• 제목/요약/키워드: intrinsic stress

검색결과 190건 처리시간 0.021초

WAVY LAP JOINT 응력 해석 (Stress Analysis Of Wavy Lap Joint)

  • 김위대;양승희
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2000년도 추계학술발표대회 논문집
    • /
    • pp.216-219
    • /
    • 2000
  • The adhesive bonded single-lap joint is due to its intrinsic load eccentricity problem, severe peel stresses concentration occur at both end of the joint. In this paper, new lap-joint is designed to avoid the singular peel stress, and to compare the stresses of the middle adhesive layer between the single-lap joint and the wavy-lap joint. Two adherend lay-up, i.e., [90/0/90/0]$_{2s}$ and [0/90/0/90]$_{2s}$ were consider in the study.

  • PDF

The rheological properties of poly(vinylidene fluoride-co-hexafluoropropylene) solutions in dimethyl acetamide

  • Lee, Ki-Hyun;Song, In-Kyu;Kim, Byoung-Chul
    • Korea-Australia Rheology Journal
    • /
    • 제20권4호
    • /
    • pp.213-220
    • /
    • 2008
  • The effects of temperature on the rheological properties of the solutions of poly(vinylidene fluoride-co-hexafluopropylene) (PVDF-HFP) in dimethyl acetamide (DMAc) were investigated in terms of frequency and concentration. The effects of temperature on the intrinsic viscosity of the solutions were discussed. In dynamic rheological measurement, the concentrated solutions showed a little unexpected rheological response; as temperature was increased dynamic viscosity was increased and the solutions exhibited more noticeable Bingham body character over the temperature range, 30 to $70^{\circ}C$. In addition, the solution gave longer relaxation time, lower value of loss tangent and higher value of yield stress at higher temperature and at higher concentration. On the other hand, the dilute solutions revealed that intrinsic viscosity was decreased and its Huggins constant was increased with increasing temperature. These physical parameters suggested that the increase of viscosity with increasing temperature resulted from the localized gelation of PVDF-HFP due to reduced solubility to the solvent.

The Characteristics of Plasma Polymerized Carbon Hardmask Film Prepared by Plasma Deposition Systems with the Variation of Temperature

  • Yang, J.;Ban, W.;Kim, S.;Kim, J.;Park, K.;Hur, G.;Jung, D.;Lee, J.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.381.1-381.1
    • /
    • 2014
  • In this study, we investigated the deposition behavior and the etch resistivity of plasma polymerized carbon hardmask (ppCHM) film with the variation of process temperature. The etch resistivity of deposited ppCHM film was analyzed by thickness measurement before and after direct contact reactive ion etching process. The physical and chemical properties of films were characterized on the Fourier transform infrared (FT-IR) spectroscope, Raman spectroscope, stress gauge, and ellipsometry. The deposition behavior of ppCHM process with the variation of temperature was correlated refractive index (n), extinction coefficient (k), intrinsic stress (MPa), and deposition rate (A/s) with the hydrocarbon concentration, graphite (G) and disordered (D) peak by analyzing the Raman and FT-IR spectrum. From this experiment we knew an optimal deposition condition for structure of carbon hardmask with the higher etch selectivity to oxide. It was shown the density of ppCHM film had 1.6~1.9 g/cm3 and its refractive index was 1.8~1.9 at process temperature, $300{\sim}600^{\circ}C$. The etch selectivity of ppCHM film was shown about 1:4~1:8 to undoped siliconoxide (USG) film (etch rate, 1300 A/min).

