• Communications for Statistical Applications and Methods
• /
• 제15권3호
• /
• pp.429-440
• /
• 2008

In this paper, we develop the noninformative priors when the parameter of interest is the common coefficient of variation in two inverse Gaussian distributions. We want to develop the first and second order probability matching priors. But we prove that the second order probability matching prior does not exist. It turns out that the one-at-a-time and two group reference priors satisfy the first order matching criterion but Jeffreys' prior does not. The Bayesian credible intervals based on the one-at-a-time reference prior meet the frequentist target coverage probabilities much better than that of Jeffreys' prior. Some simulations are given.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권5호
• /
• pp.549-556
• /
• 1997

The inverse heat conduction problems is the calculation of surface heat transfer coefficients by utilizing measured temperature. The numerical technique of finite element analysis and optimizition is introduced to calculate temperatures and heat transfer coefficients. The calculated heat transfer coefficients and temperature distribution are good agreement with the results of direct analysis. The inverse method has been applied to the control valve of nuclear power plant.

• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.106-113
• /
• 2004

Most of mechanical structures are composed of many substructures connected to one another by various types of mechanical joints. In automotive engineering, it is important to study these connected structures under various dynamic forces for the evaluations of fatigue life and stress concentration exactly. In this study, the dynamic response of vehicle structure to external forces is classified an inverse problem involving strains from the experiment and the analysis. The practical dynamic forces are determined by the combination of the analytical and experimental method with analyzed strain by quasi-static finite element analysis under unit force and with measured strain by a strain gage under driving load, respectively. In a stressed body, inter-molecular chemical bonds are failed beyond the certain magnitude. The failure of molecular structure in material is considered as a time process of which rate is determined by mechanical stress. That is, the failure of inter-molecular chemical bonds is the fatigue lift of material. This kinetic concept is expressed as lethargy coefficient. And S-N curve is obtained with the lethargy coefficient from quasi-static tensile test. Equivalent practical dynamic force is obtained from the identification of practical dynamic force for one loading point. Using the practical dynamic force and S-N curve, fatigue life of a window pillar is analyzed with FEM under the identified force by the procedure of above mentioned.

• 한국지반환경공학회 논문집
• /
• 제13권8호
• /
• pp.15-24
• /
• 2012

수평하중을 받는 말뚝의 해석에서 수평지반반력계수($k_h$)의 결정이 중요하나 시간과 비용 등의 문제로 기존의 제안식을 이용하여 수평지반반력계수를 산정하고 있어 말뚝기초의 거동을 상이하게 평가하고 있다. 따라서, 본 연구에서는 수평재하시험결과를 이용한 Chang 방법 및 수치해석 역해석 방법으로 수평지반반력계수를 산정하여 기존 제안식과의 상관성을 비교 분석하여 적정성 및 신뢰성을 규명하였다. 수평재하시험에 의한 수평지반반력계수 분석결과는 Chang 방법으로 산정된 값이 역해석에 의한 방법에 비해 과소평가 되었다. 그리고 도로교 표준시방서 방법으로 산정 시 지반의 변형계수는 Eo${\fallingdotseq}$1,400~1,600N 적용하는 경우 수평재하시험에 의한 수평지반반력계수와 유사한 범위를 가지는 것으로 확인되었다.

• 대한수학회보
• /
• 제50권5호
• /
• pp.1531-1538
• /
• 2013

In the present investigation, the author introduces two interesting subclasses of normalized meromorphic univalent functions $w=f(z)$ defined on $\tilde{\Delta}:=\{z{\in}\mathbb{C}:1<{\mid}z{\mid}<{\infty}\}$ whose inverse $f^{-1}(w)$ is also univalent meromorphic in $\tilde{\Delta}$. Estimates for the initial coefficients are obtained for the functions in these new subclasses.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4096-4101
• /
• 2023

Radon is a radioactive gas produced from the uranium-238 series. Radon gas affects public health and is the second cause of lung cancer. The study samples were collected from one area of the city of Jazan, southwest of the Kingdom of Saudi Arabia. The influence of engineering and physical parameters on the emanation coefficient of gas and other gas parameters was studied. Parameters for radon were measured using a CR-39 Solid-State Nuclear Track Detector (SSNTD) through a sealed emission container. The results showed that the emanation coefficient was affected directly by the change in the grain size of the soil. All parameters of measured radon gas have the same behavior as the emanation coefficient. The relationship between particle size and emanation coefficient showed a good correlation. The values of the emanation coefficient were inversely affected by the mass of the sample, and the rest of the parameters showed an inverse behavior. The results showed that increasing the volume of the container increases the accumulation of radon sons on the wall of the container, which increases the emission factor. The rest of the parameters of radon gas showed an inverse behavior with increasing container size. The results concluded that changing the engineering and physical parameters has a significant impact on both the emanation coefficient and all radon parameters. The emanation coefficient affects the values of the radiation dose of an alpha particle.

