• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.927-930
• /
• 2002

The HFPD measurement method is a technique to analyze aging state of high voltage insulation materials and detect higher frequency signals than conventional PD measurement method therefore it takes less noise effect and could execute active line measurement. It is possible to analyze main discharge phenomena and obtain access to aging progress occurred in insulation materials through accumulation of HFPD signals during determined interval and expression of fractal dimension using statistical process of accumulated signals. In this study, the statistical parameters (skewness & kurtosis) and fractal dimensions are changed by discharge patterns that is shown up different characteristics with applied voltages and times.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.113-116
• /
• 2003

Mobile communication network because information through radio channel is passed, information may be eavesdropped and need information security countermeasure in communication network dimension for safe information exchange because there is possibility that is manufactured. This paper used Public Key Cryptography for protection and authentication connected with user authentication. Use public key and private key that is asymmetry encryption key to quote that is used at encryption, decryption of Public key. Encrypt IMSI and authentication message that is transmitted MS, VLR and HLR interval to public key, wish to embody transmitted authentication protocol safety.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.2
• /
• pp.91-97
• /
• 2003

In rigid-plastic finite element method, there is a heavy computation time and convergence problem. In this study, revised rigid-plastic finite element method Will be introduced. This method is the way that restrict the convergence interval. In result, convergence problem and computation time due to large non-linearity in the existing numerical analysis method were no longer a critical problem. It is expected that various results from the numerical analysis will give very useful information for the design of tools in sheet metal forming process.

• Journal of Korea Multimedia Society
• /
• v.17 no.4
• /
• pp.433-440
• /
• 2014

Wireless communication offers the flexibility to the node movement at the spatial dimension more than the wire communication not only in IP architecture but also in Content-Centric Networking. Although it gives such advantage, the intra-domain movement of a node especially the data source node affects the communication to the access point node which in the end affects the acceptance ratio of the client node that requests the data packets from the data source node. In this paper, we use time-division access method to maintain the acceptance ratio of the client node as the effect of the intra-domain data source node movement in Content-Centric Networking. The simulation result shows that the acceptance ratio of the client node can be maintained using the time-division access method as long as the interval access time is less than the coherence time.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.610-615
• /
• 2003

This experiment has been carried out to find the structure of turbulent boundary layer with instantaneous velocity fields obtained in stream-wall-normal planes using a stereo-PIV (Particle Image Velocimetry) method. And it has been measured perpendicular plane and horizontal plane with hairpin vortex structure by Reynolds number change and made third dimension shape for section of horizontal plane through stereo-PIV. In the outer layer hairpin vortices occur in streamwise-aligned packets that propagate with small velocity dispersion. A streaky structure is composed of counter-rotating vortex. According as y+ increases, streaky structure's interval space decrease, and it shows that hairpin shape of prior research is vertified. The objective of the present research is to gain a better understanding of coherent structures in the outer of wall turbulence by experimentally examining coherent structures.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.197-198
• /
• 1998

We tested the capability of Pointwise Correlation Dimension(PD2), Approximate Entropy (ApEn) and LZ complexity, as alternative measures of a biological signal. For this purpose, we analyzed standard data and a healthy child's 24-hour heart rate variability. Our conclusion is as follows. First, PD2, ApEn and LZ complexity can be used for discerning chaotic attractor, white noise, and periodic signal. Second, these measures show different characteristics on day and night. Third, these measures can be used for detecting time-varying characteristics of biological signals.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.46-46
• /
• 2004

디지털 측정장치의 발달에 따라 센서에서 출력되는 아날로그 신호를 디지털 신호로 변환하고, 이를 바탕으로 측정결과를 제시하는 경우가 많다. 그러나 아날로그 신호의 디지털화 과정에서는 정보의 유실이 생길 수밖에 없고, 또한 측정 헤드의 dimension 과 sampling interval 등과 같은 측정조건은 측정결과의 신뢰성에 많은 문제를 야기 시킨다. 본 연구에서는 새로운 측정방법을 바탕으로 시장-분산곡선과 Correlogram 법을 이용하여 그 특성을 해석하고, 데이터 샘플링 시 측정조건과 시료내의 변동성이 측정결과인 평균 굵기 및 굵기의 총분산에 미치는 영향을 찾아 보았다.(중략)

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.4
• /
• pp.516-530
• /
• 1999

