetil were obtained by the recrystallization from different organic solvents and characterized by differential scanning calorimetry (DSC), X-ray powder diffraction (XRD). It was confirmed that two crystal forms are identical. The dissolution patterns of these two forms were also checked in 0.07 N HCl at $37{\pm}0.5^{\circ}C$, 100 rpm for 180 minutes. The transformation during storage was also studied.

• 약학회지
• /
• 제25권4호
• /
• pp.167-173
• /
• 1981

Spectroscopic investigation has been carried out to know the binding mechanism of riboflavin with barbiturates, such as phenobarbital and amobarbital in chloroform solution by using infrared and nuclear magnetic resonance spectra. Phenobarbital and isoalloxazine form a 1:1 cyclic hydrogen bonded dimer through the 3-N imino and the 2-C carbonyl groups of the isoalloxazine ring of the latter, and the 1-N (or 3-N) imino and the 2-C carbonyl groups of the pyrimidine ring of the former. Amobarbital and riboflavin form a 1:1 cyclic hydrogen bonded dimer by the same mode of phenobarbital.

• Journal of Pharmaceutical Investigation
• /
• 제20권2호
• /
• pp.65-71
• /
• 1990

Some studies reported physicochemical factors of drugs affecting solubility and dissolution rate. However, few have been reported about pharmaceutical application of crystal forms (habits). Therefore, using acetylsalicylic acid and phenacetin as model substances, we monitored the effects of crystal forms on the dissolution rates.

• Journal of Electrical Engineering and information Science
• /
• 제1권2호
• /
• pp.52-57
• /
• 1996

Detection of arcing high impedance faults has been a perplexing in the power distribution protection. Transient analysis of distribution disturbances for fault discrimination from other normal events is important for a secure protection of the power system. A simple parameter of wave form distortion quantification is used to analyze the behaviors of arcing faults and normal distribution disturbances. Theoretical perspectives of the transients were studied and actual disturbances were examined. From this investigation, a discrimination guideline based on the revised crest factor is developed. The discrimination method has a high potential to enhance the reliability and security for the distribution system protection.

• Journal of Pharmaceutical Investigation
• /
• 제41권6호
• /
• pp.371-376
• /
• 2011

The objective of this work was to investigate the existence of new crystal forms of tulobuterol which is used to prevent morning asthma attacks by ${\beta}_2$ agonist and the transformation of crystal forms. Three crystal forms of tulobuterol have been isolated by recrystallization and Form 2 was transformed to Form 4 at 52% RH and 95% RH and these four crystal forms are characterized by differential scanning calorimetry (DSC), powder X-ray diffractometry (PXRD) and thermogravimetric analysis (TG). The DSC and PXRD patterns of four crystal forms of tulobuterol were different respectively. The dissolution patterns of these three crystal forms of tulobuterol were studied and they showed significant differences in the dissolution rate. After storage of 2 months at 0% RH (silica gel, $20^{\circ}C$), 52% RH (saturated solution of $Na_2Cr_2O_7{\cdot}2H_2O/20^{\circ}C$) and 95% RH (saturated solution of $Na_2HPO_4/20^{\circ}C$), Form 1 and Form 3 were not transformed. But Form 2 was transformed to Form 4 at 52% RH and 95% RH.

• Human Ecology Research
• /
• 제58권2호
• /
• pp.215-228
• /
• 2020

Underlying dress forms for high coverage patterns are very important in the dress industry. Size 9 from brand D was chosen according to the analysis that it was the best option because a dress should have a large allowable range in one size. The criteria for selection were the dress form with a waist circumference of 63.50 centimeters, which is close to the standard size of women in Korea. Brassieres for dresses were included to enhance the aesthetic value of the correction process in producing a basic dress pattern. An experimental torso pattern was applied to evaluate the fit and suitability of the dress form that was also later verified in the process of the dress works. Three dresses were produced and presented on the chosen study dress form. The research procedures are as follows. First, the sell-through rates and feedbacks were collected from the dress form vendor. Second, a literature survey on dresses and a dress company investigation were conducted. Third, the amount of body dimension changes due to the use of a bra in the dresses were examined. Fourth, after the correction of the dress form, the torso pattern was made by draping. Fifth, the torso experimental clothing made of muslin material was evaluated. Sixth, the dress works of the top design were presented using the size 9 basic pattern developed by brand D.

• 대한가정학회지
• /
• 제28권4호
• /
• pp.87-101
• /
• 1990

This study was undertaken to test to fit forms of the Engel curves to data. The comparisons were confined to the linear, semi-logarithmic and double-logarithmic forms. Data from the 1970-1987 Urban Household Economy Survey were used to estimate the Engel curves. The twelve categories of consumption expenditure were considered for investigation. Parameters of the Engel curves were derived from OLS and TSLS. In this paper the size of the family was used as the deflater. The results could be summarized as follows: 1. Comparing with the R2 of three foms, it could be concluded that, the linear form generally gave a better fit to data than the other forms did. Only for housing and clothing and foot wear, did the semi-logarithmic form give a better fit. Only for meals outside the home, fuel, light and water charges, and miscellaneous, did the double-logarithmic form give a better fit. 2. Comping with the income elasticities based on the alternative forms, it could be concluded that the differences between the estimates were since each form made different assumption as to the way in which elasticity varied. In general, the semi-logarithmic form gave the highest estimate and double-logarithmic form did the lowest estimate. The difference between semi-logarithmic and the other forms were greater than the those of linear and double-logarithmic form. 3. It was found that the income elasticity varied with the difinition of income used as an explanatory variable in Engel curves.

• 소성∙가공
• /
• 제18권1호
• /
• pp.39-44
• /
• 2009

This paper is concerned with forming technology of an automotive front side member part with ultra high strength steel sheet of DP980. The forming technology considered in this paper is the draw & form type, which installs the upper pad and lower pad to produce the complicated shape of ultra high strength steel sheet. In order to produce sound product, comparison between form type and draw & form type and between draw type and draw & form type are investigated by FE-analysis. FE-analysis is carried out with commercial sheet metal forming analysis S/W, DYNAFORM. It was shown from FE-analysis that the draw & form type satisfied the required specifications such as the dimensional accuracy and soundness of automotive front side member part. The effectiveness of the analytical result was verified by the experiment. From this investigation, the draw & form type is proved to be able to supply useful forming technology in forming ultra high strength steel.