• 제목/요약/키워드: inverse coefficient

검색결과 317건 처리시간 0.027초

충돌 후 속도와 충돌 변형으로부터 자동차 충돌 재구성 (Automobile Collision Reconstruction Using Post-Impact Velocities and Crush Profile)

  • 한인환
    • 대한교통학회지
    • /
    • 제18권4호
    • /
    • pp.107-115
    • /
    • 2000
  • 본 논문에서는 자동차 충돌사고 재구성에 직접 적용이 가능하도록, 주어지는 두 차량의 충돌후 속도, 차량에 관한 간단한 물성치와 기하학적 상대 위치들에 근거하여 충돌 직전 속도 성분들을 계산하는 소위 충돌 거동에 대한 역해석 방법을 제시한다. 또한, 제시하는 역해석 방법이 실용적 의미를 가지게 하기 위해서, 충돌 후 조건들로부터 반발계수와 역적비에 대한 적절한 추정 방법과 더불어 충돌 변형으로부터 유추할 수 있는 충돌 과정동안의 에너지 손실에 근거한 역해석 방안도 포함한다. 실차충돌 실험자료의 분석 결과에 따르면, 역적-운동량이론에만 근거한 역해석 결과뿐만 아니라 에너지 손실에 근거한 역해석 결과도 실험 결과와 좋은 일치를 보여주고 있다 강체역학의 범주내에서 역해석을 수행할 수 없는 공통속도 조건과 같은 경우나 반발계수에 관한 추정결과가 적절하지 않게 되는 등 단지 역적-운동량이론만을 이용한 해석 결과가 미흡한 경우에는 에너지 손실에 근거한 역해석 방법을 보완적으로 활용할 수 있을 것이다. 본 논문에서 제시한 충돌 과정 역해석 결과는 자동차충돌 해석 결과 및 충돌 전·후 거동에 대한 역미끄럼 해석 결과와 유기적으로 결합하여 자동차 충돌 사고 전 과정에 대한 직접적인 역해석을 수행할 수 있는 사고 재구성 패키지의 개발을 기대할 수 있다.

  • PDF

흉부결핵의 외과적 치료 (Surgical Treatment of Chest Tuberculosis)

  • 이정상
    • Journal of Chest Surgery
    • /
    • 제32권2호
    • /
    • pp.158-163
    • /
    • 1999
  • 배경: 흉부결핵의 외과적 치료성적을 분석하여 안정성을 확인하고 적응증을 넓히고자 한다. 대상 및 방법: 1992년 1월부터 1995년 5월까지 흉부결핵으로 진단받고 수술을 받은 107명중 저자에게 시술받은 87명의 병록지를 후향 분석하였다. 환자를 4군으로 분류하였다. 제 1군은 폐엽병변의 쇄기절제술 여부에 관계없이 폐박피술을 시행한 45명이고, 제 2군은 개흉술 여부에 관계없이 늑막주위 및 늑골결핵을 수술한 23명이며, 제 3군은 일측전폐적출술을 시행한 12명였으며, 제 4군은 시험적 개흉술 혹은 쇄기절제술을 시행받은 7명이었다. 결과: 수술 후 사망례는 없었으며, 수술 후 합병증은 흉벽육종을 동반한 환자에서 1례(1.1%)발생하였다. 결론: 적절한 내과적 치료 후 흉부결핵의 정확한 수술요법은 안전하고 만족스러운 결과를 보였으며, 근치를 위한 적응이 되며, 결핵균 보균자의 퇴출목적으로 수술 적응증을 넓일 수 있다는 것을 본 연구를 통하여 제시한다.

  • PDF

의료급여관리사의 직무스트레스와 직무만족도 (A Study of Job Stress and Job Satisfaction of Medical Aid Client Managers)

