• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.937-938
• /
• 2006

Tungsten heavy alloys with different ratios of Mo and Ni-Fe matrix were liquid-phase-sintered to investigate their microstructural evolution. Results indicated that increased Mo in the alloy promoted the formation of a (W,Mo)(Ni,Fe) type intermetallic compound in the furnace-cooled condition. It was a monoeutectic reaction when the added Mo content was higher than 49at.%, or a eutectic reaction when this value was between 37at,% to 49at.%. When Mo was added between 25at.% to 37at.%, the precipitation of the intermetallic compound took place by either a eutectoid or peritectoid reaction.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2003년도 춘계학술발표회 초록집
• /
• pp.31-32
• /
• 2003

In the Present study, the effect of galvannealing conditions on the phase distribution of the Zn-Fe intermetallic phases in the coating layer of the galvannealed steel sheets(GA) was investigated in an interstitial free steel and two kinds of high strength steels. The composition profiles of the coating layers were analyzed using AA and EDS analysis, and the distribution of the intermetallic phases was examined with the aids of X-ray diffraction. On the basis of the pole figure and OIM analyses, it was clarified that the preferred orientation of the $\zeta$ phase depended on the development of the $\gamma$-fibre texture in the substrate.

• 열처리공학회지
• /
• 제32권2호
• /
• pp.79-85
• /
• 2019

To investigate the influence of heat treatment on the growth intermetallic compounds (IMCs) at the joint interface of friction-welded Cu-Al, several heat treatments are performed at three different temperature with different times. The experiments reveal three different IMCs layers which are significantly influenced by atomic diffusion of Cu and Al with heat treatment conditions. Since the formation of these IMCs layers can affect mechanical properties of friction-welded Cu-Al interfaces, the relationship between the microstructure of IMCs layers and the tensile strength is analyzed according to heat treatment temperature and times.

• 마이크로전자및패키징학회지
• /
• 제11권3호
• /
• pp.23-30
• /
• 2004

무연솔더 $Sn0.7wt{\%}Cu,\;Sn3.8wt{\%}Ag0.7wt{\%}Cu$ 솔더와 Pt층의 시효처리에 따른 계면반응에 대한 연구를 수행하였다. $250^{\circ}C$에서 30 초간 리플로한 $Sn3.8wt{\%}Ag0.7wt{\%}Cu/Pt$시편과, $260^{\circ}C$에서 30초간 리플로한 $Sn0.7wt{\%}Cu/Pt$ 시편을 이용하여 125, 150, $170^{\circ}C$에서 25-121 시간동안시효처리 하였다. 시효처리 온도와 시간에 따른 계면 금속간화합물의 두께 및 형상변화를 주사전자현미경 (scanning electron microscopy, SEM), energy dispersive x-ray spectroscopy (EDS) 및 x-ray diffractometry (XRD)를 이용하여 분석하였다. 분석 결과 계면에서 $PtSn_4,\;PtSn_2$가 발견되었고, 이런 금속간화합물 성장은 확산에 의해 지배됨을 발견하였다. 시효처리 온도와 시간에 따른 금속간화합물의 두께 변화를 이용하여 각 솔더에서의 계면 금속간화합물의 생성 활성화 에너지를 구해본 결과 $Sn3.8wt{\%}Ag0.7wt{\%}Cu/Pt$는 145.3 kJ/mol, $Sn0.7wt{\%}Cu/Pt$는 165.1 kJ/mol의 값을 가지고 있었다.

• 한국재료학회지
• /
• 제34권4호
• /
• pp.208-214
• /
• 2024

To fabricate intermetallic nanoparticles with high oxygen reduction reaction activity, a high-temperature heat treatment of 700 to 1,000 ℃ is required. This heat treatment provides energy sufficient to induce an atomic rearrangement inside the alloy nanoparticles, increasing the mobility of particles, making them structurally unstable and causing a sintering phenomenon where they agglomerate together naturally. These problems cannot be avoided using a typical heat treatment process that only controls the gas atmosphere and temperature. In this study, as a strategy to overcome the limitations of the existing heat treatment process for the fabrication of intermetallic nanoparticles, we propose an interesting approach, to design a catalyst material structure for heat treatment rather than the process itself. In particular, we introduce a technology that first creates an intermetallic compound structure through a primary high-temperature heat treatment using random alloy particles coated with a carbon shell, and then establishes catalytic active sites by etching the carbon shell using a secondary heat treatment process. By using a carbon shell as a template, nanoparticles with an intermetallic structure can be kept very small while effectively controlling the catalytically active area, thereby creating an optimal alloy catalyst structure for fuel cells.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.66-72
• /
• 1995

