• Journal of Environmental Impact Assessment
• /
• v.21 no.3
• /
• pp.409-415
• /
• 2012

Post-kyoto regime has been discussing with the GHG reduction commitment. GHG energy target management system also has been applied for the domestic measures in the country. Universities are major emission sources for GHG. It is very important for campus to built the GHG inventory system and estimate the potential GHG emission reduction. In general, GHG inventory on the campus was taken by the IPCC guidance with the classification of scope 1, 2, and 3. Electricity was the highest portion of GHG emission on the campus as 5,053.90 $tonsCO_2eq/yr$ in 2009. Manufacturing sector was the second high emission and meant GHG in laboratory. Potential GHG reduction was planned by several assumptions such as installation of occupancy sensor, exchanging LED lamp and photovoltaic power generation. These reduction scenarios was simulated by LEAP model. In 2020, outlook of GHG emission was estimated by 17,435.98 tons of $CO_2$ without any plans of reduction. If the reduction scenarios was applied in 2020, GHG emission would be 16,507.60 tons of $CO_2$ as 5.3% potential reduction.

• Proceedings of the Safety Management and Science Conference
• /
• 2002.11a
• /
• pp.227-232
• /
• 2002

Enormous flocks by the reduced life cycle of products caused by the technological innovation if later 20 century, development of new materials and diversified demands of customers appeared as the pressing element causing the trouble in management of companies, and when considering the logistic costs that are imposed to companies in terms of function, the costs related to the stock topped the list of costs, followed by the transportation ones, and for pallet pool system, inventory of stocks is very difficult by the number of companies. Reducing the logistic cost may be accomplished by numbers of logistic management methods, but the most fundamental and essential one is the accomplishment of the consistent pallet system that is the core of unit load system, and the purpose of consistent pallet system is the treatment of logistic functions such as transportation, storage and unloading with consistent pallet system, and increasing the turnover ratio is required for the improvement of the system. As the turnover ratios is increased, more pallets will be used so, numbers of empty pallets will be increased accordingly by returning the pallet. Therefore, in this study, we will establish the effective stock management system by comparing with the other existing stock management system after looking at the concept and examples of pallet full system in order to resolved this kind of problem.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.4
• /
• pp.73-85
• /
• 2002

The supply chain not only includes the manufacturer and suppliers, but also transporters, warehouses, retailers, and customers themselves. Within each organization, such as manufacturer, the supply chain includes all functions involved in filling a customer request. these functions include, but are not limited to, new product development, marketing, operation, distribution, finance, and customer service. Lean Supply chain coordination improves if all supplier of chain take actions that together increase total supply chain profits. To design of Modularity by the grouping supplier, the proposed method is to develop the most appropriate production system models in the Supply Chain Management which is necessity of the times and its importance. The objects of this study is development of model and cost analysis to the modular production system in Lean SCM. Introduction of modular production system in Lean SCM is effective in reducing the cost in processing, manufacturing, inventory holding, ordering, etc.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.3
• /
• pp.301-308
• /
• 2011

International Maritime Organization (IMO) proposed the Energy Efficiency Operation Indicator (EEOI) in 2005 and the Energy Efficiency Design Index (EEDI) in 2008 so as to address emission concern and regulation. Likewise, Ship Energy Efficiency Management Plan (SEEMP) and Greenhouse Gas (GHG) monitoring and management are also becoming an issue lately. This paper introduces the energy efficiency design index (operation indicator) monitoring system (EDiMS) software can continuously monitor $CO_2$, $NO_x$, $SO_x$, and PM values emitted from ship. The accurate inventory of ships GHG can be obtained from base of emission result during the engine shop test trial and the actual monitoring of shaft power and ship speed. In addition, the ability to store all exhaust emission and engine operation data can be applied as the useful tool of the inventory work of air pollution and ship energy management plan for the mitigation or reduction of ship emissions.

