• ETRI Journal
• /
• v.27 no.5
• /
• pp.569-578
• /
• 2005

The purpose of this paper is to describe the implementation of monolithically matching circuits, interface circuits, and RF core circuits to the same substrate. We designed and fabricated on-chip 1 to 6 GHz up-conversion and 1 to 8 GHz down-conversion mixers using a 0.8 mm SiGe hetero-junction bipolar transistor (HBT) process technology. To fabricate a SiGe HBT, we used a reduced pressure chemical vapor deposition (RPCVD) system to grow a base epitaxial layer, and we adopted local oxidation of silicon (LOCOS) isolation to separate the device terminals. An up-conversion mixer was implemented on-chip using an intermediate frequency (IF) matching circuit, local oscillator (LO)/radio frequency (RF) wideband matching circuits, LO/IF input balun circuits, and an RF output balun circuit. The measured results of the fabricated up-conversion mixer show a positive power conversion gain from 1 to 6 GHz and a bandwidth of about 4.5 GHz. Also, the down-conversion mixer was implemented on-chip using LO/RF wideband matching circuits, LO/RF input balun circuits, and an IF output balun circuit. The measured results of the fabricated down-conversion mixer show a positive power conversion gain from 1 to 8 GHz and a bandwidth of about 4.5 GHz.

• Structural Engineering and Mechanics
• /
• v.45 no.1
• /
• pp.53-67
• /
• 2013

This study aimed to develop a model to accurately predict the acceleration of structural systems during an earthquake. The acceleration and applied force of a structure were measured at current time step and the velocity and displacement were estimated through linear integration. These data were used as input to predict the structural acceleration at next time step. The computation tool used was the Volterra/Wiener neural network (VWNN) which contained the mathematical model to predict the acceleration. For alleviating problems of relatively large-dimensional and nonlinear systems, the VWNN model was utilized as the signal processing tool, including the Taylor series components in the input nodes of the neural network. The number of the intermediate layer nodes in the neural network model, containing the training and simulation stage, was evaluated and optimized. Discussions on the influences of the gradient descent with adaptive learning rate algorithm and the Levenberg-Marquardt algorithm, both for determining the network weights, on prediction errors were provided. During the simulation stage, different earthquake excitations were tested with the optimized settings acquired from the training stage to find out which of the algorithms would result in the smallest error, to determine a proper simulation model.

• Journal of Agricultural Extension & Community Development
• /
• v.22 no.3
• /
• pp.285-292
• /
• 2015

Recently, the demand of rural tourism has been increased to promote farm household income and rural economy. Korean government has supported to promote rural tourism. One of the most difficult tasks in estimating the economic impact of the tourism industry is how the industry should be defined in terms of an economic sector, since tourism is not defined in national Input-Output (I-O) tables or in the Standard Industrial Classification code. Moreover, there is no specified Standard Industrial Classification for rural tourism. The purpose of the study aims to examine specified Standard Industrial Classification of rural tourism using the I-O model analysis to estimate the economic impacts of rural tourism. Results showed that there were two components considered as inputs. One is the inputs that final demand can move to input of rural tourism in I-O tables. The other is one that the final demand was provided by farm household as intermediate inputs.

• Journal of electromagnetic engineering and science
• /
• v.2 no.2
• /
• pp.117-123
• /
• 2002

This paper describes the design for the resistive FET mixer with low If for the 4-Ch DBF(Digital Beam Forming) receiver This DBF receiver based on the direct conversion method is generally suitable for high-speed wireless mobile communications. A radio frequency(RF), a local oscillator(LO) and an intermediate frequency(If) considered in this research are 2.09 GHz, 2.08 CHz and 10 MHz, respectively. This mixer is composed of band pass filter, a low pass filter and a DC bias circuit. Super low noise HJ FET of NE3210S01 is considered in design. The RE input power, LO input power and Vcs are used -10 dBm, 6 dBm and -0.4 V, respectively. In the 4-Ch resistive FET mixer, the measured If and harmonic components of 10 MHe, 20 MHz and 2.087 CHz are about -19.2 dBm, -66 dBm and -48 dBm, respectively The If output power observed at each channel of 10 MHz is about -19.2 dBm and it is higher 28.8 dBm than the maximum harmonic component of 2.087 CHz. Each If output spectrum of the 4-Ch is observed almost same value and it shows a good agreement with the prediction.

• Journal of Climate Change Research
• /
• v.7 no.1
• /
• pp.59-68
• /
• 2016

The world's major countries have focused on the renewable energy industry as the solution to climate change and the energy crisis. Nevertheless, there are no studies on the economic effects of the renewable energy industry. This study analyzed the economic effects of Korea's renewable energy industry by using the 2010 Input-Output Table. It is estimated that Korea's renewable energy industry made a production-induced effect of 2.0262 won, and a value-added-induced effect of 0.6138 won through an increase in output growth of 1 won, and an employment-induced effect of 2.3046 labors through an increase in output growth of 1 billion won. Both the effect ratio and the response ratio were greater than 1, which means the renewable energy industry is an intermediate manufacturing industry whose forward linkage effect and backward linkage effects are large. These results show differences with previous studies that classified electricity sector and renewable energy industry into final primary production industries. It is expected that the economic effects of the renewable energy industry will become greater in the future. Therefore, research on statistics related to the renewable energy industry is needed for more precise analysis.

