• The Journal of Internal Korean Medicine
• /
• v.34 no.3
• /
• pp.231-239
• /
• 2013

Objectives : This study was performed to evaluate inter-rater and intra-rater reliability of interpretation and reproducibility of a pulse analyser (MAXMAC27-Plus). Methods : 38 of 40 volunteers completed the pulse analysis consecutively. Three Korean medical doctors who had at least 2 years of clinical experience interpreted the pulse waves for 3 aspects of size, depth and shape, then inter-rater reliability and crude agreement was obtained. Reinterpretation was done 2 weeks later and intra-rater reliability and crude agreement was obtained. Intra-rater reliability and crude agreement between 1st and 2nd measurement was calculated. Cohen's weighted kappa for size, Cohen's kappa for depth and shape were used as statistical analysis. Results : Inter-rater reliability of size, depth and shape among 3 raters was 0.598, 0.604, and 0.312, respectively, showing moderate to substantial agreement. Average intra-rater reliability between 1st and 2nd interpretation of size, depth and shape was 0.806, 0.705, and 0.638, respectively, showing substantial to almost perfect agreement. However, intra-rater reliability between consecutive measurements of size, depth and shape was 0.221, 0.121, and 0.194, respectively, which showed only poor to fair agreement. Conclusions : Intra-rater and inter-rater reliability of one pulse wave showed relatively high concordance. Training by a clinical expert may effect better concordance among raters. Test-retest reliability showed poor agreement. Improvement of measurement technique and device performance will be needed.

• Journal of the Korean association of regional geographers
• /
• v.2 no.2
• /
• pp.183-196
• /
• 1996

The purpose of this paper is to explore the possibility of automatic extraction of line feature from Satellite image. The first part reviews the relationship between spatial filtering and cartographic interpretation. The second part describes the principal operations of high frequency filters and their properties, the third part presents the result of filtering application to the SPOT Panchromatic image of the Chinju city. Some experimental results are given here indicating the high feasibility of the filtering technique. The results of the paper is summarized as follows: Firstly the good all-purposes filter dose not exist. Certain laplacian filter and Frei-chen filter were very sensitive to the noise and could not detect line features in our case. Secondly, summary filters and some other filters do an excellent job of identifying edges around urban objects. With the filtered image added to the original image, the interpretation is more easy. Thirdly, Compass gradient masks may be used to perform two-dimensional, discrete differentiation directional edge enhancement, however, in our case, the line featuring was not satisfactory. In general, the wide masks detect the broad edges and narrow masks are used to detect the sharper discontinuities. But, in our case, the difference between the $3{\times}3$ and $7{\times}7$ kernel filters are not remarkable. It may be due to the good spatial resolution of Spot scene. The filtering effect depends on local circumstance. Band or kernel size selection must be also considered. For the skillful geographical interpretation, we need to take account the more subtle qualitative information.

• The Journal of Engineering Geology
• /
• v.11 no.2
• /
• pp.163-174
• /
• 2001

For quantitative evaluation of geotechnical engineering properties such as rippability and diggability, clear interpretation on the subsUJiace velocity structures should be preceded by figuring out top soil, weathered and soft rock layers, shape of basement, fracture zones, geologic boundary and etC. from the seismic refraction data. It is very important to set up suitable field parameters, which are the configuration of profile and its length, spacings of geophones and sources and topographic conditions, for increasing field data Quality. Geophone spacing of 3 to 5m is reconunended in the land slope area of house land development site. In refraction tomography technique, the number of source points should be more than a Cluarter of available channel number of instrument and the subsurface structure interpretation can be decreased the artifact of inversion by topographic effect. Compared with core logging data, it is shown that the velocity range of the soil is less than 700m/s, weathered rock 700~1,200m/s, soft rock 1,200~1,800m/s on the velocity tomogram section. And the upper limit of P-wave velocity for rippability is estimated 1,200 to 1,800m/s in land slope area of gneiss.

• 한국해양학회지
• /
• v.27 no.1
• /
• pp.19-34
• /
• 1992

Marine seismic refraction surveys have been carried out by Korea Institute of Geology, Mining and Materials(KIGAM) since 1984. The recording of refraction data was based on analog instrumentation. Therefore the resolution of refraction data was not good enough to distinguish many layers. The objective of the interpretation of seismic refraction data is the determination of intervals and critically refracted seismic wave propagation velocities through the layers beneath the sea floor. To determine intervals and velocities precisely, the resolution of refraction data should be enhanced. The intent of the study is to improve the quality of shallow marine refraction data by the digital technique using microcomputer- based acquisition and processing system. The system consists of an IBM AT microcomputer clone, an analog-digital(A/D) converter. A mass storage unit and a parallel processing board. The A/D converter has 12 bits of precision and 250 kHz of conversion rate. The magneto-optical disk drive is used for the mass storage of seismic refraction data. Shallow marine seismic refraction surveys have been carried out using the system at 6 locations off Ulsan and Pusan area. The refraction data were acquired by the radio sonobuoy. The refraction profiles have been produced by the laser printer with 300 dpi resolution after the basic computer processing. 5-9 layers were interpreted from digital refraction profiles, whereas 2-4 layers were interpreted from analog refraction profiles. the propagation velocities of sediments were interpreted as 1.6-2.1 km/sec. The propagation velocities of acoustic basement were interpreted as 2.4-2.7 km/sec off Ulsan area, 4.8 km/sec off Pusan area.

