• Journal of Microbiology and Biotechnology
• /
• v.14 no.2
• /
• pp.430-434
• /
• 2004

Three extracellular protease-deficient Bacillus subtilis strains were transformed with the plasmid pCK98 containing the endo-$\beta$-1,4-glucanase (Eng) gene of B. subtilis BSE616. The three transformants, B. subtilis DB104 (pCK98), WB600 (pCK98) and WB700 (pCK98), produced the same high level of enzyme activity and showed similar patterns of cell growth and enzyme production. When B. subtilis DB 104 (pCK98), a two-extracellular protease deficient strain, was cultured for 22 h, almost all the secreted enzyme was found to be in the completely cleaved form by both activity staining and Western blotting studies. B. subtilis WB600 (pCK98), a six-extracellular protease-deficient strain, produced a partially cleaved form in addition to the intact form of the enzyme, although the degree of internal cleavage of the enzyme was greatly reduced. With B. subtilis WB700 (pCK98), a seven-extracellular protease-deficient strain, almost all the enzyme was produced as the intact uncleaved form. This study illustrates that a role of the V pr protease is to degrade foreign proteins produced in B. subtilis and WB700 is a suitable expression system for producing the intact form of the Eng and other foreign proteins that may lose at least part of their efficacy due to internal proteolytic cleavage.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.3
• /
• pp.511-521
• /
• 2002

A simple numerical modelling technique is proposed for estimating the shear stress distribution in beams of framed tube structures with multiple internal tubes. The structures arc analysed using a continuum approach in which each tube is individually modelled by a tube beam that accounts for the flexural and shear deformations, as well as the shear lag effects. The numerical analysis of shear stress is based on the mathematical analogy in conjunction with the elastic theory By simplifying assumptions regarding the form of strain distributions in external and internal tubes, the shear stress distributions are expressed in terms of a series of lineal functions of the second moments of area of the structures and the corresponding geometric and material properties, as well as the applied loads. Previous studies for axial stresses and shear lag phenomenon are further developed lot the numerical analysis of shear stresses in the tubes. The simplicity and accuracy of the proposed method are demonstrated through the solutions of throe numerical examples.

• Journal of Ocean Engineering and Technology
• /
• v.6 no.1
• /
• pp.78-86
• /
• 1992

The creep behaviors of 1%Cr-Mo-V and 12%Cr steam turbine rotor steels under static or cyclic load were examined at 600 and $700^{\circ}C$. The relationship between these two kinds of phenomena was studied and the experimental results were summarized as follows: 1) It is confirmed that the cyclic creep strain dependent on time is more available for creep, behavior analysis according to frequency change than that dependent on number of cycles, and the static creep, the special case of cyclic creep with stress ratio of 1 can be also more effectively analyzed by time-dependence. 2) The steady cyclic creep rate vs. the steady static creep rate, increases according to the increase of stress ratio, and this phenomena may occur on occasion of the decrease of the internal stress. 3) The initial strain affects on all the creep properties of the transient region, the steady state region and the rupture time in cyclic creep as well as static creep, and the quantitative relationships among them exist.

• Structural Engineering and Mechanics
• /
• v.27 no.4
• /
• pp.409-424
• /
• 2007

In this paper, an identification method of impact force is proposed for composite structures. In this method, the relation between force histories and strain responses is first formulated. The transfer matrix, which relates the strain responses of sensors and impact force information, is constructed from the finite element method (FEM). Based on this relation, an optimization model to minimize the difference between the measured strain responses and numerically evaluated strain responses is built up to obtain the impact force history. The identification of force history is performed by a modified least-squares method that imposes the penalty on the first-order derivative of the force history. Moreover, from the relation of strain responses and force history, an error vector indicating the force location is defined and used for the force location identification. The above theory has also been extended into the cases when using acceleration information instead of strain information. The validity of the present method has been verified through two experimental examples. The obtained results demonstrate that the present approach works very well, even when the internal damages in composites happen due to impact events. Moreover, this method can be used for the real-time health monitoring of composite structures.