  • PDF

D.C. 마그네트론 반응성 스퍼터링법에 의한 Sn-doped ${In_2}{O_3}$ 박막의 밀도와 전기적 특성과의 관계 (Relationship between Film Density and Electrical Properties on D.C. Magnetron Reactive Sputtered Sn-doped ${In_2}{O_3}$Films)

  • 이정일;최시경
    • 한국세라믹학회지
    • /
    • 제37권7호
    • /
    • pp.686-692
    • /
    • 2000
  • Tin-doped In2O3 (ITO) films were fabricated using a d.c. magnetron reactive sputteirng of a In-10 wt% Sn alloy target in an Ar and O2 gas mixture. To understand the behavior of the carrier mobility in ITO films with O2 partial pressure, the resistivity, carrier concentration and mobility, film density, and intrinsic stress in the films were measured with O2 partial pressure. It was found experimentally that the carrier mobility increased rapidly as the film density increased. In the ITO film with the density close to theoretical one, the mean free path was the same as the columnar diameter. This indicated that the mobility in ITO films was strongly influenced by the crystall size. However, in the case where the film density was smaller than a theoretical density, the mean free paths were also smaller the columnar diameter. It was analyzed that the electron scattering at pores and holes within the crystalline was the major obstacle for electron conduction in ITO films. The measurement of intrinsic stress in ITO films also made it clear that the density of ITO films was controlled by the bombardment of oxygen neutrals on the growing film.

  • PDF

Effects of Job Satisfaction Interventions in Reinforcing Intrinsic Motivation for Hospital Nurses: A Meta-Analysis

  • Ko, Jain;Bae, Hye Jin;Kim, Hyun Yong;Kang, Kyung-Ah
    • 한국직업건강간호학회지
    • /
    • 제29권3호
    • /
    • pp.208-218
    • /
    • 2020
  • Purpose: Nurses' job satisfaction corresponds with personal intrinsic value, and is the strongest predicting turnover and job retention intention. This study identified the effectiveness of job satisfaction interventions related to reinforcing intrinsic motivation (JSI-RIM) for hospital nurses. Methods: This study used four core non-Korean databases (Cochrane Library, CHINHL, EMBASE, PubMed), and five Korean databases to search for RCT and NRCT articles published in English and Korean from inception to June 2019. Meta-analysis was performed using the RevMan 5.3.5 program. Results: Thirteen studies featuring 645 hospital nurses were selected for final analysis. A significant large effect was noted on self-efficacy. The effect size on perceived stress and job satisfaction were moderate; however, the effect on resilience outcomes was not significant. Conclusion: This study generated scientific evidence that would facilitate efficient job adaptation for nurses. Additionally, intrinsic factors, including job identity and meaning of work, need to be included in JSI-RIM.

Intrinsic Motivation Factors Based on the Self-Determinant Theory for Regular Breast Cancer Screening

  • Jung, Su Mi;Jo, Heui-Sug
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제15권23호
    • /
    • pp.10101-10106
    • /
    • 2015
  • The purpose of this study was to identify factors of intrinsic motivation that affect regular breast cancer screening and contribute to development of a program for strategies to improve effective breast cancer screening. Subjects were residing in South Korea Gangwon-Province and were female over 40 and under 69 years of age. For the investigation, the Intrinsic Motivation Inventory (IMI) was modified to the situation of cancer screening and was used to survey 905 inhabitants. Multinominal logistic regression analyses were conducted for regular breast cancer screening (RS), one-time breast cancer screening (OS) and non-breast cancer screening (NS). For statistical analysis, IBM SPSS 20.0 was utilized. The determinant factors between RS and NS were "perceived effort and choice" and "stress and strain" - internal motivations related to regular breast cancer screening. Also, determinant factors between RS and OS are "age" and "perceived effort and choice" for internal motivation related to cancer screening. To increase regular screening, strategies that address individual perceived effort and choice are recommended.