Microstructural features of laser irradiated bulk target which consists of GeSbTe interrmertallic compounds were examined by analytical microscopy. It was found that in addition to vaporization, a liquid expulsion due to laer-material interatction is main contribution of materials removal in the sintered GaSbTe targets, The morphological change is qualitatively discussed in the present article.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2011년도 임시총회 및 하계학술연구발표회
• /
• pp.134-135
• /
• 2011

The fundamental properties of $Fe_3P$ intermetallic compound was investigated in terms of the FLAPW method within GGA. The FM state of $Fe_3P$ was found to be energetically more stable compared to the NM one. It is consistent with the experiment. In addition, the calculated magnetic moments of Fe atoms were calculated to be 2.367, 1.665, and 2.104 ${\mu}B$ for FeI, FeII, and FeIII atoms, respectively.

• Journal of Welding and Joining
• /
• 제32권3호
• /
• pp.43-52
• /
• 2014

Recent developing tendency of thermal spray for green automotive industry are studied by searching of NDSL, KIPRIS, ScienceDirect and so on. Spraying techniques such as plasma spray, microwave treatment, dry-ice blasting, HVOF thermal spray, cold spraying, aerosol deposition are introduced, further more spraying materials such as nano particles, intermetallic compound, TiAlN, TiC, Si-Al alloys are investigated.

• 한국결정성장학회지
• /
• 제15권6호
• /
• pp.269-275
• /
• 2005

Ni/Ni-aluminide//Ti/Ti-aluminide 경사기능 층상 복합재료를 박막 hot press법을 이용하여 제작하였다. NiAl과 $TiAl_3$ 금속간화합물 층이 자전고온합성반응을 통해 비교적 두껍게 형성되었고, 얇고 연속적인 $Ni_3Al$과 TiAl 층이 고상 확산을 통해 형성되었다. 파괴저항은 하중 방향이 crack arrester인 경우가 금속 층이 균열의 성장을 방해하기 때문에 crack divider 방향인 경우보다 높다. $Ni_3Al$과 NiAl 금속간화합물 층은 각각 벽개파괴와 입계파괴 거동을 보였고, $TiAl_3$층의 파괴 형태는 입내벽개파괴이었다. Ni/Ni-aluminide 층에서 관찰되는 기공과 금속 층과 금속간화합물 층의 미결합 부위가 낮은 파괴저항의 원인으로 판단된다. Acoustic emission (AE) 원파형 해석을 통해 제작된 복합재료의 파괴특성을 고찰하였다.

• 공업화학
• /
• 제7권5호
• /
• pp.913-924
• /
• 1996

본 연구에서는 소량의 네오디뮴이 첨가된 니켈 촉매에 대하여 티오펜 탈황 반응을 조사하였으며, 촉매 제조 방법에 따라, 공침법으로 제조된 비담지 NdNi 촉매, 비담지 금속간 화합물 $NdNi_5$ 촉매, 활성탄에 담지된 NdNi 촉매 등이 연구되었다. 공침법으로 제조된 비담지 NdNi 촉매의 경우 소량의 네오디뮴이 첨가되면 티오펜 탈황 반응성이 급격히 증가하여 니켈 촉매에서 네오디뮴의 역할이 아주 큼을 알 수 있다. 비담지 금속간 화합물 $NdNi_5$ 촉매는 소성, 황화 처리의 과정을 거치면서 금속간 화합물이 파괴되고 산화물, 황화물로 각각 변하였다. 비담지 촉매의 경우 티오펜 탈황 반응성은 촉매의 표면적으로 설명이 가능하고 네오디뮴의 역할은 니켈 촉매의 표면적을 높게 유지시키는 구조 촉진제(structural promoter)로 작용한다. 니켈의 분산도가 다른, 금속간 화합물 $NdNi_5$ 촉매, 공침법으로 제조된 NdNi 촉매, 활성탄에 담지 된 NdNi 촉매 순으로 니켈을 기준으로 할 때 티오펜 탈황 반응활성이 각각 10배씩 증가하였다.