• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.91-93
• /
• 2003

A comprehensive numerical study is carried out to investigate for the understanding of the flow evolution and flame development in a supersonic combustor with normal injection of ncumally injecting hydrogen in airsupersonic flows. The formulation treats the complete conservation equations of mass, momentum, energy, and species concentration for a multi-component chemically reacting system. For the numerical simulation of supersonic combustion, multi-species Navier-Stokes equations and detailed chemistry of H2-Air is considered. It also accommodates a finite-rate chemical kinetics mechanism of hydrogen-air combustion GRI-Mech. 2.11[1], which consists of nine species and twenty-five reaction steps. Turbulence closure is achieved by means of a k-two-equation model (2). The governing equations are spatially discretized using a finite-volume approach, and temporally integrated by means of a second-order accurate implicit scheme (3-5).The supersonic combustor consists of a flat channel of 10 cm height and a fuel-injection slit of 0.1 cm width located at 10 cm downstream of the inlet. A cavity of 5 cm height and 20 cm width is installed at 15 cm downstream of the injection slit. A total of 936160 grids are used for the main-combustor flow passage, and 159161 grids for the cavity. The grids are clustered in the flow direction near the fuel injector and cavity, as well as in the vertical direction near the bottom wall. The no-slip and adiabatic conditions are assumed throughout the entire wall boundary. As a specific example, the inflow Mach number is assumed to be 3, and the temperature and pressure are 600 K and 0.1 MPa, respectively. Gaseous hydrogen at a temperature of 151.5 K is injected normal to the wall from a choked injector.A series of calculations were carried out by varying the fuel injection pressure from 0.5 to 1.5MPa. This amounts to changing the fuel mass flow rate or the overall equivalence ratio for different operating regimes. Figure 1 shows the instantaneous temperature fields in the supersonic combustor at four different conditions. The dark blue region represents the hot burned gases. At the fuel injection pressure of 0.5 MPa, the flame is stably anchored, but the flow field exhibits a high-amplitude oscillation. At the fuel injection pressure of 1.0 MPa, the Mach reflection occurs ahead of the injector. The interaction between the incoming air and the injection flow becomes much more complex, and the fuel/air mixing is strongly enhanced. The Mach reflection oscillates and results in a strong fluctuation in the combustor wall pressure. At the fuel injection pressure of 1.5MPa, the flow inside the combustor becomes nearly choked and the Mach reflection is displaced forward. The leading shock wave moves slowly toward the inlet, and eventually causes the combustor-upstart due to the thermal choking. The cavity appears to play a secondary role in driving the flow unsteadiness, in spite of its influence on the fuel/air mixing and flame evolution. Further investigation is necessary on this issue. The present study features detailed resolution of the flow and flame dynamics in the combustor, which was not typically available in most of the previous works. In particular, the oscillatory flow characteristics are captured at a scale sufficient to identify the underlying physical mechanisms. Much of the flow unsteadiness is not related to the cavity, but rather to the intrinsic unsteadiness in the flowfield, as also shown experimentally by Ben-Yakar et al. [6], The interactions between the unsteady flow and flame evolution may cause a large excursion of flow oscillation. The work appears to be the first of its kind in the numerical study of combustion oscillations in a supersonic combustor, although a similar phenomenon was previously reported experimentally. A more comprehensive discussion will be given in the final paper presented at the colloquium.

• 공업화학
• /
• 제20권3호
• /
• pp.322-328
• /
• 2009

Octamethylcyclotetrasiloxane (OMCTS)을 에멀젼 상태에서 초음파를 조사하여 polydimethylsiloxane (PDMS)을 중합하였다. 중합에 활용된 초음파 반응기는 주파수가 20 KHz의 horn 유형과 40 KHz의 bath 유형이었으며, horn과 bath를 혼용한 경우의 중합 공정의 특성도 평가해 보았다. 고려된 주요 변수들은 반응 온도와 초음파 조사 시간 이었으며, 중합물에 대하여 각 시료의 고유 점도와 전환율 측정을 통하여 각 중합공정의 효율성과 특성을 조사하고, 최적의 공정 조건을 도출해 보고자 하였다. Horn 유형의 반응기에서는 수 분 이내에 80% 이상의 전환율이 달성되고 높은 점도의 PDMS를 얻을 수 있었으나, 조사 시간에 따라 전환율과 점도는 최대값을 보인 이후에 감소하는 경향을 나타내었다. 초음파의 강도가 상대적으로 약하게 유지되는 bath 유형의 반응기에서는 1 h 이상의 조사가 필요하였으며, horn 유형과 달리 전환율과 점도가 조사 시간에 따라 지속적으로 증가하는 경향이 지배적이었다. Horn유형과 bath유형을 조합한 혼합형 반응기에서는 다른 반응기와는 매우 다른 결과들이 나타났으며, 각 반응기의 특성은 전산 모사를 이용한 반응기 내의 음파 해석을 바탕으로 설명되었다.

