• 동굴
• /
• 제85호
• /
• pp.1-14
• /
• 2008

Electroluminescent Display(ELD) will be the innovative ideas to replace existed electricity illumination systems that consider to under effectiveness and environmental pollution generators in the commercial caves because ELD has less heat and low electricity consumption by the new illumination materials. Characteristics of the ELD are as following: it is a proper matter for the small merchandise ads due to its thickness is only below 3oo micoron, electricity consumption of ELD is less (1/3) than LED, ELD that is a whole face illumination system is much brighter than LED that is a dot illumination system, ELD is longer life than others due to its less light generation systems, ELD is any problems to bend, and it is a best device to use a light board ads. ELD has advantages on conservation of cave biosystems and reduce pollution when ELD is installed in touring spots and emergency corridors of weak illuminated cave internal areas by less heating and low electricity consumption using the indirect illumination of the ELD. Therefore when the high technologic ELD is installed in the commercial caves in Korea, it will be innovating cave environmental systems, saving budgets, and increasing tours.

• KIEAE Journal
• /
• 제2권2호
• /
• pp.33-38
• /
• 2002

There are a number of practical uses for devices which are capable of piping large amounts of light: illumination of areas where there would be maintenance, safety, or security problems with electronic light sources; piping sunlight into indoor areas for illumination; and the conversion of high luminous efficacy, good color quality, high intensity discharge lamps into more acceptable linear of area sources of light. Prism light guides are hollow structures which pipe light by means of total internal reflectin(TIR). These devices are unique in their ability to combine the efficiency of TIR with the relatively low cost of hollow structure. An important application stems from their ability to transform a point source of light such as an incandescent or discharge lamp into a linear or area source of light or illumination. We report the development of an economical, flexible prismatic film for fabricating the light guide wall. This guide geometries and films are currently under development.

• ALGAE
• /
• 제24권2호
• /
• pp.121-127
• /
• 2009

The unicellular green alga, Haematococcus pluvialis, accumulates the highest level of astaxanthin among knownastaxanthi.n-producing organisms. Light is the most important factor to induce astaxanthin by H. pluvialis. BIue andred LEDs, whose ${\lambda}_{max}$'s are 470 and 665 nm, respectively, were used for internally illuminated light sources.Fluorescent lamps were also used for both internal and external illumination sources. The astaxanthin levels in thesevarious lighting systems were analyzed and compared each other. The cultures under internally illuminated LEDsaccumulaled 20% more astaxanthin than those under fluorescent lamp. Furthermore, LEDs generated much lessheat than the fluorescent lamps, which gives one more reason for the LEDs being a suitable internal Light source forastaxanthin induction. The results reported here would lead novel designs of photobioreactors with improvementsof illumination methods for high level of astaxanthm production. The maximum astaxanthin concentrations as wellas the astaxanthin yield per supplied photon were increased by at least 20% when blue or red LEDs were supplied.

• 조명전기설비학회논문지
• /
• 제23권4호
• /
• pp.1-7
• /
• 2009

본 연구에서는 농촌 청소년 공부방을 대상으로 조명환경 실태조사를 실시하였다. 그 결과, 공부방의 평균 공간의 크기는 11.42[$m^2$]이며, 주로 광원은 형광등을 사용하였으며 조명사용방법은 전반조명만 이용하는 경우가 73.8[%]이며, 배광방식은 직접조명 방식을 주로 사용하고 있었다. 또한 스탠드를 소유하고 있는 가구는 45.7[%]이었으며, 국부조명인 스탠드를 사용하는 비율은 전체 조사대상의 20[%]에 지나지 않아 시작업이 효과적이지 못하였다. 내부공간 조도는 평균 131.82[lx]이며, 책상면 조도는 253.64[lx]로 최저허용조도의 42.3[%]에 해당하는 열악한 실정이었으며, 균제도는 평균 35.61[%]로 나타났다. 또한 사용자의 조명환경에 비해 만족도는 3.93점으로 높아 조명에 대한 인식이 매우 부족한 것으로 사료된다.

• 설비공학논문집
• /
• 제26권9호
• /
• pp.424-433
• /
• 2014

The purpose of this study is to evaluate the effectiveness in the lighting performance of mixed type light-shelf, by comparing and analyzing the internal light-shelf, external light-shelf, and mixed-type light-shelf. The performance of light-shelf was evaluated according to the angle of light-shelf at summer solstice, winter solstice, vernal equinox, and autumn equinox. The comparative analysis between the internal light-shelf, external light-shelf, and mixed-type light-shelf was carried out using the performance evaluation and analysis method. The result of performance evaluation is shown as follows. The mixed type light-shelf showed the highest lighting performance all at summer solstice, winter solstice, vernal equinox, and autumn equinox, followed by the external light-shelf and the internal light-shelf in the same order. The mixed type light-shelf was the most favorable for bringing daylight to indoors by adjusting the angle of light-shelf, and it also showed the highest lighting performance in terms of uniformity ratio of illumination which indicates the quality of light.