• Management & Information Systems Review
• /
• v.26
• /
• pp.27-60
• /
• 2008

Researches on the introduction of ERP system kept on examining the critical successful factors (CSFs) that focus on factors to achieve effectively successful projects, and trying to measuring the actual effectiveness of the introduction of ERP system. However, most of the preceding researches on the effectiveness of the introduction of ERP system that was searching devoted effects has been ceased, and actually even researches on the economical results have just done the basic cognitive evaluation of result indicators by many questionnaires instead of objective measuring values, because of the difficulty of measuring the evaluation of the result. Moreover, researches on positive effects of the introduction of ERP on enterprise results and researches that failed to give advantageous effects showed different results each other. And a part of researches reported that only a part of result indicators were partially affected. In this research, we investigated Korean large enterprises or middle-sized enterprises in manufacture industry that introduces SAP R/3 and Oracle package to compare their quantitative financial results after the introduction of ERP system, in order to measure the effects of the ERP system. First, we evaluated the difference of the quantitative financial results before and after the introduction of the ERP system. Second, we evaluated the opportunities shown by the effects after the introduction of the ERP system. Third, we removed the sample of the exchange crisis (IMF) and executed the additional analysis to reflect the average increasing and decreasing rate in the industry, so that pure evaluation can be achieved. Inherent limits of precedent researches are removed and practical effects of the pure introduction of the ERP system are evaluated, so the research of this research is significant. The result of this research is as follows. Because of the introduction of ERP, the rate of turnover of inventory property has increased and sales of preparation inventory property have decreased so that more effective inventory property management has been achieved. Moreover, preparation sales of labor costs and preparation sales of the number of employees have decreased to show the effect of the reduction of labor costs. However, it could no be concluded that we could increase the profit due to the introduction of ERP system. Due to the introduction of ERP, although we concluded that the return on assets (ROA) and the additional value of one-person employee statistically showed obvious differences and increased, the return on equity failed to show obvious differences after the process of introduction of ERP.

• Journal of the Korean Home Economics Association
• /
• v.29 no.2
• /
• pp.77-86
• /
• 1991

본 연구의 목적은 1) 집단 급식소의 재고 관리 시스템에 관한 자기학습식 Module (Self-instructional Module)을 개발하고, 2) 비동등 통계 실험연구 디자인 (Nonequivalent Control group research design)을 사용하요 자기학습식 재고 관리 시스템 Module의 교육적 효과를 평가하여, 3) 교육기관 및 집단 급식소에서의 교육용 교재로서의 타당성 여부를 검증하고자 함이다. 집단급식소의 재고 관리 시스템에 관한 자기학습식 Module을 개발하기 위해서 현재 미국 전역의 가정대학 내의 식품영양 및 급식경양학과에서 재고 관리에 관련된 교과목을 위하여 채택되어 사용되어지고 있는 주요 교과서들의 내용 분석과 급식경영학 전공 교수 3인의 판단에 기초를 두어 재고관리에 포함되어야 할 내용이 분석되었다. 포함되어져 있는 내용의 목차는 반입(receiving), 저장(storing), 출고(issuing), 재고통제(inventory control), 재고의 자산적 가치(inventory valuation) 및 재고관리 시스템의 자동화(inventory control computer system)등이다. 실험 대상은 Iowa 주립대학에서 급식정보관리 (Foodservice Management Information System) 과목을 수강하였던 88명의 학생이며, 강의를 통해 수업을 받은 통제집단 46명과, 자기 학습식 Module을 사용했던 실험집단 42명으로 구성되었다. 모든 실험 대상에게는 사전검사(Pretest)와 사후검사(posttest)를 실시하였으며 자료의 처리는 SPSS PC Package를 통계법으로 분석하였다. 연구결과는 강의 중심의 통제집단과 자기학습식 Module을 사용했던 실험집단 간의 통제 후 평균 값(posttest adjusted mean score)사이에는 유의적인 차이를 보였으며 (p<0.05), 자기 학습식 Module 그룹에 속해 있던 학생들이 더 높은 통제 후 평균값(adjusted mean score)을 보여 주었다. 그러므로, 이 실험을 통하여, 개발된 집단 급식소 재고관리 시스템에 대한 자기학습식 Module은 학생들에게 재고관리 시스템에 관한 개념과 내용의 습득력을 향상시키는데 있어서 적어도 강의식 교수법과 동일하거나 더나은 교육적 효과를 가져왔다고 판단되었다.