• 천문학회지
• /
• 제50권6호
• /
• pp.167-178
• /
• 2017

We present a study of the inexplicit connection between radio jet activity and ${\gamma}$-ray emission of BL Lacertae (BL Lac; 2200+420). We analyze the long-term millimeter activity of BL Lac via interferometric observations with the Korean VLBI Network (KVN) obtained at 22, 43, 86, and 129 GHz simultaneously over three years (from January 2013 to March 2016); during this time, two ${\gamma}$-ray outbursts (in November 2013 and March 2015) can be seen in ${\gamma}$-ray light curves obtained from Fermi observations. The KVN radio core is optically thick at least up to 86 GHz; there is indication that it might be optically thin at higher frequencies. To first order, the radio light curves decay exponentially over the time span covered by our observations, with decay timescales of $411{\pm}85$ days, $352{\pm}79$ days, $310{\pm}57$ days, and $283{\pm}55$ days at 22, 43, 86, and 129 GHz, respectively. Assuming synchrotron cooling, a cooling time of around one year is consistent with magnetic field strengths $B{\sim}2{\mu}T$ and electron Lorentz factors ${\gamma}$ ~ 10 000. Taking into account that our formal measurement errors include intrinsic variability and thus over-estimate the statistical uncertainties, we find that the decay timescale ${\tau}$ scales with frequency ${\nu}$ like ${\tau}{\propto}{\nu}^{-0.2}$. This relation is much shallower than the one expected from opacity effects (core shift), but in agreement with the (sub-)mm radio core being a standing recollimation shock. We do not find convincing radio flux counterparts to the ${\gamma}$-ray outbursts. The spectral evolution is consistent with the 'generalized shock model' of Valtaoja et al. (1992). A temporary increase in the core opacity and the emergence of a knot around the time of the second ${\gamma}$-ray event indicate that this ${\gamma}$-ray outburst might be an 'orphan' flare powered by the 'ring of fire' mechanism.

• 디자인학연구
• /
• 제21권
• /
• pp.109-121
• /
• 1997

The poster in America was considered merely a means of advertising until the late 1880s, and was not thought to have any intrinsic value. During the 1890s, the poster in America came into its own as a medium of artistic expression, and it was recognized anew as an medium of advertising. The production and circulation of posters became active, and it won the popularity of poster collectors. But the American poster renaissance flourished for a few brief years in the 1890s. In this thesis, I paid attention that the art poster in America was mainly a product of the publishing trade, and that it's rise and fall was connected with the circumstances of the publishing business. In chapterII, I discussed the growth of publishing business and the phenomenon of poster craze, and tried to figure out the characteristic of American poster design in 1890s. The American poster boom was formally initiated in Spring 1893, when Edward Penfield published the first of his monthly designs advertising Harper's Magazine. Penfield created a native American tradition of realism in the series of Harper's posters, his figures are realistic though anonymous, and are drawn without distortion or grotesquery, and details are reduced to essentials but not eliminated. In chapterIII, I discussed the change in book cover design in the 1890s. The rapid evolution of book and magazine covers was largely a reaction to the poster craze. Most magazines were issued with the same standard covers month after month at that time. In 1894, when William Bradley was asked to design a standard cover for the Inland Printer, he convinced the publishers to change the cover with every issue instead of designing one permanent cover. With the poster craze at its height, posters became big business, but still they were not very successful as advertisements. Because collectors of the 1890s were more interested in acquiring posters than in buying books. Significantly, this was also the moment when poster like designs began to appear on the covers of books and mass magazines. Publishers took notice of an idea. If the eye-catching design was on the cover itself rather than on a separate poster, the customer who wished to acquire the design would be obliged to buy the magazine. So there was no distinction stylistically between the posters of the 1890s and the magazine covers of the early 1900s. At the same time, the artistic poster was beginning to decline. While the most typical advertisements of the 1890s were the book and magazine posters of Bradley and Penfield, after 1900 advertisements for manufacturers' products played an increasingly prominent role. They would never again assume the leading role that they had played in the 1890s.

