• Journal of the Korean Home Economics Association
• /
• v.40 no.7
• /
• pp.15-24
• /
• 2002

In this work, the effect of fusible interlining on the appearance related properties and mechanical characteristics of Lyocell fabric after fusing was investigated. Two different types(20's and 10's) of Lyocell face fabric with six different interlining(by thickness and structure) for earth Lyocell fabric were examined. In order to establish the optimum fusing condition for the different face fabric and interlining, peel strength of each fused fabric was measured, which was dependent on the fusing temperature, pressure, and time. The characteristics related appearance and mechanical characteristics of each fused fabric were determined. The results are as follows: The peel strength was excellent, when the fabric was fused with the force of 3kgf/$textrm{cm}^2$ at $120^{\circ}C$ for 15seconds. Flex stiffness, G, 2HG, 2HG5(shear), B, 2HB(bending) of 100% Lyocell fabric 10's were higher than those of 100% Lyocell 20's. Flex stiffness, crease recovery, G, 2HG, B, 2HB of thicker woven interlining were higher than those of thinner woven interlining. Crease recovery of twill interlining were higher than those of plain interlining. In case of shear and bending properties, however, plain interlining was higher than twill interlining. Flex stiffness, crease recovery, G, 2HG, 2HG5, B, 2HB of nonwoven interlining were higher than those of woven interlining. In case of drapability, however, woven interlining was higher than nonwoven interlining.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.7
• /
• pp.1193-1202
• /
• 2001

The goal of this research is to investigate the effect of fusible interlinings on the mechanical characteristics and appearance related values for the Lyocell fabrics. In this study, to establish optimum fusing conditions, peel strength of the fused fabrics depending on the fusing temperature, pressure and time was measured. Appearance related properties and mechanical characteristics of the fused fabrics ere determined. The reulst are as follows: In the fusing condition of $120^{\circ}C,\;3kgf/textrm{cm}^2$, 15sec, peel strength was excellent. Peel strength was excellent in the case of tencel/cotton fabric, with increasing cover factor of woven interlining, with twill and nonwoven interlining. Flex stiffness was increased in the case of tencel/cotton fabric, with increasing weight of woven interlining, with twill and nonwoven interlining. Drapability was excellent in the case of 100% tencel fabric, with decreasing weight of woven interlining, with plain and woven interlining. Crease recovery was excellent in the case of 100% tencel fabric, with increasing weight of woven interlining, with twill and woven interlining. Shear and bend properties were increased in the case of tencel/cotton fabric, with increasing weight of woven interlining, with plain and nonwoven interlining.

• Fashion & Textile Research Journal
• /
• v.8 no.5
• /
• pp.585-590
• /
• 2006

In the variation of physical properties of adhesive fabrics, the objective of this study is to analyze fitness of fusible interlining to four sorts of fabrics for men's suit with various structural parameters. Four fusible interlinings are used for adhering to fabrics for men's suit. Mechanical properties of these 16 adhesive fabrics fused with these interlinings are measured by KES-FB system for analysing appearance and wearing properties of garments and for examining the fitness of fusible interlining to the fabrics for men's suit. The variation of bending property for adhesive fabrics are found to be higher in the order of interlining 1(Cotton30/Rayon70, plain), interlining 2(Polyester30/Rayon70, warp knit), interlining 4(Polyester, shingosen fabrics with drawing textured yarn) and interlining 3(Polyester, double dot coating interlining). The variation of adhesive effect shows the same results with bending property and shows negative relation with extensibility in weft direction per extensibility in warp direction(EM2/EM1). The variation of peel strength of adhesive fabrics, woolen fabrics in the case of face fabrics and interlining 3 in the case of interlining shows the largest value respectively.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.12 s.159
• /
• pp.1683-1689
• /
• 2006

Precedent researches on lyocell are mostly on lyocell structure, characteristics, physical properties by finishing and dyeability, and the like; there are little cases of researches on interlining for lyocell clothes production. To serve as a base information helpful to select fusible interlining and improve the efficiency of sewing process considering the characteristics of lyocell, this study performed t-est, F-test toward to the difference in the appearance-related properties and the mechanical properties of lyocell-interlining bonded fabric in accordance with the characteristics of fusible interlining and lyocell face fabric. This study reached following conclusions. Drapability and Crease recovery of lyocell-interlining bonded fabric are influenced by the structure of fusible interlining; stiffness of lyocell-interlining bonded fabric, by the structure of fusible interlining and the yam number of lyocell face fabric. WT is influenced by the mixture rate and yam number of lyocell face fabric. RT is influenced by the yam number of lyocell face fabric; G, 2HG, 2HG5, by the structure(woven and non-woven) of fusible interlining; B, HB, by the weight, structure(woven and non-woven) of fusible interlining, and yam number of lyocell face fabric; WC, by the weight, structure of fusible interlining; RC, by the structure of fusible interlining; thickness, by the weight of fusible interlining and the yarn number of lyocell face fabric; weight, by mixture rate and yam number of lyocell face fabric.

