• Fire Science and Engineering
• /
• v.34 no.2
• /
• pp.14-21
• /
• 2020

This paper presents the study of a fire risk to the backside of two miniatures of ISO 9705 2/5 using a lightweight partition for indoor space division and reproduction of the ISO 9705 test. An SGP partition, stud partition, glass wool panel, urethane foam panel, sandwich panel, and glass partition were selected as the test specimens, which are frequently used in construction. According to the ISO 9705 test standard, stabilization was achieved using a measuring device that recorded data before the ignition of a burner and continued recording for 120 s thereafter. After ignition was achieved, the power was increased to 300 kW for 600 s and then reduced to 100 kW for 600 s. The specimens were subsequently observed for 180 s, and the fire risk to the backside and the fire pattern of the wall unit were analyzed. Owing to the amount of heat generated by the ignition source, the maximum temperature of the backside was observed to be 67.7 ℃ for the SGP partition, 55.1 ℃ for the stud partition, 52.4 ℃ for the glass wool panel, 727.4 ℃ for the sandwich panel, 561 ℃ for the urethane foam panel, and 630.5 ℃ for the glass partition. In the cases of the sandwich and urethane foam panels, the explosion of flammable gas occurred by virtue of fusion of the interior materials. The reinforced glass was fractured owing to the temperature difference between the heat- and nonheat-responsive parts. Ultimately, the fire risk to the nearby section room was deemed to be high.

• International Commerce and Information Review
• /
• v.18 no.4
• /
• pp.81-112
• /
• 2016

About 60 percent of cosmetic products sold in the dominant Taobao internet shopping mall proved recently to be counterfeit products made in China. This paper is to investigate the anti-counterfeiting strategies to clean up fake goods for Korean cosmetics which have been exported to China. Using the scienter rule the paper classified the forgery action for Korean cosmetics into four broad groups - counterfeit, piracy, illegally distributed product, and brand prior register. This paper suggested interior company's anti-counterfeiting strategies for each group, focusing on the construction for an integrated anti-counterfeiting system including consumer's rationality through the government cooperation between Korea and China.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.655-663
• /
• 2016

Increasing green house gas and it consequent climate change problems are discussed as a global issue. Accordingly, future local green house gas emission will increase up to 40% of the entire local green house gas emission and therefore, efforts to reduce the emission in construction industry is urgently required. Therefore, in this study, heating energy demand was analyzed by using the EnergyPlus simulation according to wood material finishes configuration. EnergyPlus has the entry for a variety of buildings and heating, ventilation, air conditioning (HAVC) system components, in particular buildings, air conditioning systems, and performs simultaneous integrated calculated through the feedback between the heat source unit, a verification program according to the ASHRAE Standard 140-2007 to be. The climate data for the simulation we used the data IWEC in Incheon and Gwangju provided by EnergyPlus. The analysis of simulation model was farm and fishing house standard design drawings: 2012, presented at the Korea Rural Community Corporation. The results of simulation of central region and southern region were effected by wood products of simulation model into the interior finish, exterior finish, windows, wooden structure. Also, it was confirmed that the reduced heating energy demand.

• Journal of Environmental Policy
• /
• v.10 no.3
• /
• pp.21-48
• /
• 2011

The paper affirms the weight proportion concept as an element, which could be empirically analyzed quantitatively through the developmental expansion of qualitative empirical analysis on taxonomy that is required for the construction Low-Carbon Green Cities and their eco-friendly elements, such as a pleasant residential environment The weight proportion concept is proposed as a new measure to identify eco-friendly elements and as an objective assessment indicators. To perform an empirical analysis, surveys were first given to the residents of Metropolitan Newtown (50 persons) and outside experts (50 persons) for the total of 100 persons. Second, the paper surveyed 74 sites of Eco-Environmental Certified Apartment Housing Complexes. Upon analysis of eco-friendly elements by their type and total weight, the largest weight proportion was expressed in the interior and eco-environmental elements, carbon-decrease types, and carbon-absorption types. The results of this paper confirm recent positive sentiments and preference toward a variety of future-oriented and sustainable eco-friendly elements like the eco-housing and new renewable energy, In addition, the paper affirmed the new housing trend towards constructing eco-friendly elements, such as carbon-decrease and carbon-absorption, that induce long-term investments, despite their need for higher investments.