The current clinical technique for occlusal vertical dimension recording is based on marking the skin reference points on the patient's face and measuring between these points using caliper-like device. And it is difficult to achieve reliable measurements by this technique because of movable soft tissue. The purpose of this study is to reveal the stability of skin reference points by comparing the relative movement between extra-oral skin reference points and intra-oral reference points using X-ray fluoroscope. 10 test subjects were divided into 2 groups : Group I (natural dentition) and Group II (denture-wearer whose vertical dimension was lost) and Group III consists of identical test subjects to Group II with their upper denture removed and record base inserted. Attaching the 3 mm diameter steel ball to nose tip, lower lip, chin and to existing denture (or record base), fluoroscopic examination and recording were taken during 2 jaw opening and closing movements. After subsequent digitization using personal computer, 1219 still pictures with 0.1 second interval were made. Using the 2 dimensional graphic software, measurements between reference points were executed. Dividing the entire jaw movement into 3 ranges (total, 1st half opening, 2nd half opening), rate of movement and relative movement between extra-oral and intra-oral reference points were calculated and statistically analyzed. The results of this study are as follows. 1 Within the same experimental group, no statistical difference was found in the stability of skin reference between lower lip point and chin point during total range of jaw opening and closing movement (p>.05) 2. In the first half range of jaw opening, statistical difference was found between Group I (natural dentition) and Group II (denture wearer) (p<.05) Group I has greater skin reference stability than Group II. 3. In the first half range of jaw opening, statistical difference was found between Group I and Group III (record base wearer) (p<.05). Group I has greater skin reference stability than Group III. 4. In the first half range of jaw opening, no statistical difference was found in the stability of skin reference between Group II and Group III (p>.05). 5. In the second half range of jaw opening, no statistical difference was found in the stability of skin reference between any experimental groups (p>.05). 6. In patients with their occlusal vertical dimension lost, employing other measuring references rather than skin is recommended because of low stability.

• Journal of the Korean Home Economics Association
• /
• v.46 no.9
• /
• pp.99-112
• /
• 2008

The increasing rate of obesity in school aged children has become a conspicuous social phenomenon in Korea. This has been linked to greater economic growth, increasingly westernized dietary habits, and a consumer driven society. Given that obesity can lead to social exclusion or unfavorable attention by other students in a school setting, the design of plus-size garments have become important for effective appearance management skills. This research aimed to establish a somatotype database for obese school boys, aged 10 to 12, in order to develop a sizing system for plus-size upper garments. In order to measure somatotype of average and obese school boys, five categories were recorded; height, obesity, length of trunk, thickness of neck and chest. For obese boys, subcutaneous fat thickness and position of B.P/shoulder point factors were recorded. Obesity factor was subdivided into overall and specific ones, and while the deviation of obese body types was severe compared to the average type. Obese body type showed significantly higher measurements in width, girth, thickness. This is linked to the fact that the frequency ratio of obesity increases with age. Stature and chest were chosen as control dimensions for boys' wear. As crosstabulation of stature(5cm interval) and chest girth(2, 3 and 4cm), and stature(5cm interval)/chest girth(3cm interval) sizing system showed, the most effective cover ratio and adaptability to the data distribution $25{\sim}75$ quartile. Based on the findings, 10 sizes were formulated for average body type, while 18 sizes were formulated for obese type, whose size cover ratios were 48% and 62.9%, respectively. The primary ranges of stature were $145cm{\sim}150cm$, while those of chest girth were $79{\sim}82cm$. Each size was declared as "chest-somatotype{A(average)/O(obesity)-stature". This study proposed a plus-size upper garment sizing systems for obese boys, accompanied with reference measurements for suit, casual wear and underwear. The finding showed that the two systems were totally separate and not overlapping, meaning that plus-size sizing system is essential for obese school boys. The obesity type system had more size and wider range specs.

• Asian Oncology Nursing
• /
• v.1 no.1
• /
• pp.32-43
• /
• 2001

High risk breast cancer patients receive aggressive treatments such as APBSCT in order to prevent the recurrence. These treatments take a long time and decrease the quality of life of patients as a result. The purpose of this study is to examine when the changes of quality of life are dramatic in general and in specific dimension. This is a time series study of two types of treatment groups, in which 15 patients were treated by chemotherapy only and nine patients by auto-peripheral blood stem cell transplantation. Subjects were in this study were stage III and above of breast cancer. Data were collected from April 1999 to April 2000 with the 3 month-interval starting after 3rd cycle of chemotherapy. Data were collected 3 times ; treatment period, treatment finishing period and 3 months later after the treatment. Ferrell's QOL instrument was used which had been developed for the breast cancer patients in 1989. Repeated Measure ANOVA was used to examine differences of quality of life at 3 points of time respectively. As a result, average age was 43.29 years (4.38yrs) and the number of married person was 22(91.7%). Scores of quality of life were 5.45 at 1st period after 3rd cycle of chemotherapy, 5.17 after treatment, 5.10 at 3 months later after treatment and difference of quality of life was decreased according to period of treatment (P=.085). Only the psychological dimension of the quality of life showed the significant difference (P=.045). Two different treatment groups showed a difference of quality of life at 3 month later after treatment. In conclusions, high risk breast cancer patients showed the decreased quality of life related to treatment up to 3 months later of treatment. Subjects who received APBSCT returned to the normal quality of life more rapidly than those who received chemotherapy. Psychological nursing intervention was needed during the whole period of treatment.