• Journal of Information Technology Applications and Management
• /
• v.15 no.3
• /
• pp.79-90
• /
• 2008

With the corporate environment nowadays being surrounded by plenty of information, the sharing of information among businesses through mutual cooperation tops the list of hot issues. Predictions of demands from the customer, business, or consumer by sharing information can affect the inventory and order production system. However, notwithstanding the importance of sharing information, empirical studies on quantitative use of information still remain insufficient in spite of many a discussion now being made on the sharing of information. This paper proposes to examine the ways meteorological information may affect the rises in the achievements of supply chains in distributive businesses, the kind of information that noticeably affects the consumer behavioral patterns in the distributive businesses but rarely perceived as a form of information shared by businesses. This study is based on a model in which meteorological information has been added as the one used to predict demands, after the beer distribution game has been modified to fit the current status, and simulations under an assumptive situation, where decisions are made on a daily basis, were conducted 50 times for a period of 1000 days for the generalization of the results, while at the same time a Duncan Test was conducted to determine the threshold to use the meteorological information that will be most profitable to the retailer, wholesaler, supplier and the supply chain as a whole. Our findings indicate that corporations have thresholds that vary from business to business depending upon the ratio of backlog costs to inventory costs. At the same time, our findings also show that there existed effective thresholds depending upon the ratio of backlog costs to inventory costs for the performance of the overall supply chain.

• Proceedings of the CALSEC Conference
• /
• 1998.10a
• /
• pp.247-254
• /
• 1998

국내/외 제조업체 또는 유통업체가 경쟁력 있는 제품의 생산/판매를 위해 최적의 부품 및 제품을 최단 시간내, 최저 가격으로 조달하기 위한 Global sourcing체계 구축과 그에 따른 재고부담을 회피하면서 제품을 소비자에게 신속히 전달하려는 공급선관리 (Supply Chain Management : SCM)의 의지가 높아지고 있다. 이에 따라 제조업체나 유통업체가 자체 재고 및 관리부담을 감소시키기 위해 JIT(Just In Time)체계의 업무형태를 도입하고 있고 부품 및 제품을 공급하는 공급자에게 제조업체의 재고를 관리하게 하는 형태인 이른바 공급자 재고관리(Supplier Managed Inventory： SMI)가 공급업체에게 요구되고 있다. 또한 최근 국내 제조업의 생산기반이 급속히 해외이전 됨에 따라 해리 생산거점과 국내본사, 주문자에 이르는 전 과정에 걸친 물류 및 정보전달 체계를 확보해야 하는 상황에서 공급업체는 주문업체로부터 주문한 내용의 진행상황과 자동적인 재고의 판단 및 보충에 이르는 전 과정의 프로세스 관리 및 관련 정보제공을 요구 받고있다. 이와 같은 환경에 대응하기 위해 본 발표에는 공급자 재고관리의 정의 및 Global business 환경에서 EDI를 통한 System의 구축방안 및 고려사항을 제시하고자 한다.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.28 no.2
• /
• pp.146-151
• /
• 2005

Some distributions have been used for diagnosing the lead time demand distribution in inventory system. In this paper, we describe the negative binomial distribution as a suitable demand distribution for a specific retail inventory management application. We here assume that customer order sizes are described by the Poisson distribution with the random parameter following a gamma distribution. This implies in turn that the negative binomial distribution is obtained by mixing the mean of the Poisson distribution with a gamma distribution. The purpose of this paper is to give an interpretation of the negative binomial demand process by considering the sources of variability in the unknown Poisson parameter. Such variability comes from the unknown demand rate and the unknown lead time interval.

• Journal of Distribution Research
• /
• v.1 no.2
• /
• pp.141-172
• /
• 1996

This study is to investigate global logistics strategies of Korean electronics companies. in terms of service parts. According to the survey, Korean electronics companies were pursuing multi-level global logistics network such as global, continental, national, regional and service center echelon for improving the efficiency of service parts global logistics. Especially there was a tendency of developing new continental distribution centers. And the companies were exploiting efficiency through inventory control by multi-level echelon, demand forecasting by the product life cycle and supply and service lead time management. But there were some insufficient factors for the efficiency of global logistics operation at the construction of worldwide real time logistics information system and pursuit of the efficiency on the whole network including subcontractors. For the future competitive advantage of the Korean electronics companies, the following are suggested: 1) the establishment of arranged logistics channel adjusting each company's global strategy, 2) the construction of worldwide real time logistics information system, 3) the reengineering of all logistics procedures such as order processing, shipping, inventory control, etc., 4) the enhancement of the ratio of the supply from the external companies and the internal manufacturing subsidiaries at each continent, 5) and the pursuit of operational internalization of external subcontractors.