• 한국산학기술학회논문지
• /
• 제19권5호
• /
• pp.593-598
• /
• 2018

본 연구는 혹한기 결빙 방지를 위한 열회수형 환기장치의 개발에 관한 연구로써, 개발에 필요한 내부 리턴 댐퍼를 최적화하여 적용하기 위하여 전산유체해석(Computational Fluid Dynamics)을 수행하였고 이를 바탕으로 실험을 위한 시제품을 만들어 혹한기 결로 및 결빙실험을 수행하였다. 배기 재순환 비율이 최대가 되는 최적의 내부 리턴 댐퍼를 설계하기 위하여 총 16 model의 전산유체해석을 수행하였다. 전산유체해석 결과 외기에 대한 배기 재순환 비율은 59.9% ~ 62.3%로 나타났다. 외기온도(Outdoor Air Temperature)가 $-15^{\circ}C$ 이상에서는 배기 재순환 운전과 통상 운전 모두 결로와 결빙이 발생하지 않았다. 그러나 외기온도가 $-20^{\circ}C$에서는 내부 리턴 댐퍼를 $45^{\circ}$ 열어 배기 재순환 운전을 하여야 결로와 결빙이 발생하지 않았다. 혹한기 결빙 방지를 위한 열회수형 환기장치는 외기온도에 따라 통상 운전 모드와 배기 재순환 운전 모드의 두 가지 운전모드로 운전하여야 한다. 외기온도가 $-15^{\circ}C$보다 높을 경우에는 통상 운전 모드로 작동하고 외기온도가 $-15^{\circ}C$보다 낮을 경우에는 재순환 운전 모드로 작동하는 열회수형 환기장치의 운전 알고리즘을 개발하여 적용하였다.

• 한국통신학회논문지
• /
• 제24권10B호
• /
• pp.1841-1851
• /
• 1999

반얀 (Banyan) 네트웍은 ATM 스위치의 기본 구조로 많이 사용되어 왔다. 그러나, 반얀 네트웍은 내부 블록킹이 큰 단점으로 알려져 있으며, 이 단점을 보완하기 위해 제시되고 있는 구조 중 하나가 dilated 반얀 네트웍이다. 그런데, 기존의 dilated 반얀 네트웍 스위치는 네트웍 용량의 많은 부분이 낭비되는 구조를 가지고 있다. 본 논문에서는 이렇게 낭비되는 자원을 충분히 활용하여 스위치 용량을 증가시킬 수 있는 구조를 제안한다. 제안된 스위치는 deflection 라우팅과 recirculation을 가지는 구조로, 스위치의 성능은 uniform 트래픽 가정 하에 분석되었다. 분석 및 시뮬레이션을 통한 검증 결과, 제안된 스위치의 성능이 기존의 dilated 반얀 네트웍에 비해 월등히 향상됨을 보여 준다.

• 한국유체기계학회 논문집
• /
• 제18권4호
• /
• pp.36-42
• /
• 2015

This is a study about one of the most widely used hydro machinery all over the world - pump-turbine. The system has an impeller which pumps water to an upper reservoir during the night and the same impeller acts as a runner for turbine mode during the day for providing stable electrical power to the grid. The internal flow analysis is investigated in this study to help understand how the water passes through the passage of the vanes and blades, providing the designer with useful information on the behavior of recirculation flows which could reduce the efficiency of the pump-turbine. The 100 kW pump-turbine model has H = 32 m, $Q=0.336m^3/s$ and $N=1200min^{-1}$. For this study there are 7 blades, 19 stay vanes and 20 guide vanes. From this study, it was observed that this pump-turbine design showed very good internal flow characteristics with no flow separation and no recirculation flows in normal operation mode.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권7호
• /
• pp.902-909
• /
• 2012

This study is aimed to develop a new type of micro cross-flow hydro turbine which has very simple structure and relatively high efficiency. Micro eco cross-flow hydro turbine (ECFT) is proposed to apply in the ranges of very low and middle specific speeds in order to extend the operational range of the turbine. In order to not only obtain a basic data for a new design method of ECFT but also improve the turbine efficiency, experiments and CFD analysis on the performance and internal flow characteristics of the turbine model are conducted. According to the present study results, anti-recirculation block (ARB) and relatively wide turbine width with high flow rate improve the turbine efficiency.

• 한국연소학회지
• /
• 제5권1호
• /
• pp.99-108
• /
• 2000

Regenerative burner is a product of new combustion technology for realizing higher thermal efficiency and lower emissions, moreover utilizing very high preheated air temperature up to $1,000^{\circ}C$. In this study the experimental study was carried out to find out a combustion characteristics breaking the old combustion concept. From the variation of configuration of gas nozzle and hot test on the temperature distribution and NOx, CO, it was found out that the performance of regenerative burner was better than that of existing burner, mainly due to the effect of internal gas recirculation.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.81-88
• /
• 2002

It's well known that with the increase of preheated air temperature NOx is increasing ,while the energy consumption is decreasing. In this study the experimental study was carried out to find out a new method breaking the above-mentioned old concept. From the variation of configuration of gas nozzle and hot test on the temperature distribution and NOx, it was found out that the reduction of NOx was due to the effect of internal gas recirculation, which will be caused by air emitting velocity from burner nozzle.