• 디자인학연구
• /
• 제13권1호
• /
• pp.103-110
• /
• 2000

한글은 동아시아 한자문화권 속에서 태어났다. 우리의 글자문화는 서양 글자 문화는 엄연히 다른 전통이 있었다. 동양에서 글자란 영물이자 주술이었으며, 존엄과 신비 그리고 제의가 함유된 경외의 대상이었다. 동양에서는 글씨 그 자체의 엄연한 가치를 인정하는 문화적 전통이 있었던 것이다. 이러한 글자관 세계속에서 완벽한 소리글자로서 한글은 태어났다. 그러나 한글의 특성은 뜻글자로서의 한자적 배경과 사뭇 다르며 독특하다. 한글은 소리글자임에도 불구하고 한자적 이미지의 고향을 강하게 지니고 있다. 이것은 라틴 알파벳이 그 진화의 오랜 여정 속에서 이미지의 고향을 잃어버린 것과 대조되는 부분이며, 소리글자로서의 한글이 이미지의 속성을 함께 가지고 있는 것은 한글의 특성이라 할 수 있다. 다시 말해 한글 형태는 조합 방식에서 한자와 같은 속성을 가지고 있으면서, 소리글자로서의 특성은 라틴 알파벳에 가깝다. 한글은 곧 시간적으로 한자 문화에 바탕을 둔 시각 이미지 글자의 배경으로서의 기억을 생생히 가지고 있고, 또 기능적으로는 매우 발달된 형태의 소리글자로서의 글자의 두 가지 속성을 모두 한몸에 지니고 있는 것이 특징이다. 이러한 한글의 특징은 이미지 시대에 살고 있는 우리에게 바로 우리 시각문화의 존재 의미를 일깨워주는 부분이라 하겠다. 곧 세계 글자문화 속에서 돋보이는 이러한 한글 타이포그라피의 정체성이야 말로 바로 우리 시각문화의 본질이 될 것이다.

• Asia pacific journal of information systems
• /
• 제23권2호
• /
• pp.67-86
• /
• 2013

This study first provides a stylized model that captures the essential features of the SC (Social Commerce) business and the competition process. The model focuses on the relationship between key decision issues such as marketing inputs and market value. As more SCs join the industry, they are inevitably faced with fierce competition, which may lead to sharp increase in the total marketing and advertising expenditure. This type of competition may lead the industry away from its optimal development path, and at worst, toward a disruption of the entire industry ecosystem. Such being the case, another goal of this study is to examine the possibility that the ToC (Tragedy of the Commons) may occur in the SC industry. We build game models, each of which assumes homogeneity and heterogeneity of SC providers, respectively, and derive explicit equilibrium solutions from both models. Our basic analysis presents Nash equilibria in both models and shows that SC providers are inevitably faced with fierce competition, which may lead to sharp increase in the total marketing expenses. We also compare the game outcomes with one with a hypothetical social planner who determines the total marketing level that optimizes the entire market value. Then, ToC can be defined to describe the situation where the total marketing efforts exceed the socially optimal level of marketing efforts. In both models, we examine the possibility of the ecosystem disruption and specify the conditions under which ToC may occur. However, the chance of avoiding ToC is higher with heterogeneous players than with homogeneous players. To supplement our analytical results, we develop a simulation model which incorporates a market dynamics based on the gap between actual marketing efforts and socially optimal marketing level. Simulation experiments present some lessons and insights which also confirm out findings from equilibrium analysis. For example, heterogeneity in SC providers alleviates the severity of ToC and makes it faster for survivors to escape from the ToC trap. As a result, the degree of industrial concentration tends to increase, which also explains the 'rich-get-richer' phenomenon observed in some empirical studies on the SC industry. Lastly, based on our analytical and experimental results, we come up with some measures to avoid ToC and overcome the shortcomings intrinsic to the current business model. And further discussions provide strategic implications and policy directions to overcome the possible trap of ToC in this ecosystem, and eventually help the industry to sustainably develop itself toward the next level. To name a few examples of policy measures, regulations on the marketing activities so that the overall marketing expenses cannot go beyond the socially optimal level; institutional guidelines and rules to straightening up the distortions in the way that SC providers view the marketing costs (the current marketing costs are underestimated, thereby encouraging SC providers to increase marketing expenditure); and so on.