• The Korean Journal of Mycology
• /
• v.50 no.4
• /
• pp.255-262
• /
• 2022

In this study, the fungal strain KNUF-21-F39 was isolated from a declined apple tree (Malus domestica) in the Chungcheongbuk province in Korea. The strain KNUF-21-F39 presented a slow growth rate and a variety of macroconidia shapes and sizes ranging from ovoid to fusoid and 1- to 5-septate, primarily showing 3- and 4-septate, with "S" -shaped macroconidia rarely observed. The strain was identified based on morphological characteristics along with phylogenetic analysis performed using the internal transcribed spacer region (ITS) and partial sequences of translation elongation factor 1-α (tef1), RNA polymerase largest subunit (rpb1), and calmodulin (cal) genes. The fungal strain KNUF-21-F39 was identified as Fusarium diversisporum, which has not been previously reported in Korea. The ice nucleation activity (INA) of the strain was also evaluated, identifying the strain as positive for INA. This is the first report characterizing F. diversisporum as an IN-active fungal species.

• The Journal of Internal Korean Medicine
• /
• v.21 no.4
• /
• pp.555-563
• /
• 2000

Objective : In order to know the antibacterial effects of Kyungok-go against Mycobacteria tuberculosis, Methods : In this study, I inverstigated these effects in terms of combination of other antibiotics with and without Kyungok-go on several different media conditions. Results: On Ogawa medium, Kyungok-go of the $10{\mu}/ml$ concentration showed the anti-Mycobacteria tuberculosis activity against antibiotic drug-sensitive strain. On Middle-blue medium, Kyungok-go of the $10{\mu}/ml$ concentration showed the anti-Mycobacteria tuberculosis activity against antibiotic drug-sensitive strain. Kyungok-go showed the anti mycobacteria tuberculosis activity with the meaningful result above a certain concentration. The resistance against M, tuberculosis as the concentration of Kyungok-go was decreased significantlly on the high concentration($500{\mu}/ml$) When rifampicin and Kyungok-go were used together, the resistance was decreased with the statistical significance as to the persistant antibacterial effect against M. tuberculosis, When ciprofloxacin and Kyungok-go were used together, the resistance was decreased with the statistical significance as to the persistant antibacterial effect against M. tuberculosis, The combination of treatment, Kyungok-go with both rifampicin and ciprofloxacin, showed much better antibacterial effect against M, tuberculosis than antibiotics alone. Conclusions : This study shows that Kyungok-go has antibacterial effect against M. tuberculosis and in the combination of treatment, Kyungok-go with antibiotics, showed much better antibacterial effect against M. tuberculosis than antibiotics alone,.

• Korean Journal of Veterinary Research
• /
• v.39 no.5
• /
• pp.995-1005
• /
• 1999

Staphylococcus aureus is one of most prevalent intramammary pathogens and have characteristics which are not easily eradicated. Recently, to understand the sources and transmission of S aureus, many studies have focused on the subtyping of field isolate. This study was preformed to investigate the distribution pattern and characteristics of the isolates using phenotyping and genotyping. Samples were collected from milk of each udder, cow bodies (perianal region, vagina, tail, udder skin, sole) and environment (floor, liner, milker's hands, water, towel, insect) from 6 herds located in Kyung-gi province. Forty five strains of S aureus were isolated from 3 dairy herds (A, B, C) and were typed by hemolytic pattern, antibiotic resistant pattern, enterotoxin typing and PCR-based DNA fingerprinting. Slime productivity was also compared by each subtype to examine potential infectiousness. Of 45 strains, 41 were isolated from milk samples and 4 were isolated from liners. No strains isolated in the bodies and environment. Forty five strains isolated were classified as 18 subtypes by phenotyping and genotyping. There was common subtype between A and B herd, but the subtype of C herd showed different pattern. Among predominant subtypes, 60% of S aureus strain isolated from A and B herd showed subtype I and 50% of S aureus strain isolated from C herd belonged to subtype VI and X II. Neither somatic cell count (SCC) nor slime production was significantly different between predominant and minor subtypes. In summary, the study revealed that liners play more important roles in the mode of transmission than environmental sources. Several subtypes can be found in a herd, only a few subtype, however, was largely associated with the majority of infection.