• Fashion & Textile Research Journal
• /
• v.16 no.6
• /
• pp.1008-1016
• /
• 2014

This study aims to analyze the changes in the mechanical properties of woven fabrics(cotton, linen, wool, silk, and polyester) by bonding fusible interlinings with varying deniers(10D, 20D, and 30D) for a 3D virtual try-on system(one that a user to try garments through screens using Avatar) developed over the last decade. We experimented with four mechanical properties and thicknesses of twenty-three specimens of interlining bonded fabrics including face fabrics and interlinings by using the KES-FB-AUTO system. The results showed that the tensile property increased(LT and RT increased and WT decreased) as the denier of the interlining increased; however, the change was slight. In contrast, the bending and shear properties increased significantly as the denier of the interlining increased on both the warp and the weft. This showed evidence that the interlining gives the fabrics size stability. The compression property was slight changed as the tensile property varies depending on the fibers and the denier of interlining. As expected, the thickness increased by bonding the interlining as the denier of interlining increased. From these results, we conclude that 3D users need to reflect these changes of woven fabrics by bonding interlinings when they try screen fittings to accurately express the fabric reality of manufactured garment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.6 no.1
• /
• pp.17-26
• /
• 1982

This article aims to determine the interrelation among exfoliation strength, the repeated laundry number, the coefficient of friction and the cover factor about the fusible interlining produced by using different amount resin. The practicality of stiffness and warmth of the fusible interling were examined. The results are summarized as follows: 1) As a factor that affecting the exfoliation strength of fusible interlining, the coefficient of friction and the cover factor about the fusible interlining produced by using different amount resin. (2) Regardless of the weight of the resin, the exfoliation strength of fusible interlining declined gradually as the repeated laundry number increased. This tendency arises much more in the case of the filament yarn fabric than in that of the spun yarn fabric. The stability of the exfoliation strength was better, regardless of the increase of the repeated laundry number, when the weight of the weight of the resin was 10 g/$m^2$. (3) The spun yarn fabric, which has more fuzz than the filament yarn fabric, is more suitable for the fabric of fusible interlining. The smaller the cover factor difference between the face cloth and the interlining cloth, the stronger the exfoliation strength. (4) When the stability of the shape is a necessary factor in the consumption of the fusible interlining, a resin weight of 20 g/$m^2$ is the most suitable; however when stiffness and warmth are necessary factors, a resin weight of 10 g/$m^2$ is the most suitable.

• Journal of the Korean Home Economics Association
• /
• v.34 no.5
• /
• pp.41-48
• /
• 1996

The purpose of this paper was to identify bonding strength by laundering methods(dry and wet) of the after laundering of the adhesive interlining. The results of this study were as fallows. 1.As laundery repeated it revealed that the bonding strength was decreased to some degree regardless of the kinds of face cloth, laundering methods & adhesive interlining. 2. Bonding strength of woven adhesive interlining after and before ironing is different by its weave: A1>A3>A2. 3. Bonding strength before cleaing is smaller than that after laundering with ironing. 4. As for laundering methods, while dry cleaning is excellent with little influence on bonding strength. It doesn't deform the shapes of dress, in cases of woven adhesive interlining.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.7
• /
• pp.807-815
• /
• 1998

Functions of interlinings to the shell fabric are to improve the garment formability for a beautiful silhouette and elastic potential to the deformed fabric during wearing, and also are to enhance appearance and wearing properties of garment. The objective of this study is to analyse the thermal properties of nonwoven fusible interlining to the thin worsted fabric with various fabric structural parameters. For the purpose fo this study, eight specimens with various weft yarn twists and weft densities of thin worsted fabrics are prepared. Three nonwoven fusible interlinings with different structure which were made by Nylon/Polyester were used for adhering to the thin worsted fabrics. Thermal properties of these 24 adhesive fabrics fused with 3 nonwoven interlinings are measured by KES-F7 System for analysing the thermal suitability of nonwoven fusible interlinings to the thin worsted fabrics with various fabric structural parameters. And air permeability, which was measured by KES-F8-API, of 24 nonwoven adhesive interlining fabrics was also analysed and discussed with the various kinds of nonwoven interlinings and fabric structural parameters.

• The Research Journal of the Costume Culture
• /
• v.25 no.4
• /
• pp.448-457
• /
• 2017

This study aims to analyze the changes in the mechanical properties of interlock fabrics knitted with three types of fibers (i.e., cotton, wool, and polyester) by bonding fusible interlinings with varying deniers (i.e., 10D, 20D, and 30D) for a 3D virtual try-on system. We experimented with four properties and thicknesses of twelve specimens of interlining bonded knitted fabrics including face fabrics and interlinings. The results showed that the tensile property changed values (i.e., LT increased, and WT and RT decreased) according to the denier of interlinings; however, the change was slight. On the other hand, the bending property increased significantly as the denier of the interlining increased on both the wale and the course. Among shearing properties, the value of G increased as the denier of the interlining increased on both the wale and the weft; however, 2HG decreased. Additionally, changes in the compression property varied according to the fibers and the denier of the interlinings. The thickness of the knitted fabrics increased or decreased slightly by bonding the interlining. based on these results, we conclude that the 3D virtual system users need to reflect these numerical changes of interlock fabrics by bonding interlinings when they perform fitting tasks on the screen to accurately express the to accurately express the manufacturing conditions of the real garment.

• Journal of the Korean Home Economics Association
• /
• v.29 no.2
• /
• pp.35-46
• /
• 1991

After adhering theone-sided non-woven adhesive interlining to the polyester/cotton fabrics and making experiments under the various conditions by L27 Orthogonal Array Table, we examined and analyzed the breaking away strength. The rusults are summarized as follows : 1. The best length of the adhering time is 15 secs. 2. As the adehesive interlining for blouse and jacket, B3 is best 3. The pressure for the adhesion is best under the pressure of 6.2Kg. 4. The temperature for the adhesion is best at 140$^{\circ}C$. 5. As for the direction of the adhesion, three directions appear much the same breaking away strength. 6. For the better adhesion power, if the less adhering power, if the less adhering pressure is applied, the adhering time must be extended(15-20 secs), and if much stronger adhering pressure is applied, the time must be shortened(10-15 secs). In general, it is the best way for the adhesion to apply under the pressure of 6.2Kg, for 15 secs long, and at 140$^{\circ}C$ of the adhering temperature.