• Asia pacific journal of information systems
• /
• 제24권4호
• /
• pp.577-610
• /
• 2014

Although service innovation is not a new concept, innovation research in general tends to focus on technological innovation by manufacturing firms. With this view, innovation studies focus on product(e.g., goods) and process(e.g., product systems) innovation, ignoring service innovation and its inherent opportunities. Since major economy has been transformed to service economy, service innovation is considered a new effective way to sustain and gain a competitive advantage. Service innovation is no longer regarded merely as a side activity to product innovation; it has become a main research topic in its own right, accompanied by an increasing focus on services. While the number of service innovation studies has increased dramatically in the past 30 years in international research, few studies have been performed in domestic studies because domestic service innovation research began from the middle of 2000. In addition, there are no comprehensive literature reviews describing the evolution of service innovation research in both international and domestic studies because of the heterogeneities of service industry and multidiscipline characteristics of service innovation studies. To bridge this research gap, the purpose of this paper is to perform an extensive literature review and synthesis to enable a critical review of extant research on service innovation and trace its evolution, which will establish a foundation for further studies. By reviewing 169 articles (136 international papers; 33 domestic papers) published between 2000 and 2014 (in past 15 years), primarily in leading service, innovation and management information systems journals, this study analyzes the progression of service innovation research according to the four aspects such as number of studies, topics, methodologies and target industries. Overall, the view of service innovation has evolved, from a complement of traditional product innovation to a multidimensional, all-encompassing concept that entails several functions, both within and outside the firms. The results showed that domestic research still stays at the formation phase of service innovation studies although international research is in the maturity or multidimensional phase. We found increasing recent activities pertaining to service innovation, resulting from the increasing interest in services innovation across various industries and the links of new topics to the service innovation concept in both international and domestic studies. However, the main focus of service innovation research showed a different propensity between international and domestic studies: the former mainly focuses on a much more diversified pattern, emphasizing the linkages between service innovation and business strategy while the latter mainly focuses on the service innovation process(system) and service design. In addition, there are many case studies in domestic studies while many empirical studies in international studies. Domestic studies should increases the understanding of the interplay between service innovation and product innovation within manufacturing firms. Furthermore, rather than focusing on intrinsic distinctions between service innovation and product innovation, researchers should strive to develop and conceptualize service innovation in domestics studies. The present research also provides useful implications for practitioners. First, this study contributes to expand the current understanding of service innovation research by performing an extensive literature review. Second, tracing and comparing the progression and trends of service innovation research between international and domestic studies, this study showed the similarities and differences between them, which provide practical guidance on future research directions and research agenda. Third, this study performed literature review establishing the analysis system in the initial stage and using them to analyze articles, which is leading to explain the research review of service innovation more systematically and objectively. Finally, this study suggests the domestic researchers their future interests and topics of service innovation research.