  • 최정명;오진주;이현주
    • 한국직업건강간호학회지
    • /
    • 제17권2호
    • /
    • pp.146-154
    • /
    • 2008
  • Purpose: The purpose of this study is to investigate the degree of job stress and job satisfaction and the relationship between job stress and job satisfaction of Medical Aid Client Managers. Method: Data were collected from 185 Medical Aid Client Managers in 234 areas between April 2-15, 2007. Collected data was analyzed for the frequency, t-test, ANOVA, Pearson's Correlation Coefficient etc. Results: The average score of job stress was 2.6. Job instability was highest as 2.9 and job autonomy was lowest as 2.2. in eight items. When the job stress of Medical Aid Client Managers was converted to 100 point, the average was 51.7 and ranked in upper 50% of Korean woman workers' job stress. Among the eight items, because the relationship satisfaction and the instability of duty regime ranked in upper 25% of Korean woman workers' job stress, those items were identified to have high stress. The average score of job satisfaction was 2.3 out 4.0 which could be interpreted as unsatisfactory. The correlation between the job stress and the job satisfaction demonstrated significant difference. Decrease of the job satisfaction was associated with increase of the job stress. In regard to the eight items, the inverse correlation was demonstrated to be significant in organization, inappropriate compensation, and workplace culture. Conclusion: Medical Aid Client Managers have high stress in carrying out their duties. They have experienced very severe instability in their duty regime. Also, they have felt alienated from their organization and experienced unfair rewards. They had low duty satisfaction but got a heavy workload and experienced overtime work. To relieve job overburden of Medical Aid Client Managers. it was necessary to improve business system and also was necessary to relieve a regional disparity of business charge.

  • PDF

대표 속성을 이용한 최적 연관 이웃 마이닝 (Optimal Associative Neighborhood Mining using Representative Attribute)

  • 정경용
    • 전자공학회논문지CI
    • /
    • 제43권4호
    • /
    • pp.50-57
    • /
    • 2006
  • 최근 정보 기술의 발전에 따라 다양하고 폭넓은 정보들이 디지털 형태로 빠르게 생산 및 배포되고 있다. 사용자가 이러한 정보과잉 속에서 자신이 원하는 정보를 단시간 내에 검색하는 것은 그리 쉬운 일이 아니다. 따라서 유비쿼터스 상거래에서 사용자가 정보를 효율적으로 이용할 수 있도록 제어하고 필터링하는 일을 도와주는 개인화된 추천 시스템이 등장하였으며, 더 나아가 사용자가 원하는 아이템을 예측하고 추천해주고 있으며 이를 위해 협력적 필터링을 적용하고 있다. 이는 사용자의 성향에 맞는 아이템을 예측하고 추천하기 위하여 비슷한 선호도를 가지는 사용자들간의 유사도 가중치를 계산한다. 본 연구는 정보의 속성에 대한 사용자의 선호도를 고려하지 않은 문제를 개선하기 위하여 연관 이웃 마이닝을 사용하여 대표속성에 대한 연관 사용자의 선호도를 협력적 필터링에 반영하였다. 연관 이웃 마이닝은 선호도에 가장 크게 영향을 미치는 속성을 추출하여 유사한 성향을 가진 연관 사용자를 군집한다. 제안된 방법은 사용자가 아이템에 대해서 평가한 MovieLens 데이터 집합을 대상으로 평가되었으며, 기존의 nearest neighbor model과 K-means 군집보다 그 성능이 우수함을 보인다.

세 가지 재분석 자료에서의 겨울철 북반구 평균 자오면 순환-에디 상호작용 (Mean Meridional Circulation-Eddy Interaction in Three Reanalysis Data Sets during the Boreal Winter)

  • 문혜진;하경자
    • 대기
    • /
    • 제25권3호
    • /
    • pp.543-557
    • /
    • 2015
  • The present study examines an interaction between the eddy and mean meridional circulation (MMC) comparing the results in three reanalysis data sets including ERA-Interim, NCEP2, and JRA-55 during the boreal winter in the Northern Hemisphere. It is noteworthy that the JRA-55 tends to produce stronger MMC compared to those of others, which is mainly due to the weak eddy flux. ERA-Interim represents the ensemble averages of MMC. The MMC-eddy interaction equation was adopted to investigate the scale interaction of the eddy momentum flux (EMF), eddy heat flux (EHF), and diabatic heating (DHT) with MMC. The EMF (EHF) shows a significant correlation coefficient with streamfunction under (above) 200 hPa-level. The perturbation (time mean) part of each eddy is dominant compared to another part in the EMF (EHF). The DHT is strongly interacted with streamfunction in the region between the equator and extra-tropical latitude over whole vertical column. Thus, the dominant term in each significant region modulates interannual variability of MMC. The inverse (proportional) relationship between MMC and pressure (meridional) derivative of the momentum (heat) divergence contributions is well represented in the three reanalysis data sets. The region modulated interannual variability of MMC by both EMF and DHT (EHF) is similar in ERA-Interim and JRA-55 (ERA-Interim and NCEP2). JRA-55 shows a lack of significant region of EHF due to the high resolution, compared to other data sets.

