• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.4
• /
• pp.460-471
• /
• 2011

A port has been regarded as a significant contributor to air pollution in the surrounding areas. Port-related air pollutants are released from not only marine vessels, but also various land-side sources at ports, which include cargo handling equipment, vehicles, locomotives, and fugitive dust sources by port activities such as bulk handling and vehicle movements. However, most studies in Korea have only focused on vessel emissions and there is a lack of information on the emissions from other sources at port. In this study, in order to establish the port-related emission inventory and evaluate the relative contribution of these sources to air emissions from the Port of Incheon, the emissions from land-side sources were estimated and the CAPSS (Clean Air Policy Support System) data for vessel emissions were used. In particular, the detailed information and activity data for the cargo handling equipment source were collected and the emission factors and emissions by equipment types were calculated using U.S. EPA methodologies. Total HC, CO, $NO_x$, $PM_{10}$, and $SO_2$ emissions from port-related sources including the vessel in 2007 were calculated as 229 ton/year, 638 ton/year, 4,861 ton/year, 307 ton/year, and 3,995 ton/year, respectively. It was found that the vessel was the largest contributor to air pollutant emissions from the port, the cargo handling equipment was responsible for about from 8% to 13% of HC, CO, and $NO_x$ emissions and the resuspended road dust contributed about 39% for $PM_{10}$ emissions. The results of this study will be used to establish the management and reduction strategies of air pollution in the port.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.2
• /
• pp.24-35
• /
• 2021

Due to increasing awareness on the treatment of end-of-use/life products, disassembly has been a fast-growing research area of interest for many researchers over recent decades. This paper introduces a novel lot-sizing problem that has not been studied in the literature, which is the service-parts lot-sizing with disassembly option. The disassembly option implies that the demands of service parts can be fulfilled by newly manufactured parts, but also by disassembled parts. The disassembled parts are the ones recovered after the disassembly of end-of-use/life products. The objective of the considered problem is to maximize the total profit, i.e., the revenue of selling the service parts minus the total cost of the fixed setup, production, disassembly, inventory holding, and disposal over a planning horizon. This paper proves that the single-period version of the considered problem is NP-hard and suggests a heuristic by combining a simulated annealing algorithm and a linear-programming relaxation. Computational experiment results show that the heuristic generates near-optimal solutions within reasonable computation time, which implies that the heuristic is a viable optimization tool for the service parts inventory management. In addition, sensitivity analyses indicate that deciding an appropriate price of disassembled parts and an appropriate collection amount of EOLs are very important for sustainable service parts systems.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.101-103
• /
• 2021

With the rapid increase in the quantity of goods transported worldwide, companies are now started to show great interest in unmanned automated warehouses along with related research and development due to the increase of warehouse efficiency and reduction warehouse manpower. In a number of small warehouses, shuttle rack-based layouts that can handle inventory flow flexibly. However, the shuttle rack-based logistics center does not operate in case of emergency situations (faults, power outages, etc.), which seriously affects the efficiency and inventory management of the entire logistics center. Accordingly, in shuttle rack-based logistics center, we have classified various shuttle passages and RTV passages by layout and have analyzed its characteristics and types, along with derived reliability for each layout. The loading rate was also derived differently according to the number of passages, and have compared and analyzed reliability and loading rate for each layout.

• Journal of Information Technology Services
• /
• v.15 no.1
• /
• pp.227-243
• /
• 2016

In order to maximize profitability by optimizing the entire supply chain process, enterprises have made efforts to apply IT technologies such as POS, MES, and TMS. In addition, academic societies have also made efforts to verify the effects of IT technology introduction through various researches. However, until now, there is almost no research that analyzes the relationship between the IoT, a new IT technology, and the SCM. To study the effect of IoT technology on SCM, this study conducted professional Delphi surveys for three times. Through this method, this study analyzed changes that will be caused by the IoT technology, the priority area in IoT introduction, and the expected difficulty in IoT introduction on SCM. As a result of the Delphi surveys and analyses, it was expected that when IoT technology is introduced, the level of SCM's IT use and partnership will increase. However, the effect of the increased performance of the supply chain, which includes inventory management and quality control, will become weaker. The reason is that the development of operation and management skills, as well as the improvement of IT technology, are also important elements for the performance improvement of the supply chain. As for the priority area in IoT introduction, it was expected that the effect will be greater when IoT is introduced in customer service, transportation, and delivery areas. As difficulties in IoT technology introduction, such as the shortage of IoT platform development personnel, standardization, integration with the existing system, securing professional manpower, expenses, data management, and operation, were derived, it has thus become necessary for us to exert greater efforts in order to come up with solutions.