• Composites Research
• /
• v.14 no.6
• /
• pp.47-58
• /
• 2001

This paper describes applications of cure monitoring techniques by using embedded fiber optic strain sensors, which are extrinsic Fabry-Perot interoferometric (EFPI) and/or fiber Bra99 grating (FBG) sensors, to three kinds of molding methods of autoclave, FW and RTM molding methods. In these applications, internal strain of high-temperature curing resin was monitored by EFPI sensors. From theme experimental results, it was shown that strain caused by thermal shrink at cooling stage could be measured well. In addition, several specific matters to these molding methods were considered. As thor an autoclave molding of unidirectional FRP laminates, it was confirmed that off-axis strain of unidirectional FRP could be monitored by EFPI sensors. As for FW molding using room-temperature (RT) cured resin, it was found that the strain outputs from EFPI sensors represented curing shrinkage as well as thermal strain and the convergence meant finish of cure reaction. It was also shown that this curing shrinkage should be evaluated with consideration on logarithmic change in stiffness of matrix resin. As for a RTM melding, both EFPI and FBC sensors were employed to measure strain. The results showed that FBG sensors hale also good potential for strain monitoring at cooling stage, while the non-uniform thermal residual strain of textile affected the FBG spectrum after molding. This study has proven that embedded fiber optic strain sensors hale practical ability of cure monitoring of FRP. However, development of automatic installation methods of sensors remains as a problem to be solved for applications to practical products.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.4
• /
• pp.137-144
• /
• 2019

In coupon test of carbon fiber reinforced polymers (CFRP) as brittle materials, the converted strain derived from total deformation and effective length was introduced and its advantages were described. In general, measured value from strain gauge is used for determining the tensile properties of material, but it is not quite effective in CFRP because brittle material can not redistribute its stress and it only represents local behavior. For this reason, the converted strain response can be utilized effectively as a supplementary indicator, which evaluated the average value of tensile properties in brittle material and confirmed the strain measured by strain gauge. In addition, the converted strain clearly visualized 1) the effect of initial internal strain caused by fabrication errors and setup misalignment when applying gripping force and 2) post-response of partial rupture of CFRP caused by non-uniform strain distribution. non-uniform strain distribution.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.3
• /
• pp.19-31
• /
• 2007

Humidity and strain were estimated for understanding the relation between humidity change by self-desiccation and shrinkage in high-performance concrete with low water binder ratio and containing fly ash and blast furnace slag. Internal humidity change and shrinkage strain were about 10%, 10%, 7%, 11%, 11% and $320{\times}10^{-6}$, $270{\times}10^{-6}$, $231{\times}10^{-6}$, $371{\times}10^{-6}$, $350{\times}10^{-6}$ respectively on OPC30, O30F10, O30F20, O30G40, O30G50 and from the results, fly ash made humidity change and strain decrease but slag increase comparing with ordinary portland cement. Considering only relation internal humidity and shrinkage by self-desiccation, humidity change and shrinkage represented the strong linear relation regardless of mineral admixture. For specifying the relation on internal humidity change and autogenous shrinkage strain, shrinkage model was established which is driven by capillary pressure in pore water and surface energy in hydrates on the assumption of a single network and extended meniscus in pore system of concrete. This model and experimental results had a similar tendency so it would be concluded that the internal humidity change by self-desiccation in HPC originated in small pores less than 20nm, therefore controlling plan on autogenous shrinkage might be focused on surface tension of water and degree of saturation in small pore.