Diffusion Behavior of n-Alkanes by Molecular Dynamics Simulations

  • Goo, Geun-Hoi;Sung, Gi-Hong;Lee, Song-Hi;Chang, Tai-Hyun
    • Bulletin of the Korean Chemical Society
    • /
    • 제23권11호
    • /
    • pp.1595-1603
    • /
    • 2002
  • In this paper we have presented the results of diffusion behavior of model systems for eight liquid n-alkanes ($C_{12}$-$C_{44}$) in a canonical (NVT) ensemble at several temperatures using molecular dynamics simulations. For these n-alkanes of small chain length n, the chains are clearly <$R_{ee}^2$>/6<$R_g^2$>>1 and non-Gaussian. This result implies that the liquid n-alkanes over the whole temperatures considered are far away from the Rouse regime, though the ratio becomes close to the unity as n increases. Calculated self-diffusion constants $D_{self}$ are comparable with experimental results and the Arrhenius plot of self-diffusion constants versus inverse temperature shows a different temperature dependence of diffusion on the chain length. The global rotational motion of n-alkanes is examined by characterizing the orientation relaxation of the end-to-end vector and it is found that the ratio ${\tau}1/{\tau}2$ is less than 3, the value expected for a isotropically diffusive rotational process. The friction constants ${\xi}$of the whole molecules of n-alkanes are calculated directly from the force auto-correlation (FAC) functions and compared with the monomeric friction constants ${\xi}_D$ extracted from $D_{self}$. Both the friction constants give a correct qualitative trends: decrease with increasing temperature and increase with increasing chain length. The friction constant calculated from the FAC's decreases very slowly with increasing temperature, while the monomeric friction constant varies rapidly with temperature. By considering the orientation relaxation of local vectors and diffusion of each site, it is found that rotational and translational diffusions of the ends are faster than those of the center.

가변길이 다중비트 코딩을 이용한 DCT/IDCT의 설계 (Variable Radix-Two Multibit Coding and Its VLSI Implementation of DCT/IDCT)

  • 김대원;최준림
    • 대한전자공학회논문지SD
    • /
    • 제39권12호
    • /
    • pp.1062-1070
    • /
    • 2002
  • 본 논문은 가변길이 다중비트 코딩 알고리듬을 제안하고 DCT/IDCT(이산여현변환/역이산여현변환)설계에의 적용 과정을 제시한다 가변길이 다중 비트 코딩은 일반적인 Booth's알고리듬과 같이 중첩에 의한 다중비트 코딩을 가변적인 방법을 사용하여 그 중 2의 멱승이 되는 부분 즉 2k의 SD(Signed Digit)을 생성하는 방법이다. 이렇게 발생된 SD는 곱셈에 있어서 2k의 부분적(Partial Product)을 생성하게 되고 이로 인해 필요한 하드웨어는 단순한 덧셈기와 쉬프트 연산에 필요한 플립플롭만 필요하게 되므로 설계과정에 있어서 칩의 면적과 속도 면에서 효율적인 방법이다. 본 논문에서는 이 알고리듬의 정의 및 증명과정과 실제 알고리듬 적용을 위한 DCT/IDCT의 설계방법을 논의하고 제작한 IDCT의 결과에 대해 논의한다. 설계된 IDCT칩은 병렬 고속 처리를 위한 8개의 PE(Processing Element)와 하나의 전치 메모리를 사용한 방법으로 54MHz에서 400Mpixels/sec의 동작속도를 가지며 HDTV 및 MPEG 디코더에 적용하여 동작을 검증하였다.

