• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.11
• /
• pp.854-858
• /
• 2010

In this study, we have investigated the effects of Cr dopant on the sintering and electrical properties of ZnO-$Sb_2O_3$ (ZS) ceramics for varistor application. Spinel phases including $\alpha-$ and $\beta$-type was formed at ZS system and $\alpha$-spinel was stabilized by Cr doping in ZS system. Densification of ZS and ZSCr system was retarded to $1000^{\circ}C$ by the formation of spinel at $800^{\circ}C$. The morphology and its distribution of spinel phases in ZS system was homogeneous but disturbed by Cr doping. In ZSCr the densification of ZnO compared with ZS system was more retarded by low concentration of Zn interstitial defects induced by Cr doping in addition to the effect of spinel phase formation. The defects in each system were identified as attractive coulombic center (ZS: 0.13 eV, ZSCr: 0.12 eV) and singly charged oxygen vacancy $V_0^{\cdot}$ (ZSCr: 0.33 eV). In all ZS and ZSCr system have week varistor behavior by the formation of double Schottky barrier at grain boundary but its stability of barrier was very sensitive to sintering temperature.

• Clinical and Experimental Pediatrics
• /
• v.59 no.3
• /
• pp.145-148
• /
• 2016

Drug rash with eosinophilia and systemic symptoms (DRESS) syndrome is a rare and potentially fatal condition characterized by skin rash, fever, eosinophilia, and multiorgan involvement. Various drugs may be associated with this syndrome including carbamazepine, allopurinol, and sulfasalazine. Renal involvement in DRESS syndrome most commonly presents as acute kidney injury due to interstitial nephritis. An 11-year-old boy was referred to the Children's Hospital of Pusan National University because of persistent fever, rash, abdominal distension, generalized edema, lymphadenopathy, and eosinophilia. He previously received vancomycin and ceftriaxone for 10 days at another hospital. He developed acute kidney injury with nephrotic range proteinuria and hypocomplementemia. A subsequent renal biopsy indicated the presence of acute tubular necrosis (ATN) and late exudative phase of postinfectious glomerulonephritis (PIGN). Systemic symptoms and renal function improved with corticosteroid therapy after the discontinuation of vancomycin. Here, we describe a biopsy-proven case of severe ATN that manifested as a part of vancomycin-induced DRESS syndrome with coincident PIGN. It is important for clinicians to be aware of this syndrome due to its severity and potentially fatal nature.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.521-524
• /
• 2008

The purpose of this study is to identify the character and condition of Cr in the clinker and thereby contribute to the research for reduction in utilizing Cr in the cement manufacturing process. The concentration of chromium by cement particle size and the distribution of chromium by clinker mineral were measured. Next, correlation was considered between chromium and the soluble components in cement. As a result, in the range that cement particles were 20${\mu}$m or less, highest soluble hexavalent chromium was found. When the concentration of chromium was measured through mineral separation, belite and the interstitial phase were higher in chromium than in alite. soluble hexavalent chromium was contained in domestic cement less than 20ppm, and its conversion ratio was somewhat high as 10 to 40% or so.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.142.2-142.2
• /
• 2013

The effect of substrate on catalytic activity of CO oxidation with transition metal Platinum nanoparticles on doped and undoped TiO2 was investigated. Titanium dioxide was doped chemically with non-metal anions including nitrogen and fluorine. Undoped TiO2 was synthesized via simple conventional sol-gel route. Thin films of titania were developed by spin coating technique and the characterization techniques SEM, XRD, UV-Vis Absorption Spectroscopy and XPS were carried out to examine the morphology of films, crystal phase, crystallites, optical properties and elemental composition respectively. XPS analysis from doped TiO2 confirmed that the nitrogen site were interstitial whereas fluorine was doped into TiO2 lattice substitutionally. Catalytic activity systems of Pt/doped-TiO2 and Pt/undoped-TiO2 were fabricated to reveal the strong metal-support interaction effect during catalytic activity of CO oxidation reactions. By arc plasma deposition technique, platinum nanoparticles with mean size of 2.7 nm were deposited on the thin films of doped and undoped titanium dioxide. The CO oxidation was performed with 40 Torr CO and 100 Torr O2 with 620 Torr He carrier gas. Turn over frequency was observed two to three folds enhancement in case of Pt/doped TiO2 as compared to Pt/TiO2. The electronic excitation and the oxygen vacancies that were formed with the doping process were the plausible reasons for the enhancement of catalytic activity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.301-301
• /
• 2010

