The rheological properties of poly(vinylidene fluoride-co-hexafluoropropylene) solutions in dimethyl acetamide

  • Lee, Ki-Hyun (Division of Applied Chemical and Bio Engineering, Hanyang University) ;
  • Song, In-Kyu (Division of Applied Chemical and Bio Engineering, Hanyang University) ;
  • Kim, Byoung-Chul (Division of Applied Chemical and Bio Engineering, Hanyang University)
  • Published : 2008.12.31

Abstract

The effects of temperature on the rheological properties of the solutions of poly(vinylidene fluoride-co-hexafluopropylene) (PVDF-HFP) in dimethyl acetamide (DMAc) were investigated in terms of frequency and concentration. The effects of temperature on the intrinsic viscosity of the solutions were discussed. In dynamic rheological measurement, the concentrated solutions showed a little unexpected rheological response; as temperature was increased dynamic viscosity was increased and the solutions exhibited more noticeable Bingham body character over the temperature range, 30 to $70^{\circ}C$. In addition, the solution gave longer relaxation time, lower value of loss tangent and higher value of yield stress at higher temperature and at higher concentration. On the other hand, the dilute solutions revealed that intrinsic viscosity was decreased and its Huggins constant was increased with increasing temperature. These physical parameters suggested that the increase of viscosity with increasing temperature resulted from the localized gelation of PVDF-HFP due to reduced solubility to the solvent.

Keywords

References

  1. Choi, J. H., S. Ko, B. C. Kim, J. Blackwell and W. S. Lyoo, 2001, Phase behavior and physical gelation of high molecular weight syndiotactic poly(vinyl alcohol) solution, Macromolecules 34(9), 2964-2972 https://doi.org/10.1021/ma001710s
  2. Dargaville, T. R., G. A. George, D. J. T. Hill and A. K. Whittaker, 2003, High energy radiation grafting of fluoropolymers, Progress in Polymer Science 28(9), 1355-1376 https://doi.org/10.1016/S0079-6700(03)00047-9
  3. Hong, S. M., B. C. Kim, S. S. Hwang and K. U. Kim, 1993, Rheological and physical properties of polyarylate/LCP blend systems, Polymer Engineering and Science 33(10), 630-639 https://doi.org/10.1002/pen.760331008
  4. Kim, B. C., W. S. Lyoo and W. S. Ha, 2000, Realtime characterization of in situ molecular alignment during the saponification process of polyvinyl pivalate, Polymer Journal 32(2), 159-163 https://doi.org/10.1295/polymj.32.159
  5. Lee, E. J., N. H. Kim, K. S. Dan and B. C. Kim, 2004, Rheological properties of solutions of general-purpose poly(vinyl alcohol) in dimethyl sulfoxide, Journal of Polymer Science Part B: Polymer Physics 42(8), 1451-1456 https://doi.org/10.1002/polb.20017
  6. Lee, E. J., K. S. Dan and B. C. Kim, 2006, Rheological characterization of shear-induced structural formation in the solutions of poly(vinyl alcohol) in dimethyl sulfoxide, Journal of Applied Polymer Science 101, 465-471 https://doi.org/10.1002/app.23256
  7. Lyoo, W. S., B. C. Kim and W. S. Ha, 1998, Spontaneous orientation of molecules during saponification of poly(vinyl pivalate), Polymer Journal 30(5), 424-430 https://doi.org/10.1295/polymj.30.424
  8. Lyoo, W. S., J. H. Choi, B. C. Kim and J. Blackwell, 2001, Role of degree of saponification in the shear-induced molecular orientation of syndiotacticity-rich ultrahigh molecular weight poly(vinyl alcohol), Macromolecules 34(12), 3982-3987 https://doi.org/10.1021/ma001338g
  9. Michot, T., A. Nishimoto and M. Watanabe, 2000, Electrochemical properties of polymer gel electrolytes based on poly(vinylidene fluoride) copolymer and homopolymer, Electrochimica Acta 45, 1347-1360 https://doi.org/10.1016/S0013-4686(99)00343-6
  10. Nicotera, I., C. Oliviero, G. Ranieri, A. Spadafora, M. Castriota and E. Cazzanelli, 2002, Temperature evolution of thermoreversible polymer gel electrolytes $LiClO_4/ethylene$ carbonate/ poly(acrylonitrile), Journal of Chemical Physics 117, 7373-7380 https://doi.org/10.1063/1.1507773
  11. Park, I. H., J. E. Yoon, Y. C. Kim, L. Yun and S. C. Lee, 2004, Laser light scattering study on the structure of a poly (vinylidene fluoride) aggregate in the dilute concentration state, Macromolecules 37(16), 6170-6176 https://doi.org/10.1021/ma030534v
  12. Ramakrishna, S., K. Jujihara, W. E. Teo, Z. Ma and R. Ranaseshan, 2006, Electrospun nanofibers: solving global issues, Materialstoday 9(3), 40-50
  13. Wang, D., K. Li and W. K. Teo, 1999, Preparation and characterization of polyvinylidene fluoride (PVDF) hollow fiber membranes, Journal of Membrane Science 163(2), 211-220 https://doi.org/10.1016/S0376-7388(99)00181-7
  14. Wissburn, K. F. and A. C. Griffin, 1982, Rheology of a thermotropic polyester in the nematic and isotropic states, Journal of Polymer Science: Polymer Physics Edition 20, 1835-1845 https://doi.org/10.1002/pol.1982.180201007
  15. Zhang, Q. and E. L. Cussler, 1985, Microporous hollow fibers for gas absorption. I. mass transfer in the liquid, Journal of Membrane Science 23(3), 321-332 https://doi.org/10.1016/S0376-7388(00)83149-X