• Geophysics and Geophysical Exploration
• /
• v.15 no.3
• /
• pp.136-143
• /
• 2012

In this case study, we present the various and consistent processing techniques for the reasonable interpretation of aeromagnetic data. In the processing stage, we especially focused on the three major respects. First, in the low latitude area, severe artifacts are occurred as a result of reduction to the pole technique. To overcome this problem, variable alternative methods were investigated. From the comparison of each technique, we concluded that energy balancing method gives more fruitful result. Second, because of limited a priori information, it is nearly impossible to employ detailed geological survey due to wide and thick spreading of soils in the survey area. So we especially investigated the new techniques such as extracting slope, curvature and aspect information mainly used in GIS field as well as conventional methods. Finally, by using the Euler deconvolution, we extracted the depth information on the magnetic anomalous body. From the synthetic analysis between depth information and previous discussed results, the detailed future survey area was proposed. We think that a series of processing techniques discussed in this study may perform an important role in the domestic and abroad resource development project as a useful guideline.

• Journal of Animal Science and Technology
• /
• v.48 no.4
• /
• pp.541-554
• /
• 2006

Present review is to introduce an omasal sampling technique in rumen proteolysis and to consider some information on the omasal sampling technique with particular emphasis on methodological aspects. Use of the omasal sampling technique provides a new opportunity for accurate estimation of rumen metabolism with overcoming limitations of previous in vivo, in vitro and/or in situ methods. The potential advantages of the present technique compared with post-ruminal sampling techniques include following points; 1) only rumen cannulated animals are required, 2) less endogenous nitrogen (N) is contaminated in omasal digesta and 3) omasal digesta are devoid of exposure to acid peptide hydrolysis occurring in the abomasum. Estimates of soluble non-ammonia N (SNAN) in omasal digesta indicate that the assumptions underlying the in situ method that rapidly degradable N fraction can be degraded at an infinite rate and only insoluble dietary N escapes the rumen may be not valid. Quatitatively higher peptide concentration rather than free amino acid and soluble protein in escapable SNAN suggests that hydrolysis of peptide to amino acid may be the rate-limiting step in rumen proteolysis.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.2
• /
• pp.131-139
• /
• 2002

There have been many studies about marginal discrepancy of single restorations made by various systems and materials. But many of statistical inferences are not definite because of sample size, measurement number, measuring instruments. etc. The purpose of this study was to compare the marginal adaptations of the anterior single restorations made by different systems and to consider more desirable statistical methods in analysing the marginal fit. The in vitro marginal discrepancies of three different all-ceramic crown systems (Celay In-Ceram. Conventional In-Ceram. IPS Empress 2 layering technique) and one control group (PFM) were evaluated and compared. The crowns were made from one extracted maxillary central incisor prepared with a 1mm shoulder margin and $6^{\circ}$ taper walls by milling machine. 10 crowns per each system were fabricated. Measurements or a crown were recorded at 50 points that were randomly selected for marginal gap evaluation. Non-parametric statistical analysis was performed for the results. Within the limits of this study, the following conclusions were drawn: 1 Mean gap dimensions and standard deviations at the marginal opening for the maxillary incisor crowns were $98.2{\pm}40.6{\mu}m$ for PFM, $83.5{\pm}18.7{\mu}m$ for Celay In-Ceram, $104.9{\pm}44.1{\mu}m$ for conventional In-Ceram, and $45.5{\pm}11.5{\mu}m$ for IPS Empress 2 layering technique. The IPS Empress 2 system showed the smallest marginal gap (P<0.05). The marginal openings of the other three groups were not significantly different (P<0.05). 2 The marginal discrepancies found in this study were all within clinically acceptable standards ($100\sim150{\mu}m$). 3. When the variable is so controlled that the system may be the only one, mean value is interpreted to be the marginal discrepancy of a restoration which is made by each system and standard deviation is to be technique-sensitivity of each one. 4. From the standard deviations. the copy-milling technique (Celay/In-Ceram) was not considered to be technique-sensitive in comparison with other methods. 5. Parametric analysis is more reliable than non-parametric one in interpretation of the mean and standard deviation. The sample size of each group has to be more than 30 to use parametric statistics. The level of clinically acceptable marginal fit has not been established. Further studies are needed.