• 융합신호처리학회논문지
• /
• 제11권1호
• /
• pp.13-18
• /
• 2010

멀티터치 관련 연구는 전반사 장애 현상(FTIR: Frustrated Total Internal Reflection)의 원리를 기반으로 기존 방법을 이용하여 단지 구현하는 것이 대부분이다. 또한 멀티 터치점(Blob-Points) 검출이나 사용자 제스쳐 인식에 있어서 성능 향상을 위한 소프트웨어적 해법에 관한 연구는 드문 실정이다. 따라서 본 논문에서는 확산 투광(DI: Diffused Illumination) 방식을 기반으로 개선된 터치점 검출과 사용자 제스쳐 인식에 의한 멀티터치 테이블-탑 디스플레이를 구현한다. 제안된 방법은 실행 중인 어플리케이션 내의 객체들을 위한 동시 변형 멀티터치 명령을 지원하며, 제안한 사전 테스팅(Pre-Testing) 방법에 의해서 멀티 터치점 검출 과정에서 시스템 지연 시간의 감소가 가능하다. 구현된 멀티터치 테이블-탑 디스플레이 장치는 OSC(Open Sound Control) 프로토콜을 기반으로 하는 TUIO(Tangib1e User Interface Object) 환경에서 Flash AS3 어플리케이션을 제작하여 시뮬레이션 한 결과 최대 37% 시스템 지연 시간의 감소와 멀티터치 제스쳐 인식에서 성공적인 결과를 보였다.

• Journal of the Optical Society of Korea
• /
• 제20권5호
• /
• pp.614-622
• /
• 2016

In this paper, we propose a novel differential equation method for designing a total internal reflection (TIR) LED lens with double freeform surfaces. A complete set of simultaneous differential equations for the method is derived from the condition for minimizing the Fresnel loss, illumination models, Snell’s Law of ray propagation, and a new constraint on the incident angle of a ray on the light-exiting surface of the lens. The last constraint is essential to complete the set of simultaneous differential equations. By adopting the TIR structure and applying the condition for minimizing the Fresnel loss, it is expected that the proposed TIR LED lens can have a high luminous flux efficiency, even though its beam-spread angle is narrow. To validate the proposed method, three TIR LED lenses with beam-spread angles of less than 22.6° have been designed, and their performances evaluated by ray tracing. Their luminous flux efficiencies could be obviously increased by at least 35% and 5%, compared to conventional LED lenses with a single freeform surface and with double freeform surfaces, respectively.

• 설비공학논문집
• /
• 제23권9호
• /
• pp.604-609
• /
• 2011

The increased quality of life requires indoor illumination environment to have illumination with higher intensity. The increase in indoor illumination goes hand in hand with increase in indoor heat load. Of late, the internal heat in the cooling load has been growing gradually and the proportion of the lighting load has been bigger in the cooling load. The objective of the experiment here is to estimate the proper exhaust air flow displacement to remove heat from different types of lighting equipment. The heat causing the cooling load in lighting equipment is the ratio of heat per watt and the ratio of space for heat. Experimental measurements of the constant temperature and humidity in chambers that exhaust air flow by changing the exhaust calorific value was measured. Using the Airflow exhaust heat from lighting fixture of this study should help to reduce House cooling load.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2000년도 춘계 학술대회 및 국제 감성공학 심포지움 논문집 Proceeding of the 2000 Spring Conference of KOSES and International Sensibility Ergonomics Symposium
• /
• pp.62-66
• /
• 2000

This study investigated the effects of certain specific wavelengths of lighting on the autonomic nervous system (ANS) using the heart rate variability (HRV) as an index. Six subjects with normal color vision participated n this study between 15:00 and 17:00 hr to neutralize any visual differences arising from circadian rhythm. The environmental conditions of the laboratory were maintained in complete darkness and the temperature was equilibrated at 24$\Box$ with a relative humidity of 60%. Subjects were only subjected to light stimulation when the pupil of dyes attained a minimum size of 2 mm by projecting illumination equalized with the same spectral radiance of 500-700 nm with 50-nm internal radiance. HRV was calculated from electrocardiogram (ECG) with systematic respiratory control at 0.35 Hz. The results suggest that illumination with certain wavelengths may induce ANS activation.

• 반도체디스플레이기술학회지
• /
• 제11권3호
• /
• pp.1-6
• /
• 2012

In this paper, inspection system based on optical scanning mechanism is designed and developed for solar cell wafer. It consists of optical scanning mechanism, NIR camera optics, machinery and control system, algorithm of defect detection and software. Optical scanning mechanism is composed of geometrical camera optics and structured hybrid illumination system. It is used to inspection of surface defects. NIR camera optics is used for inspection of defects inside solar cell wafer. It is shown that surface and internal micro defects can be detected in developed inspection system for solar cell wafer.