• Journal of Families and Better Life
• /
• v.19 no.4
• /
• pp.49-68
• /
• 2001

The purpose of this study was 1) to review communal housing in the UK, 2) to consider the policy implications for elderly communal housing in Korea. The research methods used were 1) literature review about communal housing and related policy in the UK 2) field survey in the UK 3) interpretative suggestion for the proper policy implication to develope communal housing for the elderly in Korea. Sheltered housing in the UK had been developed as communal housing for the elderly with special needs since the 1970s. The type of sheltered housing were category 1 and category 2. Very sheltered housing with more facilities and meal services was added in 1980s. Sheltered housing was evaluated as the most humanistic solution for older people in the UK in 1980s. Because of the policy of moving institutional care to community care, sheltered housing became less in demand because of more options for older people including being able to stay in their own home. So new completion of sheltered housing by registered social landlords reduced saliently. Sheltered housing already totalled over half million units in which 5% of all elderly over 65 still lived and a small quantity of private sector for sale schemes emerged in the 1990s. The reason why the residents moved to sheltered housing was for sociable, secure, and manageable living arrangements. In general the residents were satisfied with these characteristics but dissatisfied with the service charge and quality of meals, especially in category 2.5 schemes. The degree of utilisation of communal spaces and facilities depended on the wardens ability and enthusiasm. Evaluation of sheltered housing indicated several problems such as wardens duty as a \"good neighbour\" ; difficult-to-let problems with poor location or individual units of bedsittiing type with shared bathroom ; and the under use of communal spaces and facilities. Some ideas to solve these problems were suggested by researchers through expanding wardens duty as a professional, opening the scheme to the public, improving interior standards, and accepting non-elderly applicants who need support. Some researchers insisted continuing development of sheltered housing, but higher standards must be considered for the minority who want to live in communal living arrangement. Recently, enhanced sheltered housing with greater involvement of relatives and with tied up policy in registration and funding suggested as an alternative for residential care. In conclusion, the rights of choice for older people should be policy support for special needs housing. Elderly communal housing, especially a model similar to sheltered housing category 2 with at least 1 meal a day might be recommended for a Korean Model. For special needs housing development either for rent or for sale, participation of the public sector and long term and low interest financial support for the private sector must be developed in Korea. Providing a system for scheme managers to train and retrain must be encouraged. The professional ability of the scheme manager to plan and to deliver services might be the most important factor for the success of elderly communal housing projects in Korea. In addition the expansion of a public health care service, the development of leisure programs in Senior Citizens Centre, home helper both for the elderly in communal housing and the elderly in mainstream housing of the community as well. Providing of elderly communal housing through the modified general Construction Act rather than the present Elderly Welfare Act might be more helpful to encourage the access of general people in Korea. in Korea.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.3
• /
• pp.56-67
• /
• 1987

