• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1536-1541
• /
• 2009

When water inside the concrete member evaporates by high temperature, the evaporation heat which absorbs surrounding temperature occurs. The rate of increment of the internal temperature in concrete is reduced due to the evaporation heat in spite of continuously increasing external temperature. In this paper, the prediction method of internal temperature of high strength concrete members considering the evaporation heat under the high temperature is presented. Finite element method is employed to facilitate thermal analysis for any position of member. And the thermal characteristics models of high strength concrete affected by high temperature are proposed. To demonstrate the validity of this numerical procedure, the prediction by the proposed algorithm is compared with the test results of other researchers. The proposed algorithm shows a good agreement with the experimental results including the phenomenon that temperature is lost by the evaporation heat.

• 한국물환경학회지
• /
• 제31권4호
• /
• pp.367-376
• /
• 2015

The momentum and kinetic turbulent energy carried by the wind to a stratified lake lead to basin-scale motions, which provide a major driving force for vertical and horizontal mixing. A three-dimensional (3D) hydrodynamic model was applied to Lake Tahoe, located between California and Nevada, USA, to simulate the dominant basin-scale internal waves in the deep lake. The results demonstrated that the model well represents the temporal and vertical variations of water temperature that allows the internal waves to be energized correctly at the basin scale. Both the model and thermistor chain (TC) data identified the presence of Kelvin modes and Poincare mode internal waves. The lake was weakly stratified during the study period, and produced large amplitude (up to 60 m) of internal oscillations after several wind events and partial upwelling near the southwestern lake. The partial upwelling and followed coastal jets could be an important feature of basin-scale internal waves because they can cause re-suspension and horizontal transport of fine particles from nearshore to offshore. The internal wave dynamics can be also associated with the distributions of water quality variables such as dissolved oxygen and nutrients in the lake. Thus, the basin-scale internal waves and horizontal circulation processes need to be accurately modeled for the correct simulation of the dissolved and particulate contaminants, and biogeochemical processes in the lake.

• 대한한방내과학회지
• /
• 제39권5호
• /
• pp.1061-1067
• /
• 2018

A patient had central fever following pontine hemorrhage. Central hyperthermia caused by stroke is a rare case, and it is difficult to control. There are few case reports about central hyperthermia in Korean medical treatment (KMT). The patient suffered central hyperthermia accompanied by tachycardia, dyspnea, and irritability. However, there was no evidence of infection. Thus, hypnotics, sedatives, and a minor tranquilizer (Lorazepam and Midazolam) was prescribed. Despite a temperature peak of $39.9^{\circ}C$, most of the symptoms were alleviated. The patient's average body temperature was about $37^{\circ}C$, which is higher than most people at $36.5^{\circ}C$. His symptoms were diagnosed as ascendant hyperactivity of liver Yang (肝陽上亢), and the patient was prescribed Shihogayonggolmoryo-tang. During the 44 days of KMT, there was no change in his average body temperature and no central hyperthermia over $39^{\circ}C$. This case report demonstrates the possibility of controlling central hyperthermia caused by pontine hemorrhage using KMT.

• 대한원격탐사학회지
• /
• 제25권2호
• /
• pp.155-163
• /
• 2009

여름철 우리나라 서해 연안을 관측한 SAR영상에서 다수의 내부파가 관측되고 있으며 이들은 동지나해에서 관측되는 내부파들에 비하여 소규모이며 상대적으로 많은 연구가 이루어지지 않고 있다. 이러한 내부파들은 여름철 표층 해수의 혼합을 발생시킴으로서 해양 생물학적으로 중요한 역할을 하며 대륙붕에서의 퇴적물 이동 및 음파의 전달에 있어서도 중요한 요소로서 서해의 물성 특성 연구에 있어서 반드시 고려되어야 한다. 내부파의 특성 분석을 위해서는 시공간적인 정보가 필요하며 이를 위해서는 현장 관측과 위성 관측이 동시에 이루어져야 한다. 본 연구에서는 2002년 5월 29일 현장 관측과 동시에 획득된 SAR영상을 분석하고 영상에 나타난 내부파와 동일한 내부파를 시간에 따른 수심별 등온선의 변화에서 분석 추적하였다.

• 생물환경조절학회지
• /
• 제19권1호
• /
• pp.1-5
• /
• 2010

착색단고추가 재배되고 있는 유리 온실과 플라스틱 필름 온실을 대상으로 내부 온 습도 변화 및 식물체 생육의 차이를 알아보고자 수행하였다. 재배 기간 동안 일평균 내부온도는 두 온실 간 차 이를 나타내지 않았으나, 그 변화폭은 플라스틱필름 온실에서 심하였다. 그리고 온실 내 수분부족분은 유리 온실에서 4.3$g{\cdot}m^{-2}$, 플라스틱필름 온실에서 5.6$g{\cdot}m^{-2}$로 플라스틱 필름 온실에서 더 많았다. 외부 광 1w에 대한 내부 온도 변화는 유리온실보다 플라스틱필름 온실에서 2배 정도 빨리 증가하는 경향이었다. 특히, 이러한 차이에는 일몰 전 후보다 일출 후 초기의 온도 차이가 가장 크게 영향을 주었다. 이에 따라 플라스틱 필름 온실보다 유리 온실에서 잎의 생육 및 광합성산물 생산율이 더 높았고, 생산성도 80% 정도 더 높았다. 이로 보아 유리 온실 대비 플라스틱필름 온실의 생산성을 다소 높이기 위해서는 일출 직후에 내부 환경의 집중적인 관리가 이루어져야 할 것으로 생각된다.