• 광물과 암석
• /
• 제34권3호
• /
• pp.157-167
• /
• 2021

납(lead; Pb)은 지구 형성 초기의 원시 맨틀(primitive mantle)에서부터 현재 지구로의 진화 과정 이해에 중요한 정보를 제공하는 미량 원소 중 하나이다. 납은 지구 내부 및 지각에서 다양한 화성 과정에 수반하는 규산염 광물과 용융체 내에 차별적으로 분배된다. 원소 분배 계수 변화는 규산염 용융체 구조와 밀접한 관련이 있을 것으로 알려져 있다. 따라서 본 연구의 목적은 납이 포함된 규산염 용융체의 자세한 구조를 밝히고, 조성에 따라 변화하는 구조와 특성, 특히 규산염 광물과 용융체 간의 원소 분배 계수와의 관계를 제시하는 것이다. 본 연구에서는 고상 NMR 분광분석을 수행하여 비정질 Pb-Na 규산염의 자세한 원자 구조를 확인하였다. 자연계 마그마 용융체의 모델 시스템으로 납이 포함된 비정질 유리 시료[(PbO)_x(Na₂O)_1-x]·SiO₂를 소듐과 납의 단종 Na₂SiO₃에서 PbSiO₃까지 다양한 조성의 비정질을 합성하였으며(x=0, 0.25, 0.33, 0.50, 0.67, 0.86, 1) 납의 함량에 따른 규소 주변 원자 환경의 변화를 확인할 수 있는 ²⁹Si MAS NMR 분광분석을 수행하였다. ²⁹Si MAS NMR 결과 납 함량에 따라 피크의 폭이 넓어지고 피크 최대값의 위치는 -76.2, -77.8, -80.3, -81.5, -84.6, -87.7 ppm으로 이동하였다. 규소와 결합된 연결 산소의 양인 Qⁿ 환경 변화를 정량적으로 분리하기 위하여 ²⁹Si NMR 스펙트럼에 대한 시뮬레이션을 수행하였다. 시뮬레이션은 조성에 따라 NBO/T로 나타낸 중합도가 일정하면서 Qⁿ 환경의 화학적 차폐 이동을 가정한 경우 가우시안 함수의 조합으로 진행하였다. 그 결과 규소 주변 원자 환경 변화에 기인한 화학적 차폐의 이동이 시사된다. Na₂SiO₃의 경우 Q²가 지배적으로 존재하며 Q¹ 및 Q³가 비슷한 비율로 존재하였으나 소듐 대신 납이 포함되면서 Q²가 감소하고 Q¹ 및 Q³가 증가하면서 Qⁿ 환경의 불균화가 증가하였다. ²⁹Si NMR 스펙트럼에 대한 시뮬레이션 결과는 납을 포함한 비정질 규산염에서 조성에 따른 배열 무질서도 및 위상 무질서도 증가를 지시한다. 본 결과로부터 평균 양이온 세기(average cation field strengths)에 따른 불균화 상수(disproportionation factor)의 변화를 정량화하였다. 무질서도의 증가와 비정질의 구조 변화가 납을 포함한 미량 원소의 분배 계수를 감소시킬 것으로 예상된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.107-108
• /
• 2008

The spectacular development of AMLCDs, been made possible by a-Si:H technology, still faces two major drawbacks due to the intrinsic structure of a-Si:H, namely a low mobility and most important a shift of the transfer characteristics of the TFTs when submitted to bias stress. This has lead to strong research in the crystallization of a-Si:H films by laser and furnace annealing to produce polycrystalline silicon TFTs. While these devices show improved mobility and stability, they suffer from uniformity over large areas and increased cost. In the last decade we have focused on microcrystalline silicon (${\mu}c$-Si:H) for bottom gate TFTs, which can hopefully meet all the requirements for mass production of large area AMOLED displays [1,2]. In this presentation we will focus on the transfer of a deposition process based on the use of $SiF_4$-Ar-$H_2$ mixtures from a small area research laboratory reactor into an industrial gen 1 AKT reactor. We will first discuss on the optimization of the process conditions leading to fully crystallized films without any amorphous incubation layer, suitable for bottom gate TFTS, as well as on the use of plasma diagnostics to increase the deposition rate up to 0.5 nm/s [3]. The use of silicon nanocrystals appears as an elegant way to circumvent the opposite requirements of a high deposition rate and a fully crystallized interface [4]. The optimized process conditions are transferred to large area substrates in an industrial environment, on which some process adjustment was required to reproduce the material properties achieved in the laboratory scale reactor. For optimized process conditions, the homogeneity of the optical and electronic properties of the ${\mu}c$-Si:H films deposited on $300{\times}400\;mm$ substrates was checked by a set of complementary techniques. Spectroscopic ellipsometry, Raman spectroscopy, dark conductivity, time resolved microwave conductivity and hydrogen evolution measurements allowed demonstrating an excellent homogeneity in the structure and transport properties of the films. On the basis of these results, optimized process conditions were applied to TFTs, for which both bottom gate and top gate structures were studied aiming to achieve characteristics suitable for driving AMOLED displays. Results on the homogeneity of the TFT characteristics over the large area substrates and stability will be presented, as well as their application as a backplane for an AMOLED display.