• The Journal of the Korea Contents Association
• /
• v.7 no.10
• /
• pp.302-310
• /
• 2007

This research, through an empirical analysis of the management of food materials in the super deluxe and deluxe hotels in Seoul, verified the difference, and established strategies according to the difference. According to the study, to enhance the level of the food material management, the introduction of scientific methods and system of the deluxe hotels has to be preceded, the training of special inspectors and the utilization of inspection methods needs improvement, and the purchasing contracts and effective purchasing methods have to be renewed. As for the storing management, the difference between hotel grades was low. The implication of this study as follows. First, to enhance the efficiency of man power operation, we have to introduce computer systems. Second, training based on the food materials purchasing manual has to be achieved. Third, we have to increase inspectors' specialty through the arrangement of man power rotation.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.3
• /
• pp.119-129
• /
• 2013

This study was conducted to predict the changes in forest biomass in different ecoprovinces and forest types under climate change scenario based on cumulative data (i.e., digital forest site and climate maps, National Forest Inventory data) and various prediction models. The results from this study showed that predicted changes over time in biomass varied according to ecoprovince and forest type in Korea. A reduction in biomass was predicted for all forest types associated with the mountain, southeastern hilly, and southwestern hilly ecoprovinces. On the other hand, the biomass was predicted to increase for the coniferous forest and mixed-forest types in the central hilly ecoprovince. Furthermore, increases in biomass are predicted for all forest types, except coniferous forests, in the coastal ecoprovince. The results from this study provide a basis for developing technology to predict forest impacts due to climate change by predicting changes in forest biomass based on the estimation of site index.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.4
• /
• pp.55-66
• /
• 2020

This study developed four algorithms and their associated indices that can quantify and qualify road hazards along roadways. Initially, relevant raw data can be collected from commercial vehicles by camera and DTG. Well-processed data, such as potholes, road freezing, and fog, can be generated from the Integrated management system. Road hazard algorithms combine these data with road inventory data in the Data Sharing Platform. Depending on well-processed data, four different road hazard algorithms and their associated indices were developed. To test the algorithms, an experimental plan based on passive DTG attached in probe vehicles was performed at two different test locations. Selection of the test routes was based on historical data. Although there were limitations using random data for commercial vehicles, hazardous roadways sections, such as fog, road freezing, and potholes, were generated based on actual historical data. As a result, no algorithm error was found in the entire test. Because this study provides road hazard information according to a section, not a point, it can be practically helpful to road users as well as road agencies.

• The Journal of the Korea Contents Association
• /
• v.12 no.3
• /
• pp.295-310
• /
• 2012

The purpose of this research is to examine qualitative and quantitative performance on SCM. To validate our research model, five hundred survey questionnaires were distributed to the companies that have implemented SCM systems for at least one year. A total of 153 valid responses were obtained. In this research, we were to derive influencing factors of SCM performance, modelize the mutual influential relationship between them, and look into the influential relationship influencing the SCM performance. Moreover, we tried to analyze difference of financial ratios after adopting SCM. The results of the research can be summarized as follows. Change management had a significant impact on information system quality and SCM performance, and, information system quality had a significant impact on SCM performance. And, the difference of financial ratio was existed after the adopting SCM. Moreover, inventory turnover rates, ROI, ROA were increased, and labor costs to sales was decreased.

• Management & Information Systems Review
• /
• v.28 no.3
• /
• pp.1-23
• /
• 2009

Prior bankruptcy studies have established that bankrupt firm's pre-filing financial ratios are different from those of healthy firms or of randomly selected going concerns. However, they may not be sufficiently different from the financial ratios of other firms in financial distress to allow the development of a ratio-based model that predicts bankruptcy with reasonable accuracy. As the result, in the multiple discriminant model, independent variables divided firms into bankrupt firms and healthy firms are retained earnings to total asset, receivable turnover, net income to sales, financial expenses, inventory turnover, owner's equity to total asset, cash flow to current liability, and current asset to current liability. Moreover four variables Retained earnings to total asset, net income to sales, total asset turnover, owner's equity to total asset indicate that these valuables classify bankrupt firms and distress firms. On the other hand, Owner's Equity to borrowed capital, Ordinary income to Net Sales, Operating Income to Total Asset, Total Asset Turnover and Inventory Turnover are selected to predict bankruptcy possibility in the Logistic regression model.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1244-1249
• /
• 2007

Pursuing sustainable development throughout society and industry and the field of environmental policy, each international organization or nation has performed international standardization projects on environmental management activities for their system as well as environmental assessment for a product such as life cycle assessment (LCA) and life cycle inventory database (LCI DB), and the environmental aspects have been increasingly demanded as crucial evaluation specifications. Moreover, the conventional environmental policy, which represents the direct-control, has been more dependent on the market forces and product itself after the Climate Change Convention., and the Integrated Product Policy (IPP, EU) is applied vigorously to strengthen global competitiveness of a product and to achieve the effect of environmental improvement for it. According to change of the international railway market, the value of Eco-Design has been increasingly important in developed countries including EU. Thus, each country is establishing its own guidelines, software and database for each product, and developing new policies through Eco-Design with practical results in marketing. To react this and develop Korean railway as an environment-friendly industry with priority to other transportation system as well as maintain high place in technology, the direction of RACE software development of main function is introduced, which is exclusively used for EMU to assess both environmental and economic aspects with LCA and eco-efficiency (EE).