• 한국환경보건학회지
• /
• 제30권2호
• /
• pp.167-172
• /
• 2004

In this study, we carried out the research for the recycling potential of the dyeing wastewater treatment sludges as construction materials. The incineration ash of sludges were solidified as interlocking block in condition of sludge/cement ratio 2.5%, 5.0% and 10%, respectively. Those interlocking blocks were cured for 3days, 7days and 28days in ambient air condition, respectively. The results of this research were summarized as follows: The dyeing wastewater treatment sludges was below the Korea Leaching Limit. After incineration, the ash was manufactured as interlocking block. Bendable strength over 50kg$_{f}$/$\textrm{cm}^2$ suitable for interlocking block was obtained only when the sample was cured for 7days at sludge/cement ratio 2.5% and 5.0%. Hygroscopic ratio of interlocking block was above the Korea Industry Standard. We think that recycling of the incineration ash from dyeing wastewater treatment sludges to interlocking block will have high potential possibility.y.

• 한국도로학회논문집
• /
• 제16권2호
• /
• pp.1-9
• /
• 2014

PURPOSES : This study aims to evaluate the performance of interlocking block pavement system for low speed highway. METHODS : Through on-site monitoring, environmental impact assessment of interlocking block pavement such as heat island reduction, traffic safety, noise pollution were evaluated as compared with asphalt pavement. Also the pavement condition and roughness were evaluated according to performance period. RESULTS : Surface temperature of interlocking block pavement was about 7 degree lower than asphalt pavement in midsummer. Compared to asphalt pavement, vehicle speed reduction effect of interlocking block pavement was about 2kph. For low speed driving, the noise pollution was measured at a similar level for both asphalt and interlocking block pavement. After 42month service period, the breakage of block was only 0.24% for the whole surveyed area. IRI of interlock block pavement was estimated within the range of 5~8m/km. CONCLUSIONS : Depending on the performance monitoring results such as heat island reduction, providing traffic safety and keeping a good pavement condition for a long service period, it assures that interlocking block pavement was applicable for low speed road.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.25-26
• /
• 2020

During the molding process of the existing interlocking block, the pigment is firstly laid, and cement is poured on the pigment secondly to give vibration. Interlocking blocks made of conventional cement are entirely dark where the pigment area is removed. On the other hand, when looking at the mortar with oyster shells added, the color is closer to that of the existing cement mortar. Therefore, if an interlocking block is produced by adding a pigment to a mortar with an oyster shell added, it is considered that the amount of pigment is less than that of the existing interlocking block. This study is a basic study of interlocking blocks. To investigate the strength characteristics of mortar using oyster shell powder as aggregate, W/C is 25%, 50%, oyster shell replacement rate is 0%, 25%, 50%, 75%, 100% was substituted to make a mortar and its strength change was studied.

• 한국도로학회논문집
• /
• 제10권2호
• /
• pp.115-124
• /
• 2008

본 연구에서는 단지 내 아파트 블록포장 50곳의 현장조사를 통하여 주요 파손형태를 조사하여 공용성을 평가하였다. 공용성 평가결과에 따르면, 조사대상지역에서 9년의 공용연수를 가진 블록포장의 유지관리지수는 7.9에서 8.9사이이며, 블록포장의 상태는 양호한 것으로 나타났다. 따라서 건설교통부 '보도설치 및 관리지침'에 10년으로 제시된 보도의 교체주기는 검토할 필요가 있다는 결론을 도출하였다. 또한 블록포장의 공용성을 객관적으로 평가하기 위해서 일본블록포장협회에서 제시한 유지관리 기준과 건설교통부 '보도설치 및 관리지침'의 유지관리기준을 조합하여 국내 현실에 적합한 유지관리기준을 제시하였다. 외국과 비고할 때 국내의 블록포장의 기준에는 내구성 관련기준과 줄눈채움재 및 모래안정층의 품질관리 기준이 명확히 제시되어 있지 않다. 따라서 블록포장의 기대수명과 유지관리비용을 줄이기 위하여, 본 연구에서는 국내외 기준을 비교하여 이러한 기준들을 국내기준에 포함시킬 것을 제안하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.203-206
• /
• 1997

In this paper, the properties of Interlocking block contained blast furnace slag cement are compared with that with O.P.C.(ordinary portland cement) and are analyzed under various mix proportions and the dosage of AE agent. According to the experimental results, compressive strength and flexural strength of interlocking block with blast furnace slag cement are lower than that with OPC. Also the strength and the ratio of absorption decrease with higher dosage of AE agent. although interlocking block with OPC has better performance than that of blast furnace slag in the side of quality, it is worth while to use the blast furnace slag as materials of interlocking block considered the side of recycling of resources and economy.