Lock-In Thermography를 이용한 노치시험편의 응력해석 및 피로한계치 평가 (Stress Analysis and Fatigue limit Evaluation of Plate with Notch by Lock-In Thermography)

  • 김원태;강기수;최만용;박정학;허용학
    • 비파괴검사학회지
    • /
    • 제26권5호
    • /
    • pp.315-320
    • /
    • 2006
  • 비접촉 비파괴 응력해석기술인 위상잠금 적외선 열화상기술 (Lock-in infrared Thermography)를 이용하여 V-노치와 원형노치를 갖는 평판의 응력분포해석과 피로한계치를 예측하였다. 반복하중을 받는 시험편의 표면온도 분포를 2차원 열화상으로 측정하고 열탄성효과에 의해 노치 선단에서 응력분포를 예측하였으며 재료의 비가역적 히스테리시스에 의해 발생하는 내재 분산에너지를 측정하여 노치시험편의 피로한계치를 예측하였다. 피로한계응력 이내에서 응력측정 결과는 10% 이내의 정확도를 보였으며, 원형노치와 V-노치 시험편의 피로한계치를 164 MPa과 185 MPa로 예측하였다.

복합재료 Wavy-Lap Joint의 3-D 상세 응력 해석 (Refined 3-D Stress Analysis of Composite Wavy-Lap Joint)

  • 신헌;이창성;김승조;김위대
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2001년도 춘계학술발표대회 논문집
    • /
    • pp.168-171
    • /
    • 2001
  • Due to intrinsic load eccentricity, severe peel stress concentration occurs at both ends of the single-lap joint. To avoid load eccentricity as well as the singular tensile peel stress in the joint interface, composite wavy-lap joint is proposed. In this paper, refined 3-D stress analysis of wavy-lap joint is performed by finite element method using parallel mutifrontal solver. Analysis results show that the singular tensile peel stress concentration is totally avoided in wavy-lap joint, and that loads are more evenly transferred over the length of the joint. Therefore, the strength of wavy-lap joint is significantly higher than that of conventional single-lap joint. And it is believed that even higher strengths can be obtained by optimizing the new design configuration.

  • PDF

IN SITU STRESS MEASUREMENTS OF Co-BASED MULTILAYER FILMS

  • Kim, Young-Suk;Shin, Sung-Chul
    • 한국자기학회지
    • /
    • 제5권5호
    • /
    • pp.470-473
    • /
    • 1995
  • We have constructed an apparatus for in sity measurement of stress of the film prepared by sputtering using an optical noncontact displacement detector. A Change of the gap distance between the detector and the substrate, caused by stress of a deposited film, was detected by a corresponding change of the reflectivity. The sensitivity of the displacement detector was $5.9\;{\mu}V/{\AA}$ and thus, it was turned out to be good enough to detect stress caused by deposition of a monoatomic layer. The apparatus was applied to in situ stress measurements of Co/X(X=Pd or Pt) multilayer thin films prepared on the glass substrates by dc magnetron sputtering. At the very beginning of the deposition, both Co and X sublayers have subjected to their own intrinsic stresses. However, when the film was thicker than about $100{\AA}$, constant tensile stress in the Co sublayer and compressive stress in the X sublayer were observed, which is believed to be related to a lattice mismatch between the matching planes of Co and X.

  • PDF

Analysis of residual thermal stress in an aluminosilicate core and silica cladding optical fiber preform

  • Shin, Woo-Jin;K. Oh
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
    • /
    • pp.214-215
    • /
    • 2000
  • As silica based optical fibers and preforms are processed at a high temperature, residual stresses are bulit in the strucure when cooled down to the room temperature. The magnitude of the residual stress depends on the difference in the thermal expansion coefficients between core and cladding glass as well as on the temperature difference. Residual stress distribution determines the intrinsic strength and could affect the long term reliability of optical fibers. And furthermore, stress can introduces anisotropy into optical fibers by photoelastic effects. The analysis of thermal stress has been intensively studied for multimode fibers$^{(1)}$ and the authors and co-wokers recently reported the stress distribution in a depressed inner cladding structure$^{(2)}$ . The compositions of the glass in the previous studies, however, have been restricted to conventional glass formers, such as GeO2, B2O3, P2O5, Fluorine. (omitted)

  • PDF