• 한국소음진동공학회논문집
• /
• 제24권10호
• /
• pp.763-769
• /
• 2014

This study is on the experiment and prediction of the pipe noise due to the internal fluid. The vibration of pipe external surface and noise in air were measured according to the internal fluid velocity and pipe type. In the experiment, the vibration and noise level of the straight pipe and rounded pipes show that the vibration and noise level are almost same. The 900 mitred pipe shows the high vibration and noise level. In the prediction of noise due to the internal flow, the method using the pipe surface vibration and radiation efficiency shows good agreement with experimental result.

• Asia pacific journal of information systems
• /
• 제33권2호
• /
• pp.418-443
• /
• 2023

Many organizations facilitate a host of online knowledge sharing communities to assist internal knowledge sharing and operation. The permeable boundaries and voluntary structures of online communities allow individuals to span community boundaries and affect member resources and structures. Although much research has been done on members' knowledge contribution in online communities, relatively little is known about how a member's contribution to a community is shaped by the cross-level interactions of member's external boundary spanning and the community's environmental scanning or membership fluidity. Drawing from the theoretical lens of boundary spanning and the external view of online communities, we take a multi-level approach in the analysis of the activities of 1,992 members of 126 communities internal to a global company. We find that a member's external boundary spanning activity (e.g., external knowledge acquisition via reading posts) has a positive effect, though at a decreasing rate, on subsequent internal knowledge contribution (e.g., posting replies in the member's home community). This positive effect is stronger in communities that are more active in environmental scanning or have fluid membership and weaker in communities that are less active in environmental scanning or have stable membership.

• Ocean Systems Engineering
• /
• 제6권4호
• /
• pp.363-375
• /
• 2016

Large numbers of submarine pipelines are laid as the world now is attaching great importance to offshore oil exploitation. Free spanning of submarine pipelines may be caused by seabed unevenness, change of topology, artificial supports, etc. By combining Iwan's wake oscillator model with the differential equation which describes the vibration behavior of free-span submarine pipelines, the pipe-fluid coupling equation is developed and solved in order to study the effect of both internal and external fluid on the vibration behavior of free-span submarine pipelines. Through generalized integral transform technique (GITT), the governing equation describing the transverse displacement is transformed into a system of second-order ordinary differential equations (ODEs) in temporal variable, eliminating the spatial variable. The MATHEMATICA built-in function NDSolve is then used to numerically solve the transformed ODE system. The good convergence of the eigenfunction expansions proved that this method is applicable for predicting the dynamic response of free-span pipelines subjected to both internal flow and external current.

• 대한기계학회논문집B
• /
• 제20권6호
• /
• pp.1941-1947
• /
• 1996

Droplet size measurement technique was established for the sprayed viscous fluid by virtue of the installation of the sprayed-droplet size measurement system employing light scattering method. Atomization test results showed that the mean droplet size of the sprayed viscous fluid is decreased with the increase of the mass ratio of air to fuel and in case of the same air/fuel ratio, also with the increase of viscous fluid flow rate, and is increased with the distance from atomizer tip. Basic design data for the manufacture of external-mixing type, Y-Jet type, and internal-mixing type atomizers was acquired from the atomization tests.

• 한국분무공학회지
• /
• 제9권2호
• /
• pp.24-33
• /
• 2004

The effect of the working fluid flow conditions and nozzle geometry on the spray performance of a twin-fluid nozzle used in Selective Catalytic Reduction is investigated experimentally. The liquid pressure is varied in the range of 0.3atm to 1.5atm and the air pressure is varied from the 0.5atm to 3.0atm. relative position between liquid nozzle(internal nozzle) and air nozzle(external nozzle) tip changes front 1mm inside the air nozzle to 1mm outside the air nozzle. The orifice diameter of the air nozzle is varied with 5mm. 6mm and 7mm. Spray visualization is realized with CCD-Camera. SMD(Sauter Mean Diameter) and mean particle velocities are measured by PDPA(Phase Doppler Particle Analyzer) under various experimental conditions. The measuring point is 300mm away from the nozzle tip in the downstream spray. The experimental results are that spray angle is depended air flow rate because nozzle diameter, air pressure and nozzle tip relative positions are related air flow rate. SMD is depended air flow rate and water flow rate. Also, SMD is increased when water flow rate is bigger. SMD is decreased when Air flow rate is bigger.