2010년경 2.5G APD 시장은 3, 000억원 규모로 증가하는데 이는 FTTH 망의 확산에 힘입은 바 크다. 이와 같이 중요한 APD 소자는 현재 광통신 부품시장을 석권해 가고 있는 대만, 중국 업체들은 제조기술을 갖고 있지 않고 주로 미국-일본 기술에 의존하고 있기 때문에 Niche market으로 중요한 부품이라 할 수 있다. APD의 증폭은 높은 전기장에 의해 얻어지는데, 이 때문에 메사형 구조로는 신뢰성을 확보하기 어렵게 되고 따라서 평면형(Planar) 구조로 설계-제작하게 된다. APD 소자는 증폭층의 너비에 의해 APD의 이득-대역폭이 정해지므로 증폭층 폭을 정확하게 조절하는 것은 매우 중요하다. 증폭층의 폭은 에피 성장과 같은 높은 정밀성을 갖는 장비에 의해 조절하는 것이 아니라, Planar 구조의 특성상 Zn-확산에 의해 조절하게 된다. 대부분의 경우 Zn-확산은 Zn 또는 $Zn_3P_2$를 증착하여 drive-in 시키는 방법을 사용하는데, 이 경우 Zn가 interstitial site를 치고 들어감으로 인해 캐리어 농도가 $2{\times}10^{17}\;cm^{-3}$ 정도로 낮게 형성된다. 따라서 높은 인가 바이어스에서 p-side로 공핍층이 전개되기 때문에 증폭층의 폭을 조절하기가 매우 어렵다. 이 현상은 APD 제작에 있어서 수율과 관련이 깊다. 따라서 APD의 증폭층 폭을 tight하게 조절하기 위해서는 p-type 캐리어 농도를 높일 수 있는 gas-phase 확산 방식의 개발이 필요하다. 이 방식에는 Ampoule과 같은 closed tube 방식과 확산로와 같이 Gas를 지속적으로 흘려주면서 확산시키는 open-tube 방식이 있다. Ampoule 방식은 캐리어 농도 측면에서는 가장 좋은 방식이나, Ampoule의 size 및 온도 균일성 등으로 인해 생산성에 문제가 있다. 따라서 open-tube 방식의 확산기술개발은 매우 중요하다 할 수 있다. 본 연구에는 rapid thermal annealing (RTA) 방법에 의한 $Zn_3P_2$ 고체의 확산 방식과 DEZn MO source에 의한 Gas 확산 방식을 바탕으로 InP로의 확산된 Zn원자와 doping의 분포를 비교하였다. 실험결과, Gas 확산방식의 경우 Zn원자가 더욱 더 깊게 확산이 되었으며, 확산된 원자의 대부분이 도펀트로 작용함을 확인할 수 있었다.

• Journal of Powder Materials
• /
• v.26 no.2
• /
• pp.146-155
• /
• 2019

Rare earth magnets are the strongest type of permanent magnets and are integral to the high tech industry, particularly in clean energies, such as electric vehicle motors and wind turbine generators. However, the cost of rare earth materials and the imbalance in supply and demand still remain big problems to solve for permanent magnet related industries. Thus, a magnet with abundant elements and moderate magnetic performance is required to replace rare-earth magnets. Recently, $a^{{\prime}{\prime}}-Fe_{16}N_2$ has attracted considerable attention as a promising candidate for next-generation non-rare-earth permanent magnets due to its gigantic magnetization (3.23 T). Also, metastable $a^{{\prime}{\prime}}-Fe_{16}N_2$ exhibits high tetragonality (c/a = 1.1) by interstitial introduction of N atoms, leading to a high magnetocrystalline anisotropy constant ($K_1=1.0MJ/m^3$). In addition, Fe has a large amount of reserves on the Earth compared to other magnetic materials, leading to low cost of raw materials and manufacturing for industrial production. In this paper, we review the synthetic methods of metastable $a^{{\prime}{\prime}}-Fe_{16}N_2$ with film, powder and bulk form and discuss the approaches to enhance magnetocrystalline anisotropy of $a^{{\prime}{\prime}}-Fe_{16}N_2$. Future research prospects are also offered with patent trends observed thus far.

• Korean Journal of Materials Research
• /
• v.31 no.10
• /
• pp.552-561
• /
• 2021

For the purpose of manufacturing a high efficiency TiO₂ photocatalyst, B-doped TiO₂ photocatalysts are synthesized using a plasma electrolytic oxidation method in 0.5 M H₂SO₄ electrolyte with different concentrations of H₃BO₃ as additive. For the B doped TiO₂ layer fabricated from sulfuric electrolyte having a higher concentration of H₃BO₃ additive, the main XRD peaks of (101) and (200) anatase phase shift gradually toward the lower angle direction, indicating volume expansion of the TiO₂ anatase lattice by incorporation of boron, when compared with TiO₂ layers formed in sulfuric acid with lower concentration of additive. Moreover, XPS results indicate that the center of the binding energy peak of B1s increases from 191.45 eV to 191.98 eV, which suggests that most of boron atoms are doped interstitially in the TiO₂ layer rather than substitutionally. The B doped TiO₂ catalyst fabricated in sulfuric electrolyte with 1.0 M H₃BO₃ exhibits enhanced photocurrent response, and high efficiency and rate constant for dye degradation, which is ascribed to the synergistic effect of the new impurity energy band induced by introducing boron to the interstitial site and the improvement of charge transfer reaction.