• 농업과학연구
• /
• 제42권4호
• /
• pp.369-374
• /
• 2015

본 연구는 가열 한우육 및 호주산우육 스테이크에서 심부온도에 따른 glucose, lactate 및 핵산 분해 물질 함량을 비교하고자 실시하였다. 시료로 한우육(거세우, 1등급) 및 호주산우육(Bos indicus, 100일 곡류 비육)의 등심(M. longissimus dorsi)과 우둔(M. semimembranosus)를 약 2 cm 두께로 절단하여 각각 세 그룹으로 나누고, $180^{\circ}C$ 오븐에서 심부온도가 각각 50, 70 및 $90^{\circ}C$가 되도록 가열하였다. Glucose 함량은 심부온도에 관계없이 한우육 스테이크가 호주산우육 스테이크에 비해 현저하게 높았다(P<0.05). 이와 반대로 lactate 함량은 한우육 스테이크가 호주산우육 스테이크보다 낮았다(P<0.05). 핵산 분해 물질 중 Hx 함량은 모든 심부온도에서 한우육 스테이크가 호주산우육 스테이크보다 낮았던 반면(P<0.05), GMP, IMP 및 inosine 함량은 한우육 스테이크가 높았다(P<0.05). 심부온도가 증가함에 따라 쇠고기 스테이크의 glucose 함량은 감소하는 경향을 보였으나, lactate 함량은 일정한 경향을 보이지 않았다. 또한 핵산 분해 물질 함량은 심부온도의 증가에 따라 유의적인 변화를 보이지 않았다. 따라서 가열 한우육 스테이크의 단맛 및 감칠맛 관련 풍미 전구물질 함량이 호주산우육 스테이크보다 높았다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2003년도 학술대회지
• /
• pp.626-629
• /
• 2003

본 연구는 외기에 면한 초고층 아파트 최상층부의 발코니 천장내부에 있는 H-Beam(내화피복+단열재로 구성)과 Parepet 부위 내부결로 발생가능성에 대한 예측을 해 봄으로써 해당공간 거주자의 쾌적한 환경 만족 및 불안을 해소 하는데 그 목적이 있다. 외주부를 성하고 있는 Curtain wall, Stone panel 또는 슬래브 바닥하부 등의 열적 취약공간에 대해 2차원 정상상태(온도평형) 열전도해석 Program을 이용, 온도예측과 온도분포해적을 통해 해당부위의 습기압분포에 따른 내부결로 예측을 실시하였다.

• 대기
• /
• 제22권3호
• /
• pp.299-307
• /
• 2012

This study is aimed to validate errors for detected suspicious temperature data using various quality control procedures for 61 weather stations in the Republic of Korea. The quality control algorithms for temperature data consist of four main procedures (high-low extreme check, internal consistency check, temporal outlier check, and spatial outlier check). Errors of detected suspicious temperature data are judged by examining temperature data of nearby stations, surface weather charts, hourly temperature data, daily precipitation, and daily maximum wind direction. The number of detected errors in internal consistency check and spatial outlier check showed 4 days (3 stations) and 7 days (5 stations), respectively. Effective and objective methods for validation errors through this study will help to reduce manpower and time for conduct of quality management for temperature data.

• 품질경영학회지
• /
• 제47권3호
• /
• pp.425-435
• /
• 2019

Purpose: The purpose of this study was to resolve the Naval ship's Local Operation Panel(LOP) malfunction problems which caused by overheating in summer season and dispatching to equatorial regions. Methods: Instead of using dual type heat insulation materials(consist with ceramic wool and glass wool), aerogel heat insulation materials were used for decreasing heat emissions from gas-turbine heat waste steam pipes passing water-jet- room. Experiment and Computational analysis of heat flow were conducted to analyze the internal room temperature changes. Results: The results of this study are as follows; The aerogel heat insulation materials suppress heat emission more efficiently than dual type insulation materials. The cold surface temperature of insulation was far more decreased and internal room, LOP surface temperature also showed significant results too. Conclusion: The substituted heat insulation materials appeared remarkable performance in decreasing room temperature that it could be used for suppressing the LOP overheatings and malfunctions.

• 동력기계공학회지
• /
• 제4권3호
• /
• pp.19-24
• /
• 2000

This study concerns the performance of the heat transfer of the thermosyphon having 80 internal groove in which boiling and condensation occur. Distilled water has been used as a working fluid. The liquid filling as the ratio of working fluid volume to total volume of thermosyphon has been used as the experimental parameters. The heat flux and heat transfer coefficient at the condenser are estimated from the experimental results. The experimental results have been assessed and compared with the existing theories. As a result of the experimental investigation, the maximum heat flow rate in the thermosyphon is proved to be dependent upon the liquid fill quantity. relatively high rates of heat transfer have been achieved operating in the thermosyphon with the internal groove. Also, a thermosyphon with the internal groove can be used to achieve some inexpensive and compact heat exchangers in low temperature. In addition, overall heat transfer coefficients and the characteristics as an operating temperature are obtained for the practical applications.