• 한국해양학회지
• /
• 제28권1호
• /
• pp.17-23
• /
• 1993

회전반 위에서 상하경계면이 경사진 (${\beta}-effect$) 원통용기에 이층유체를 만들어 하층에 같은 밀도를 갖는 외부유체를 주입하여 경계면 변형에 따른 상층유체의 흐름을 관찰하였다. 상하층유체간의 경계면마찰을 최소화하여 하층유체운동(Sverdrup type) 에 따른 경계면의 변화에 적응하기 위한 상승유체 흐름은 internal Frounde Number($F_1$)에 민감하게 반응함을 보인다. 특히 $F_1$값이 6이상인 경우에는 상층유체운동 특성인 두 개의 폐쇄순환의 방향이 반대가 되어 서안경계류의 분리현상을 나타내고 있다. 서안에서의 분리 지점 역시 $F_1$값에 의존하며, 특히 $F_1{\;}~{\;}6$인 경우 가장 북쪽에서 분리되는 현상을 보였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.427-430
• /
• 2008

본 연구에서는 엔진으로부터 나오는 고온 여압 공기를 냉각시키기 위한 열교환기 개발을 수행하였다. 장착 환경을 고려한 외부 유동 흐름 및 열교환기 내부의 유동과 열전달 특성에 대한 전산해석을 통해 열교환기의 형상 및 유로 설계를 수행하였으며 이를 검증하기 위해 사용 환경 모사 시험을 수행하여, 그 결과를 비교하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.446-454
• /
• 2011

The noise of the subway has become a social issue and includes very complex reasons. The friction between rail and train wheel is the most important reason of the noise. In this study, we developed MFI(Multi Fluid Injection) System which sprays the mixed fluid(water, anticorrosive and lubricant) on the rail when the train is approaching to reduce the friction. To verify the system's effect, we measured the internal and external noise of the running train. The measured and analyzed results show that MFI system reduce the noise of the running subway.

• 동의생리병리학회지
• /
• 제27권5호
• /
• pp.578-586
• /
• 2013

The objective of this study was to investigate the diagnosis and treatment of Sjogren's syndrome(SS) such as syndrome differentiation and herbal medicine by reviewing Chinese traditional medicine's journals. The journal search was carried out using China National Knowledge Infrastructure(CNKI) and PubMed from January 2007 to July 2012. Searching key words were the various combination of "Sjogren's syndrome", "Traditional Chinese Medicine", "herbal medicine", and "syndrome differentiation". The final selection of 57 studies were extracted and summarized by two researchers independently. The syndrome differentiation was classified as yin deficiency with fluid depletion, yin deficiency with dryness heat, dryness toxin with yin damage, internal obstruction of static blood, dual deficiency of qi and yang, dampness-heat obstructing, wind with external contraction, liver qi depression, blood deficiency and wind-dryness, dual deficiency of yin and yang, and internal obstruction of phlegm-blood stasis. Liriope platyphylla(麥門冬), Rehmania glutinosa(生地黃), and Scrophularia buergeriana(玄蔘) were primarily prescribed to tonify yin, engender fluid and moisten dryness.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1995년도 추계학술대회 논문집
• /
• pp.24-29
• /
• 1995

A recently developed finishing process using rotating magnetic field is known to be very efficient for the finishing of parts such as vacuum tube, sanitary tube, etc., which are difficult to be finished by the conventional finishing methods as they are generally curbed tubes. But, the finishing system using rotating magnetic field have the defect that is the cross section of workpiece only circle because of internal rotating tool. Therefore, new finishing process of the workpieces which cross section are not circle is important and required. magnetic abrasive jet machining is a new concept finishing process. It is the precision internal finishing method using working fluid mixed with magnetic abrasives, which is jetted into the internal surface of tube. And magnetic poles are equipped on external surface of tube. In this study new concept finishing process or, magnetic abrasive jet machining system was developed. machining condition was predicted using simulation and some characteristics of the finishing process was analyzed.