• The Korean Journal of Pain
• /
• v.35 no.4
• /
• pp.458-467
• /
• 2022

Background: Few studies have investigated unspecified or idiopathic pain associated with COIVD-19. This study aimed to provide the incidence rates of unspecified pain and idiopathic pain in patients with COVID-19 for 90 days after COVID-19 diagnosis. Methods: A propensity score matched cohort was used, including all patients with COVID-19 in South Korea, and analyzed their electronic medical records. The control group consisted of those who had not had tests for COVID-19 at all. Unspecified pain diagnoses consisted of diagnoses related to pain included in the ICD-10 Chapter XVIII. Idiopathic pain disorders included fibromyalgia, temporomandibular joint disorders, headaches, chronic prostatitis, complex regional pain syndrome, atypical facial pain, irritable bowel syndrome, and interstitial cystitis. Results: After matching, the number of participants in each group was 7,911. For most unspecified pain, the incidences were higher in the COVID-19 group (11.7%; 95% confidence interval [CI], 11.0-12.5) than in the control group (6.5%; 95% CI, 6.0-7.1). For idiopathic pain, only the headaches had a significantly higher incidence in the COVID-19 group (6.6%; 95% CI, 6.1-7.2) than in the control group (3.7%; 95% CI, 3.3-4.1). However, using a different control group that included only patients who visited a hospital at least once for any reasons, the incidences of most unspecified and idiopathic pain were higher in the control group than in the COVID-19 group. Conclusions: Patients with COVID-19 might be at a higher risk of experiencing unspecified pain in the acute phase or after recovery compared with individuals who had not had tests for COVID-19.

• IMMUNE NETWORK
• /
• v.22 no.6
• /
• pp.48.1-48.13
• /
• 2022

With the spread of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) variants, which are randomly mutated, the dominant strains in regions are changing globally. The development of preclinical animal models is imperative to validate vaccines and therapeutics against SARS-CoV-2 variants. The objective of this study was to develop a non-human primate (NHP) model for SARS-CoV-2 Delta variant infection. Cynomolgus macaques infected with Delta variants showed infectious viruses and viral RNA in the upper (nasal and throat) and lower respiratory (lung) tracts during the acute phase of infection. After 3 days of infection, lesions consistent with diffuse alveolar damage were observed in the lungs. For cellular immune responses, all macaques displayed transient lymphopenia and neutrophilia in the early stages of infection. SARS-CoV-2 Delta variant spike protein-specific IgM, IgG, and IgA levels were significantly increased in the plasma of these animals 14 days after infection. This new NHP Delta variant infection model can be used for comparative analysis of the difference in severity between SARS-CoV-2 variants of concern and may be useful in the efficacy evaluation of vaccines and universal therapeutic drugs for mutations.

• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.6
• /
• pp.318-326
• /
• 2011

This study has been performed to investigate the effect of Al addition on High Temperature Gas Nitriding (HTGN) in 13%Cr-0.16%C stainless steel with different Al contents of 0.54%, 1.76% and 2.36%, respectively. HTGN treatment was carried out at $1100^{\circ}C$ for 1 hr, 5 hrs and 10 hrs. Nitrogen-permeated surface layers showed round type carbides of $Cr_{23}C_6$ and needle type nitrides of AlN in the matrix of martensite, representing 600~700 Hv. And the thickness of the surface layer increased with increasing Al content and HTGN treatment time. The inner region that was not permeated nitrogen showed chromium carbides in the mixed phase of martensite and ferrite for the 0.53% Al alloyed steel, however chromium carbides in the matrix of ferrite single phase were shown for the steels with the addition of 1.76%Al and 2.36%Al, representing the hardness of ~200 Hv. During nitrogen permeation from surface to the interior, substitutional elements of Cr, Al and Si moved toward the surface and interstitial element of carbon also moved from interior to the surface. This movement of alloying elements leads high concentration of these elements at the outmost surface, subsequently the lowest peak of substitutional elements were shown in the vicinity of near surface. After showing the lowest peak, the high concentration region of Al and C were formed due to the continuous movement of Al toward the surface. The long discontinuous precipitates of $Cr_{23}C_6$ and AlN were formed along the outmost surface owing to the high concentration of these alloying elements.