• Structural Engineering and Mechanics
• /
• v.40 no.4
• /
• pp.453-469
• /
• 2011

A one-story, wooden-frame, intermediate-bay model with Dou-Gon designed according to the Building Standards of the Song Dynasty (A.D.960-1279), was tested on a unidirectional shaking table. The main objectives of this experimental study were to investigate the seismic performance of Chinese historic wooden structure under various base input intensities. El Centro wave (N-S), Taft wave and Lanzhou wave were selected as input excitations. 27 seismic geophones were instrumented to measure the real-time displacement, velocity and acceleration respectively. Dynamic characteristics, failure mode and hysteretic energy dissipation performance of the model are analyzed. Test results indicate that the nature period and damping ratio of the model increase with the increasing magnitude of earthquake excitation. The nature period of the model is within 0.5~0.6 s, the damping ratio is 3~4%. The maximum acceleration dynamic magnification factor is less than 1 and decreases as the input seismic power increases. The frictional slippage of Dou-Gon layers (corbel brackets) between beams and plates dissipates a certain amount of seismic energy, and so does the slippage between posts and plinths. The mortise-tenon joint of the timber frame dissipates most of the seismic energy. Therefore, it plays a significant part in shock absorption and isolation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.12
• /
• pp.1345-1352
• /
• 2014

Bus architecture of SoC has been replaced by NoC in recent years. Noc uses the multi-clock domains to transmit and receive data between neighbor network interfaces and they have same frequency, but a phase difference because of clock skew. So a synchronizer is used for a mesochronous frequency in interconnection between network interfaces. In this paper the metastability is defined and analyzed in a D latch and a D flip-flop to search the possibilities that data can be lost in the process of sending and receiving data between interconnects when a local frequency and a transmitted frequency have a phase difference. 180nm CMOS model parameter and 1GHz are used to simulate them in HSpice. The simulation results show that the metastability happens in a latch and a flip-flop when input data change near the clock edges and there are intermediate states for a longer time as input data change closer at the clock edge. And the next stage can lose input data depending on environmental conditions such as temperature, processing variations, power supply, etc. The simulation results are very useful to design a mescochronous synchronizer for NoC.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.4
• /
• pp.23-29
• /
• 2014

Recently, in power system studies, Multiple Energy Carriers (MECs) such as Energy Hub has been broadly utilized in power system planners and operators. Particularly, Energy Hub performs one of the most important role as the intermediate in implementing the MECs. However, it still needs to be put under examination in both modeling and operating concerns. For instance, a probabilistic optimization model is treated by a robust global optimization technique such as multi-agent genetic algorithm (MAGA) which can support the online economic dispatch of MECs. MAGA also reduces the inevitable uncertainty caused by the integration of selected input energy carriers. However, MAGA only considers current state of the integration of selected input energy carriers in conjunctive with the condition of smart grid environments for decision making in Energy Hub. Thus, in this paper, we propose an immune algorithm based Multiple Energy Carriers System which can adopt the learning process in order to make a self decision making in Energy Hub. In particular, the proposed immune algorithm considers the previous state, the current state, and the future state of the selected input energy carriers in order to predict the next decision making of Energy Hub based on the probabilistic optimization model. The below figure shows the proposed immune algorithm based Multiple Energy Carriers System. Finally, we will compare the online economic dispatch of MECs of two algorithms such as MAGA and immune algorithm based MECs by using Real Time Digital Simulator (RTDS).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.3
• /
• pp.288-300
• /
• 2002

In this paper, a novel method of equalization of RF transceivers is suggested for MIMO(Multiple Input Multiple Output) antenna actively studied for high speed data transmission in the recent IMT-2000 system. The core of suggestion is in equalizing the transfer characteristics of multiple transceivers using feedback and memory during the predefined calibration time. This makes it possible to weight the signals in the intermediate frequency, which is easier in the application of recently developed DoA(Direction of Arrival) algorithms. In addition, the time varying optimum cell formation according to traffic is feasible by antenna beam-forming based on the DoA information. The suggested method of equalizing multiple transceivers are successfully verified using envelope simulation. two outputs. This paper is concerned with the diagnosis of multiple crosstalk-faults in OSM. As the network size becomes larger in these days, the convent.
nal diagnosis methods based on tests and simulation be.
me inefficient, or even more impractical. We propose a simple and easily implementable alg？ithm for detection and isolation of the multiple crosstalk-faults in OSM. Specifically, we develop an algorithm for isolation of the source fault in switc.
ng elements whenever the multiple crosstalk-faults are.
etected in OSM. The proposed algorithm is illustrated by an example of 16$\times$16 OSM.

• Journal of Agricultural Extension & Community Development
• /
• v.23 no.3
• /
• pp.285-293
• /
• 2016

The increase in demand for leisure time by the public and the vitalization of agricultural tourism resulting from the expansion of the five-day work week are expected to greatly contribute to the rural economy, but actual studies analyzing the ripple effect of the agricultural tourism industry are lacking. In order to analyze the economic ripple effect, tourism or agricultural tourism must become an independent sector in the inter-industry relations table's sector classification, but because it is not, the study uses a method of analysis which involves creating a satellite account. However, because agricultural tourism has a clear main agent in farms unlike general tourism which does not, there is one method in which provisions are made by farms or farm villages and another method in which outside products are used. The purpose of the present is to measure the economic ripple effect of agricultural tourism with a focus on 162 subclasses by applying positive data from the education sector input into agricultural tourism. Satellite accounts which considered intermediate input were created and applied to positive data, the analysis of which revealed agricultural tourism to account for 462 billion won, which is 0.01% of the total production amount of 3,503,480 billion won, while the production inducement coefficient was 3.2895 units when the final demand of agricultural tourism occurs. When the production inducement coefficient is at 3.2895 units, highest sector was agricultural tourism at 0.9968 units followed by restaurants and bars at 0.3325 units, roadt transportation services at 0.3183 units, lodging services at 0.1520 units, and petroleum products at 0.1290 units.