• Structural Engineering and Mechanics
• /
• v.6 no.6
• /
• pp.633-641
• /
• 1998

Finite element solutions are presented for the optimal design of symmetrically laminated rectangular plates with various types of internal line supports. These plates are subject to a combination of simply supported, clamped and free boundary conditions. The design objective is the maximisation of the biaxial buckling load. This is achieved by determining the fibre orientations optimally with the effects of bending-twisting coupling taken into account. The finite element method coupled with an optimisation routine is employed in analysing and optimising the laminated plate designs. The effect of internal line support type and boundary conditions on the optimal ply angles and the buckling load are numerically studied. The laminate behavior with respect to fibre orientation changes significantly in the presence of internal line supports as compared to that of a laminate where there is no internal supporting. This change in behavior has significant implications for design optimisation as the optimal values of design variables with or without internal supporting differ substantially.

• Structural Engineering and Mechanics
• /
• v.76 no.2
• /
• pp.239-250
• /
• 2020

This paper deals with free vibration of plates with steps and internal line supports by using a modified matched interface and boundary (MMIB) method. Different kinds of interfaces caused by steps, rigid and elastic line supports and their combinations are taken into account. Detailed MMIB procedures for dealing with these different interfaces are presented. Various examples are chosen to illustrate the accuracy and convergence of MMIB method. Numerical results show that the proposed MMIB is a highly accurate and convergent approach for solving the title issue. This study will extend the application range of MMIB method.

• Steel and Composite Structures
• /
• v.13 no.3
• /
• pp.207-223
• /
• 2012

This paper deals with critical thermal buckling load optimization of symmetrically laminated four layered angle-ply plates with one or two different intermediate line supports. The design objective is the maximization of the critical thermal buckling load and a design variable is the fibre orientation in the layers. The first order shear deformation theory and nine-node isoparametric finite element model are used for the finite element solution of the laminates. The modified feasible direction (MFD) method is used for the optimization routine. For this purpose, a program based on FORTRAN is used. Finally, the numerical analysis is carried out to investigate the effects of location of the internal line supports, plate aspect ratios and boundary conditions on the optimal designs and the results are compared.

• The Journal of Internal Korean Medicine
• /
• v.26 no.2
• /
• pp.320-332
• /
• 2005

Objectives: The aim of the experiment is to identify any anti-tumor effects of Duchesnea indica(Andr.) Focke on stomach, liver, urinary bladder, prostate and kidney cancer cells. Materials & Methods: For cancer cells, AGS stomach, Hep3B and Hep3G2 liver, HT-1197, HT-1376 urinary bladder, PC3 prostate, and A-704 kidney cancer cells, all obtained from Korean Ce 11 Line Bank, were used. The boiled extract of Duchesnea indica(Andr.) Focke (10 and 20 microliters) was injected into cultures, and the cultures were observed at 0, 6 and 12 hours, and from then on at 12 hours intervals up to 72 hours. The destruction of stomach, liver, urinary bladder, prostate and kidney cancer cells were measured through Trypan blue exclusion testing. The suppresion on viability of stomach, liver, urinary bladder, prostate and kidney cancer cells was measured via MTT assay. Anti-cancer mechanisms were assessed by analyzing the cell cycle. Results: In morphologic change, AGS, Hep3B, HepG2 showed the withdrawn and floating appearance that is typical in cellular impairment. The destruction of AGS, HT-1197, HT-1376, A-704, PC-3, Hep3B and HepG2 cancer cells in each test group was greater than that in the control group to a statistically significant degree. The suppression on viability of AGS, HT-1197 and Hep3G in each test group was greater than that in the control group to a statistically significant degree. Analysis of the cell cycle after injection of D... Focke showed inhibition of cell division in all test groups(AGS, Hep3B, HepG2, HT-1197, HT-1376, PC3, A-704). Conclusions: The results of this experiment suggest that Duchesnea indica(Andr.) Focke has statistically significant anti-tumor effects on stomach, urinary bladder, kidney, prostate and liver cancer, of which stomach and liver cancer are prominently significant. This in vitro experiment supports a role for Duchesnea indica(Andr.) Focke as a potential cancer treatment, but progressive research on Duchesnea indica(Andr.) Focke and its anti-tumor effects is needed to develop a practical application for it in cancer treatment.

• Fire Science and Engineering
• /
• v.31 no.3
• /
• pp.63-72
• /
• 2017

This study fabricated a low-voltage 10 circuit distribution board based on the KEMC (Korea Electrical Manufacturers Cooperative) 2102-610 standard and performed a characteristics assessment of the developed 10 circuit distribution board to secure product stability. The developed 10 circuit distribution board is designed to have the characteristics of insulation materials, as well as resistance to corrosion ultraviolet radiation and mechanical impact. The developed distribution board is fabricated to have an appropriate protection class of enclosure, electric shock prevention and protection circuits, switchgear and its components, internal electrical circuits and connectors, external conduct terminal, insulation characteristics, temperature rise test, heat resistance, etc. The developed 10 circuit distribution board consists of a single phase circuit and 3-phase circuits. It is possible to measure in real time the leakage current generated from the load distribution line by installing a sensor module at the load side of each of the branched switchgears. In addition, it is possible to increase a circuit according to the use and purpose of the load and to also manage and check the load in real time. Temperature rise tests were performed on the developed 10 circuit distribution board at 18 places including the inlet connection, main circuit and distribution circuit bus bars and bus bar supports, etc. The highest temperature of $65.3^{\circ}C$ was measured at the R-Phase of the connection of the MCCB power supply for the branch circuit bus bar and a temperature rise of $61.6^{\circ}C$ was measured at the T-Phase of the load side. When applying thermal stress to an MCCB for 6 hours at $180^{\circ}C$ using a heat resistant experimental device, it was found that the actuator lever was transformed and moved in the tripped state.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.1
• /
• pp.9-18
• /
• 2004

This paper presents an efficient image compression method for memory reduction in multimedia processor which can be simply implemented in hardware and provides high performance. The multimedia processor, which includes processing of high-resolution images and videos, requires large memories: they are external frame memories to store frames and internal line memories for implementing some linear filters. If we can reduce those memories by adopting a simple compression method in multimedia processor, it will strengthen its cost competitiveness. There exist many standards for efficiently compressing images and videos. However, those standards are too complex for our purpose and most of them are 2-D block-based methods, which do not support raster scanned input and output. In this paper, we propose a low-complexity compression method which has good performance, can be implemented with simple hardware logic, and supports raster scan. We have adopted 1${\times}$8 Hadamard transform for simple implementation in hardware and compression efficiency. After analyzing the coefficients, we applied an adaptive thresholding and quantization. We provide some simulation results to analyze its performance and compare with the existing methods. We also provide its hardware implementation results and discuss about cost reduction effects when applied in implementing a multimedia processor.