• 한국도로학회논문집
• /
• 제14권5호
• /
• pp.67-74
• /
• 2012

PURPOSES: In this study the influence factors related to abrasion resistance of interlocking concrete block have been evaluated, and comparisons between various domestic and foreign abrasion test methods was also accomplished. METHODS: The modified rotational cutting method suggested in ASTM C 944 was applied. Surface materials with different types of fine aggregate such as crushed sand, sea sand, and mixture of crushed and sea sand were tested to compare the aggregate effect for abrasion resistance. RESULTS: The different surface mixtures with various W/C ratios, mortar and fly ash ratios have been investigated for functional and economical considerations. CONCLUSIONS: This study had obtained reliable results by changing diamond blade of rotating cutter. Therefore, in order to improve the abrasion resistance of interlocking concrete block for road, a new mix design was proposed.

• 한국환경복원기술학회지
• /
• 제23권3호
• /
• pp.91-104
• /
• 2020

This study was conducted to analyze the characteristics of defects according to the type of block and spatial type by quantitatively examining defects occurring in block pavement in apartment complex. According to the research results, depending on the type of block, defects have occurred 1,394.3ea/100㎡ in interlocking paver blocks, 464.8ea/100㎡ in clay brick paver blocks, and 235.1ea/100㎡ in shot blasted paver blocks. By space type, the defects were occurred 1,576.0ea/100㎡ on the access road paved by interlocking paver blocks and the defects were found 1,139.6ea/100㎡ in interlocking paver blocks, 235.1ea/100㎡ in shot blasted paver blocks, and 797.1ea/100㎡ in clay brick paver blocks, on the sidewalk. Also the defects are occurred 455.6ea/100㎡ on the resting space and 403.2ea/100㎡ on the gym space paved by clay brick paver blocks. Through the size analysis of the defects in the block paver, in the case 'peeling', the largest volume of 2,539.0㎣ on the sidewalk paved with shot blasted paver blocks, and 'Subsidence' occurred at the widest area of 2,096.0㎠ on the sidewalk where interlocking paver block was constructed. The difference in defect occurrence according to the type of block is considered to be influenced by the block production process, and the space type is considered to be caused the difference in the occurrence of defects according to the cause of construction and the usage pattern of residents. This study conducted a survey on defects in block and analyzed the defect characteristic according to paver material and space type. Base on this, it is judged that it can be used as an efficient basic data for material replacement, improvement, paver planning and construction in the future.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.255-261
• /
• 2007

In this paper we introduce the method, procedure and result of RAM prediction for interlocking system which is applied for AREX signaling system. For RAM prediction, we breakdown the interlocking system to the LRU level and select the LRUs of which failure can cause the service delay. The prediction of reliability is based on the Reliability Block Diagram which is the functional diagram composed of selected LRUs and finally, the availability of interlocking system is estimated from the combination of reliability and maintainability.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.327-332
• /
• 2003

The incinerated municipal waste can be classified into two general types of ash; fly ash and bottom ash. The fly ash is appointed as specified waste, because it contains harmful heavy metals, ie Pb , Cd, etc. more than permitted standard index. The purpose of this study is to manufacture the non-sintering artificial aggregates using municipal waste incineration fly-ash and to evaluate their applications as coarse aggregates in concrete interlocking block. The test results of water absorpsion, strengths of the concrete block using artificial aggregates showed that the artificial aggregates could be used in part of 10-20% as coarse aggregate in concrete block.

• 한국해안·해양공학회논문집
• /
• 제33권3호
• /
• pp.131-138
• /
• 2021

소파블록은 제체의 보호와 파랑에너지 소산을 목적으로 사용되므로 피복된 블록의 안정성을 평가하는 것은 매우 중요하다. 소파블록의 안정성은 주로 수리모형실험으로부터 산정되는 안정계수를 통해 평가되어 왔다. 본 연구에서는 새로운 형태의 소파블록인 K-블록을 활용하여 블록의 맞물림 효과를 포함한 안정성 평가를 위해 인발력에 기반한 새로운 안정성 실험방법을 제시하였다. 소파블록의 인발 실험은 일정 경사면 소파블록을 설치하고 수직 및 수평 방향으로 인장력을 작용시켜 사면 상의 피복층으로부터 블록이 분리되는데 필요한 힘을 직접 계측하는 방법이다. 제안된 실험방법은 소파블록의 맞물림 효과를 정량적으로 평가할 수 있음을 확인하였으며, 맞물림 영향에 의한 단층 피복블록(K-블록)의 높은 안정성을 검증하였다.