• Journal of Mechanical Science and Technology
• /
• 제19권8호
• /
• pp.1611-1620
• /
• 2005

This paper shows the use of wavelet transformation combined with inverse acoustics to reconstruct the surface velocity of a noise source. This approach uses the boundary element analysis based on the measured sound pressure at a set of field points, the Helmholtz integral equations and wavelet transformation for reconstructing the normal surface velocity field. The reconstructed field can be diverged due to the small measurement errors in the case of nearfield acoustic holography (NAH) using an inverse boundary element method. In order to avoid this instability in the inverse problem, the reconstruction process should include some form of regularization for enhancing the resolution of source images. The usual method of regularization has been the truncation of wave vectors associated with small singular values, although the order of an optimal truncation is difficult to determine. In this paper, a wavelet transformation is applied to reduce the computation time for inverse acoustics and to enhance the reconstructed vibration field. The computational speed-up is achieved, with solution time being reduced to $14.5\%$.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1994년도 춘계학술대회
• /
• pp.127-130
• /
• 1994

This study is focused on investigating the mechanical properties of the human cornea and its shape through the inverse nonlinear finite element approach using the clinical and experimental data. The results of the inverse approach were used to construct the finite element model of the photorefractive excimer laser surgery for the myopia patients. The results of the finite element model were compared with those of the current clinical experiences and showed good agreements. Finally this study came to the conclusion that the finite element method has potential of the application to the medicine.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.3-10
• /
• 2002

This study proposed a technique for inverse problem, linear approximation of contact position and loading in single and double meshing of spur gear, using 2-dimension model considered near the tooth by root stress. Determine root stress is carried out for the gear tooth by finite element method and boundary element method. Boundary element discretization near contact point is carefully performed to keep high computational accuracy. And from those estimated results, the comparing estimate value with boundary element method value was discussed.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권2호
• /
• pp.203-211
• /
• 2012

This paper proposes a $16{\times}16$ and $32{\times}32$ inverse transform architecture for HEVC (High Efficiency Video Coding). HEVC large transform of $16{\times}16$ and $32{\times}32$ suffers from huge computational complexity. To resolve this problem, we proposed a new large inverse transform architecture based on hardware reuse. The processing element is optimized by exploiting fully recursive and regular butterfly structure. To achieve low area, the processing element is implemented by shifters and adders without multiplier. Implementation of the proposed 2-D inverse transform architecture in 0.18 ${\mu}m$ technology shows about 300 MHz frequency and 287 Kgates area, which can process 4K ($3840{\times}2160$)@ 30 fps image.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.597-602
• /
• 2008

Most of structural analyses are concerned with the deformation and stress in a body subjected to external loads. In many fields, however, the interpretation of inverse problems is needed to determine surface tractions or internal stresses. In this study, the inverse processes by using the finite elements and the boundary elements are formulated for the evaluation of internal residual stresses from displacements measured on a remote surface. Small errors in the measured displacements often result in a substantial loss of accuracy of an inverse system. We use the Tikhonov regularization techniques to regularize the ill-conditioned system. Advantages and disadvantages are discussed through numerical examples.

• 대한기계학회논문집A
• /
• 제20권12호
• /
• pp.3856-3870
• /
• 1996

The objective of this study is to evaluate heat transfer coefficient distribution during heat treatment by inverse analysis. As a first procedure, the inverse heat transfer formulation by using two dimensional finite element method has been developed. The formulation can handlematerial nonlinearity and allow arbitrary placement and number of sensors. The formulation was verified through application to simulated exact and inexact measurements.

• 한국통신학회논문지
• /
• 제32권4C호
• /
• pp.440-446
• /
• 2007

본 논문은 엘레멘트 인버스 처리에 근거한 재킷 변환을 통한 DFT 행렬의 새로운 표현을 다룬다. DFT 행렬의 역을 단지 재킷 변환의 소행렬 분해에 따라 표현하며 이러한 결과는 DFT 행렬의 역이 단지 이의 희소 행렬과 치환 행렬에만 관련됨을 보여준다. 재킷 행렬을 통한 DFT 행렬의 분해는 블록 변조 특성을 나타내는 강한 기하 구조를 갖는다. 이는 재킷 행렬을 통해 분해된 DFT 행렬은 블록 변조 과정으로 해석할 수 있음을 의미한다.

• 소성∙가공
• /
• 제15권6호
• /
• pp.445-452
• /
• 2006

In most of automobile body panel manufacturing, trimming process is generally performed before flanging. To find feasible trimming line is crucial in obtaining accurate edge profile after flanging. Section-based method develops blank along manually chosen section planes and find trimming line by generating loop of end points. This method suffers from inaccurate results of edge profile. On the other hand, simulation-based method can produce more accurate trimming line by iterative strategy. In this study, new fast simulation-based method to find feasible trimming line is proposed. Finite element inverse method is used to analyze the flanging process because final shape after flanging can be explicitly defined and most of strain paths are simple in flanging. In utilizing finite element inverse method, the main obstacle is the initial guess generation for general mesh. Robust initial guess generation method is developed to handle genera] mesh with very different size and undercut. The new method develops final triangular mesh incrementally onto the drawing tool surface. Also in order to remedy mesh distortion during development, energy minimization technique is utilized. Trimming line is extracted from the outer boundary after finite element inverse method simulation. This method has many advantages since trimming line can be obtained in the early design stage. The developed method is verified by shrink/stretch flange forming and successfully applied to the complex industrial applications such as door outer flanging process.

• 대한토목학회논문집
• /
• 제39권1호
• /
• pp.147-154
• /
• 2019

유한요소모델 업데이팅은 계측에 의한 구조물의 실제 응답과 가장 가까운 응답을 내는 유한요소모델의 매개변수를 찾는 문제로 정의할 수 있다. 기존 연구에서는 실 구조물과 해석 모델의 응답의 오차를 최소화하는 최적화에 기반 한 방법이 개발되었다. 이 연구에서는 목표 모드 정보로부터 유한요소 모델의 매개변수를 직접 얻을 수 있는 역 고유치 문제를 구성하고 역 고유치 문제를 빠르고 정확하게 풀기 위한 깊은 신경망(Deep Neural Network)을 구성하는 방법을 제안한다. 개발한 방법의 적용 예로서 현수교의 역 고유치 함수를 모사하는 신경망을 이용한 동적 유한요소모델 업데이트를 보인다. 해석 결과 제시한 방법은 매우 높은 정확도로 목표 모드에 대응하는 매개변수를 찾아낼 수 있음을 보였다.

• 한국통신학회논문지
• /
• 제32권6C호
• /
• pp.594-599
• /
• 2007

본 논문에서는 하이브리드 구조에 의한 DCT/DFT 행렬의 새로운 표현을 제시한다. 엘레멘트 인버스 소행렬 분해 알고리즘에 근거하여 DCT와 DFT가 동일한 반복 연산 패턴을 갖고 있음을 보이며, 몇몇 대각행렬을 이용한 하이브리드 구조를 개발한다.