References
- American Society for Testing and Materials, 2011. Standard Specification for Concrete Aggregates. ASTM C 33
- American Society for Testing and Materials, 2011. Standard Specification for Masonry Mortar. ASTM C 144
- Cho, Y. H,. 2011. Improvement of Eco Porous Block Pavement. Final Report. Sidewalk Improvement Division, Seoul Metropolitan Government
- Choi, G., Kim, J. H. and Kim, G. H., 1992. Research on the Roughness Characteristic of Pavement. Korea Expressway Corporation, Research Report.
- Hein, D. K. and Smith, D. R., 2009, Life-Cycle Cost Comparison for Municipal Road Pavements. 9th. International Conference on Concrete Block Paving, Argentinean
- Huurman, M., 1997. Permanent Deformation in Concrete Block Pavements. PhD thesis, Delft Univ. of Technology, Delft, The Netherlands. ISBN: 90-9011184-0
- Interlocking Concrete Pavement Institute, Tech Spec No. 13, 2004. Slip and Skid Resistance of Interlocking Concrete Pavements
- International Organization for Standards, 2003. Tyres ? Coast - by Methods for Measurement of Tyre - to - Road Sound Emission. ISO 13325
- Karasawa, A., 2010. Evaluation of Long-Term Performance and LCC for Interlocking Block Pavement, 28th Japan Road Congress
- Kanzaki, N., Ohmori, Y. and Ishimura, S., 1984. The Use of Interlocking Block Pavements for the Reduction of Traffic Accidents. Proceedings of the Second International Conference on Concrete Block Paving, University of Delft, the Netherlands, pp. 200-206.
- Knol, J. 2009. The Powerful Possibilities of Small Element Pavement for Designers of Public Space. 9th. International Conference on Concrete Block Paving. Buenos Aires, Argentina, 2009/10/18-21
- Korea Standard Association, 2009. Concrete Interlocking Block for Sidewalk and Road, KS F 4419 : 2009
- Sadanori, M., 1998. Characteristic of Interlocking Block Pavement Applied on Road with Seasonal Variation. Tohoku Institute of Technology, Pavement 1998. v.6
- Sandberg, U. and Ejsmont, J. A., 2002. Tyre/Road Noise Reference Book, Informex Ejsmont & Sandberg Handelsbolag, Harh, Kisa, Sweden, ISBN 91-631-2610-9.
- Sayers, M. W., Gillespie, T. D. and Paterson, W. D. O., 1986. Guidelines for the Conduct and Calibration of Road Roughness Measurements. World Bank Technical Paper No. 46, The World Bank, Washington, D.C.
- Shackel, B. and Pearson, A., 2001. Concrete Segmental Paving - Maintenance Guide. Concrete Masonry Association of Australia, ISBN: 0 909407 47 9
- Takeyuki, K., Yutaka, A., Takashi, H., Masakazu, M., Hideki, T., Masatoshi, N. and Minako, N., 2009. Study on Heat Island Mitigation on Interlocking Block Pavement, 9th. International Conference on Concrete Block Paving. Buenos Aires, Argentina, 2009/10/18-21
- Wallman, C. G. and Astrom, H., 2001. Friction Measurement Methods and The Correlation Between Road Friction and Traffic Safety. Swedish National Road and Transport Research Institute, VTI meddelande 911A
- Wu, Z. S., 1994. Impact-Benefit Analysis of Permeable Pavement, Taiwan National Central University, Master Degree Thesis