• Investigative Magnetic Resonance Imaging
• /
• v.22 no.2
• /
• pp.102-109
• /
• 2018

Purpose: The purpose of this study is to compare the performance of the T1 3D subtraction technique and the conventional 2D dynamic contrast enhancement (DCE) technique in diagnosing Cushing's disease. Materials and Methods: Twelve patients with clinically and biochemically proven Cushing's disease were included in the study. In addition, 23 patients with a Rathke's cleft cyst (RCC) diagnosed on an MRI with normal pituitary hormone levels were included as a control, to prevent non-blinded positive results. Postcontrast T1 3D fast spin echo (FSE) images were acquired after DCE images in 3T MRI and image subtraction of pre- and postcontrast T1 3D FSE images were performed. Inter-observer agreement, interpretation time, multiobserver receiver operating characteristic (ROC), and net benefit analyses were performed to compare 2D DCE and T1 3D subtraction techniques. Results: Inter-observer agreement for a visual scale of contrast enhancement was poor in DCE (${\kappa}=0.57$) and good in T1 3D subtraction images (${\kappa}=0.75$). The time taken for determining contrast-enhancement in pituitary lesions was significantly shorter in the T1 3D subtraction images compared to the DCE sequence (P < 0.05). ROC values demonstrated increased reader confidence range with T1 3D subtraction images (95% confidence interval [CI]: 0.94-1.00) compared with DCE (95% CI: 0.70-0.92) (P < 0.01). The net benefit effect of T1 3D subtraction images over DCE was 0.34 (95% CI: 0.12-0.56). For Cushing's disease, both reviewers misclassified one case as a nonenhancing lesion on the DCE images, while no cases were misclassified on T1 3D subtraction images. Conclusion: The T1 3D subtraction technique shows superior performance for determining the presence of enhancement on pituitary lesions compared with conventional DCE techniques, which may aid in diagnosing Cushing's disease.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.4
• /
• pp.659-668
• /
• 2008

Today, Fashion illustration has been diversified in its usage and respotlighted in the significance of its artistry by artists' interpretation and subjective perspectives. The purpose of this study is to find out theoretical reestablishment of this extended expression sphere and possible expression coverage of Fashion illustration. First, based on the Fashion illustration works revealing expressive features of Pop Art, this study reviews major considerations of Fashion illustration, i.e. assemblage, silk screen and new possible perspectives respectively. Therefore, based on the reviews, this study seeks to deduce pop art characteristics of expression technique found in Fashion illustration. Expression modes of Pop Art are represented broadly by assemblage, silk screen and new perspectives. Based on corresponding case analysis, this study could come to find out the following expressive features of pop art revealed in Fashion illustration: First, it is found that contemporary Fashion illustration pursues unbounded expressions and unprecedented styles owing to material variety. Second, it is found that contemporary Fashion illustration tries to adopt new and experimental techniques including computer program. Third, it is found that Fashion illustration characterized mainly by expressive features of Pop Art shows and pioneer a wide variety of application spheres including commercials(ads), newspaper or magazine illustration and cartoon ads simply beyond designer's creative drawing. Furthermore, it is expected that Pop Art's expressive features shown in Fashion illustration will evolve through a fusion with various experimental techniques, and keep having cultural and artistic influence in the future as well.

• Biomedical Science Letters
• /
• v.22 no.4
• /
• pp.167-173
• /
• 2016

The broth microdilution technique used to measure the minimal inhibitory concentration (MIC) of natural compounds against bacteria is problematic: it is difficult to visualize bacterial growth due to the color of the natural compound. Therefore, the use of a colorimetric method with a redox indicator by broth microdilution can simplify it and increase its objectivity. This study evaluated the usefulness of the colorimetric method in measuring the MIC of Phellinus baumii against methicillin-resistant Staphylococcus aureus (MRSA). The inhibition in disc diffusion method was observed from $8,192{\mu}g/mL$ P. baumii in all 10 MRSA isolates examined; however, the MIC ranges of the 10 MRSA isolates was $512{\sim}2,048{\mu}g/mL$ by broth microdilution using a colorimetric method; with the 3-(4,5-dimethylthiazole-2-yl)-2,5-diphenyltetrazolium bromide (MTT) indicator. In addition, the MIC of P. baumii by broth microdilution using MTT as indicator yielded excellent results. However, the 2, 3, 5-triphenyltetrazolium chloride (TTC) results could not be determined due to the color of the TTC indicator. The MICs of four antibiotics against MRSA using MTT or TTC were equal to those determined by visual interpretation. In conclusion, to evaluate the antibacterial effects of a natural compound, the broth microdilution technique is considered to be better than the disc diffusion method. Moreover, to resolve the problems caused by the colors of natural compounds, a colorimetric method such as that using MTT may be very valuable.