인산염 가용화균 Enterobacter agglomerans에 의한 Hydroxyapatite 가동화와 유기산 생성 (Hydroxyapatite Solubilization and Organic Acid Production by Enterobacter agglomerans)

  • 김길용
    • 한국토양비료학회지
    • /
    • 제30권2호
    • /
    • pp.189-195
    • /
    • 1997
  • 본 실험은 인산염 분해균을 밀의 근권토양으로부터 분리 동정하고 인산염 분해균의 유기산 생성과 pH와의 관계를 조사하기 위해 실시하였다. 인산염 분해균은 36시간 배양후 선명한 투명대(clear zone)를 형성하였다. API 20E System과 BIOLOG$^{TM}$ analysis를 사용하여 동정한 결과 이 균주는 Entrobacter agglomerans로 동정되었다. Similarity와 distance는 각자 0.656과 4.790로 나타났다. Hydroxyapatite를 함유한 배지에서 E. agglomerans를 배양하는 동안 인산의 농도가 현저히 증가하였으며, pH와 인산의 농도와는 고도의 역상관($r^2=0.933$)을 보였다. HPLC로 분석한 결과 이 균주는 여러 가지 유기산을 생성하였으며 그 중 oxalic acid가 가장 많이 생성되었다. Acid phosphatase는 alkaline phosphatase에 비해서 10-15배의 활성을 보였으며, alkaline phosphatase는 배양 동안 거의 0에 가까운 활성을 보였다. E. agglomerans의 population은 배양 하루 동안 현저히 증가하였으나 그 후 급격히 감소하였다.

  • PDF

합류식 하수관거 월류수 저장 시설에 대한 효과 - 강우시 합류식 하수관거에서의 오염물질 유출특성 분석 (Effect for CSOs Storage Construction - Analysis of Storm Water Run-off Characteristics in combined sewer system)

  • 박진규;이남훈;김해룡;이웅;이채영
    • 상하수도학회지
    • /
    • 제25권6호
    • /
    • pp.949-957
    • /
    • 2011
  • This aim of study was to investigate the characteristics of discharge of pollutants as well as the correlation between flow rate and water quality constituents in a combined sewer system according to the characteristics of rainfall. For the loading rates for each pollutant, the median concentrations of all pollutants except T-N was increased when a CSO took place. The loading rates of BOD, COD, SS, T-N, T-P, Cu and Zn at the CSOs were 328-1255, 25-129, 83-2009, 4-12, 14-51, 5-11 and 5-13 times higher than the DWF (Dry Whether Flow), respectively. Especially, SS loading rate was found to be highest in all pollutants. On the other hand, the range of the first flush coefficient, b for water quality constituents such as BOD, COD, SS, T-N, T-P, Cu and Zn were 0.537-0.878, 0.589-0.888, 0.516-1.062, 0.852-1.031, 0.649-0.954, 0.975-1.015 and 0.900-1.114, respectively. In term of correlation between flow rate and pollutant concentrations, SS concentration was highly correlated to flow rate. However, there was an inverse correlation between EC (Electrical Conductivity) and flow rate because of the high dilution of flow rate. In case of correlation between pollutants, there was a high correlation between SS and T-P.

스펙트럼을 이용한 피로손상도 계산과정 최적화 연구 (Study on Optimization of Fatigue Damage Calculation Process Using Spectrum)

  • 김상우;이승재;최솔미
    • 한국해양공학회지
    • /
    • 제32권3호
    • /
    • pp.151-157
    • /
    • 2018
  • Offshore structures are exposed to low- and high-frequency responses due to environmental loads, and fatigue damage models are used to calculate the fatigue damage from these. In this study, we tried to optimize the main parameters used in fatigue damage calculation to derive a new fatigue damage model. A total of 162 bi-modal spectra using the elliptic equation were defined to describe the response of offshore structures. To calculate the fatigue damage from the spectra, time series were generated from the spectra using the inverse Fourier transform, and the rain-flow counting method was applied. The considered optimization variables were the size of the frequency increments, ratio of the time increment, and number of repetitions of the time series. In order to obtain optimized values, the fatigue damage was calculated using the parameter values proposed in previous work, and the fatigue damage was calculated by increasing or decreasing the proposed values. The results were compared, and the error rate was checked. Based on the test results, new values were found for the size of the frequency increment and number of time series iterations. As a validation, the fatigue damage of an actual tension spectrum found using the new proposed values and fatigue damage found using the previously proposed method were compared. In conclusion, we propose a new optimized calculation process that is faster and more accurate than the existed method.