• 대한안전경영과학회지
• /
• 제16권3호
• /
• pp.185-194
• /
• 2014

Internal engine is the main power source of vehicle and is the main source of air pollution. To satisfy this getting rigorous emission regulation, it must be solved simultaneously the dilemma of reducing emission gas and increasing heat efficiency. Diesel engine is preferred compare with gasoline engine in aspect of energy consumption but it must be solved reducing the containing of NOx, CO and HC. In this study: 1. Looking for alternative of performance improvement of Exhaust Gas Recirculation(EGR) which is emission gas reduction system. 2. Reducing malfunction of controlling emission gas. 3. Made possible precision control.

• 산업기술연구
• /
• 제19권
• /
• pp.59-65
• /
• 1999

This study is to analyze turbulent flow over a backward-facing step in a rectangular duct. The side wall effects on the internal flow were determined by varying the aspect ratio(defined as the step span-to-height ratio) from 1 to 20. In the flow behind a backward-facing step, separation, recirculation and redeveloping is occurred frequently. These phenomena appear in a particular variation by varying the aspect ratio. The results show that the aspect ratio has an influence on the velocity and reattachment length. When the AR is increased, the reattachment length is increased. For 6 over aspect ration, the rate of increase is decreased. The length of recirculation in the upper corner is increased, as the increase of aspect ration. It's width is not changed in the variation of aspect ration. The transverse, streamwise and spanwise velocities were decreased along the flow down stream of the step.

• 한국자동차공학회논문집
• /
• 제17권4호
• /
• pp.93-100
• /
• 2009

Intake/exhaust valve timing and exhaust cam lift were changed to control the internal exhaust gas recirculation (IEGR) and combustion phase of homogeneous charge compression ignition (HCCI) engine. To measure the IEGR rate, in-cylinder gas was sampled during from intake valve close to before ignition start. The lower exhaust cam made shorter valve event than higher exhaust cam and made IEGR increase because of trapping the exhaust gas. IEGR rate was more affected by exhaust valve timing than intake valve timing and increased as exhaust valve timing advanced. In-cylinder pressure was increased near top dead center due to early close of exhaust valve. Ignition timing was more affected by intake valve timing than exhaust valve timing in case of exhaust valve lift 8.4 mm, while ignition timing was affected by both intake and exhaust valve timing in case of exhaust valve 2.5 mm. Burn duration with exhaust valve lift 2.5 mm was longer than other case due to higher IEGR rate. The fuel conversion efficiency with higher exhaust valve lift was higher than that with lower exhaust valve lift. The late exhaust and intake maximum open point (MOP) made the fuel conversion efficiency improve.

• 한국터널지하공간학회 논문집
• /
• 제8권4호
• /
• pp.335-344
• /
• 2006

국내에서 제트팬 설치 간격 기준으로 사용되고 있는 일본도로공단 기준은 제트팬의 구경에 따라 설치간격을 제시하고 있지만 국제 상설도로 협회(PIARC)에서는 터널 직경에 10배를 유지할 것을 권장하고 있다. 이 기준들에 의해 결정된 설치 간격은 최대 약 2배 정도의 차이를 나타내고 있으며 이러한 설치 간격의 차이는 터널 환기 방식 선정에 불리한 요건으로 작용될 수 있기 때문에 터널 내부의 기류분석을 통한 적정 설치 간격 기준이 필요하다. 본 논문에서는 Froude 상사이론에 기초하여 아크릴 재질의 축소비 1/40의 모형 터널(직경 215mm, 연장 6.9m)과 모형 제트팬(구경 26.3mm, 31.6mm)을 제작하여 터널 내부에서의 기류분석을 위해 터널연장을 따라서 압력과 속도의 변화를 측정하였고, 제트팬 가동시 제트팬 주위에서 외부 공기의 영향으로 발생될 수 있는 재유입 현상을 확인하기 위해서 제트팬 주변에서 압력변화를 측정하였다. 모형실험 결과에서는 터널 내부기류는 제트팬 구경에 영향을 받지 않고 터널직경에 약 9배 정도가 되는 지점에서 압력과 속도의 변화가 안정되는 것으로 나타났으며 제트팬이 가동되면서 발생되는 재유입 현상을 확인할 수 있었다. 이러한 결과를 통해 터널 내부에서의 제트팬 설치 시에는 터널 직경에 약9배 이상을 확보해야 한다고 판단된다.