• Advances in aircraft and spacecraft science
• /
• 제4권4호
• /
• pp.437-448
• /
• 2017

The problem of flow through the vent is formulated as an unsteady, nonlinear, ordinary differential equation and solved using Runge-Kutta method to obtain pressure inside payload faring. An inverse problem for prediction of the discharge coefficient is presented employing measured internal pressure of the payload fairing during the ascent phase of a satellite launch vehicle. A controlled random search method is used to estimate the discharge coefficient from the measured transient pressure history during the ascent period of the launch vehicle. The algorithm predicts the discharge coefficient stepwise with function of Mach number. The estimated values of the discharge coefficients are in good agreement with differential pressure measured during the flight of typical satellite launch vehicle.

• 소성∙가공
• /
• 제20권7호
• /
• pp.473-478
• /
• 2011

In this study, the performance of a thermo siphon type radiator made of copper for LED lighting system was evaluated by using an inverse heat transfer method. Heating experiments and finite element heat transfer analysis were conducted for three different cases. The data obtained from experiments were compared with the analysis results. Based on the data obtained from experiments, the inverse heat transfer method was used in order to evaluate the heat transfer coefficient. First, the heat transfer analysis was conducted for non-vacuum state, without the refrigerant. The evaluated heat transfer coefficient on the radiator surface was 40W/$m^2^{\circ}C$. Second, the heat transfer analysis was conducted for non-vacuum state, with the refrigerant, resulting in the heat transfer coefficient of 95W/$m^2^{\circ}C$. Third, the heat transfer analysis was conducted for vacuum state, with refrigerant. For the third case, the evaluated heat transfer coefficients were 140W/$m^2^{\circ}C$. Third, the heat transfer analysis was conducted for vacuum state, with refrigerant. For the third case, the evaluated heat transfer coefficients were 140W/$m^2^{\circ}C$ for the radiator body, 5W/$m^2^{\circ}C$. Third, the heat transfer analysis was conducted for vacuum state, with refrigerant for the rising position of radiator pipe, 35W/$m^2^{\circ}C$. Third, the heat transfer analysis was conducted for vacuum state, with refrigerant. For the highest position of radiator pipe, and 120W/$m^2^{\circ}C$ for the downturn position of radiator pipe. As a result of inverse heat transfer analysis, it was confirmed that the thermal performance of the current radiator was best in the case of the vacuum state using the refrigerant.

• 대한수학회보
• /
• 제49권5호
• /
• pp.1067-1079
• /
• 2012

Let M be a right R-module, (S, ${\leq}$) a strictly totally ordered monoid which is also artinian and ${\omega}:S{\rightarrow}Aut(R)$ a monoid homomorphism, and let $[M^{S,{\leq}}]_{[[R^{S,{\leq}},{\omega}]]$ denote the generalized inverse polynomial module over the skew generalized power series ring [[$R^{S,{\leq}},{\omega}$]]. In this paper, we prove that $[M^{S,{\leq}}]_{[[R^{S,{\leq}},{\omega}]]$ has the same uniform dimension as its coefficient module $M_R$, and that if, in addition, R is a right perfect ring and S is a chain monoid, then $[M^{S,{\leq}}]_{[[R^{S,{\leq}},{\omega}]]$ has the same couniform dimension as its coefficient module $M_R$.

• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.126-131
• /
• 2001

One of the major obstacles in testing or evaluating precisely the thermal behavior of a machine tool is the difficulty in measuring the heat transfer coefficients on the surfaces by a conventional method. This paper presents a new approach based on the inverse method to identify the values of heat transfer coefficients by using temperature changes measured on the surfaces of a machine tool during a short period in its operating. In the present method, a machine tool structure is modeled by the finite element method and the characteristic curves of the temperature change at several points on machine tool surfaces are theoretically derived in the form that they contain the heat transfer coefficient as an unfixed heat source are approximated so that the theoretical characteristic curves of temperature change fit the measured ones as closely as possible.