Plywoods used for construction as a decorative interior material are inflammable and can make fire accidents, causing destruction of human life and property. Therefore, it is indeed required to make fire-retardant treated plywood. In this study, 3.7mm yellow meranti plywoods were soaked in 18% boric acid solutions and tap water by hot-cold bath for 1/2, 2/2, 4/2, 6/2 hours and redrying of treated plywoods was carried out by press drying at the platen temperature of 110, 130, 160, $180^{\circ}C$ and then it was conducted to investigate solution absorption, drying rates, dynamic young's modulus. specific gravity and fire-retardant factors such as burning point, flame spread length. flame exhausted time, back side carbonized area and weight loss by treating time, treating solutions and platen temperature. The results are as follows; 1. When plywood was impregnated with the hot bath temperature of $70^{\circ}C$ for 1. 2, 4, 6 hours and the cold bath temperature of $15^{\circ}C$ for 2 hours respectively, retentions of boric acid were 1.565, l.597, 1.643, 1.709kg/$(30cm)^3$ and all of them exceeded the minimum retention [1.125kg/$(30cm)^3$] even in the shortest treatment. 2. In hot-cold bath method for 1/2 hours, the drying rates of treated plywood remarkably increased with the extension of platen temperature of 110, 130, 160, $180^{\circ}C$ and the values of boric acid treated plywood were 5.900, 10.196, 45.42, 54.958m.c%/min and the values of water treated plywood were 6.014, 12.373, 46.520, 55.730m.c%/min and drying rates of water treated plywood were faster than those of boric acid treated plywood. 3. The values of boric acid treated plywoods in dynamic young's modulus were widely higher than those of water treated plywoods. And it can be observed that there were highly significant differences for treating time between dynamic young's modulus, and the values of boric acid plywoods increased with the extension of treating time but on the contrary water treated plywoods were decreased values with prolonged time 4. It was observed that there were highly significant differences for platen temperature between dynamic young's modulus. When the values of water treated plywoods in dyna nic young's modulus were abruptly decreased according to the rise of platen temperature. boric acid treated plywoods showed rather increased values at $160^{\circ}C$ of platen temperature. And in 2- way interactions, there were also highly significant for dynamic young's modulus between treating time x treating solutions and platen temperature x treating solutions. 5. Correlation coefficients of fire-retardant factors were shown in table 5. It could be recognized that there were close correlations between the treating solutions and burning point, flame spread length, back side carbonized area, flame exhausted time and weight loss, but there was no correlation between fire-retardant factors and treating time and platen temperature. 6. From table 6, it can be observed that there were highly significant differences for burning point, flame spread length, flame exhausted time, back side carbonized area, weight loss between treating solutions. And in 2-way interactions, there were highly significant for burning point, flame spread length, weight loss between treating time $\times$ treating solutions.

• Journal of Korea Port Economic Association
• /
• v.29 no.4
• /
• pp.119-134
• /
• 2013

Korea has established the MOMAF (Ministry of Maritime Affairs and Fisheries) in 1996 while only a few countries have adopted the unified management system for the area of maritime, oceans and fisheries affairs. The Ministry has been broken up to three parts of maritime affairs, oceans and fisheries and allocated to each related ministries in 2008, and reorganized as the Ministry of Oceans and Fisheries including maritime affairs in 2013. However, the newly established MOF (Ministry of Oceans and Fisheries) has been evaluated as simply duplicated the former organization so as not to meet the oceanic environmental changes. This paper aims to suggest the appropriated organizational reinforcements measures on the basis of analysis of questionnaire survey which has been conducted targeting experts such as academic researchers and industry field players in the area of oceans, maritime and fisheries. The survey pointed out mainly five scopes such as (1) transferring the administrative task of shipbuilding and plant industries from the existing Ministry to the MOF, (2) reinforcing the structural functions of maritime, port construction and logistics affairs, (3) collaboration system with related Ministries for the ocean sovereignty, (4) securing the financial support system for the maritime industries, (5) transferring the management authority of maritime and ocean universities from the existing Ministry to the MOF. Looking back on the interministerial interest conflicts, it is very difficult to agree on the transfer of the existing task of above first and fifth suggestions. But the remain three suggestions could be done with interior abilities of the MOF by means of structural changes and professional manpower supplement.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.4
• /
• pp.61-71
• /
• 2010

Five half-scale beam-to-column connections in a precast concrete frame were tested with cyclic loading that simulated earthquake-type motions. Five half -scale interior beam-column assemblies representing a portion of a frame subjected to simulated seismic loading were tested, including one monolithic specimen and four precast specimens. Variables included the detailing used at the joint to achieve a structural continuity of the beam reinforcement, and the type of special reinforcement in the connection (whether ECC or transverse reinforcement). The specimen design followed the strong-column-weak-beam concept. The beam reinforcement was purposely designed and detailed to develop plastic hinges at the beam and to impose large inelastic shear force demands into the joint. The joint performance was evaluated on the basis of connection strength, stiffness, energy dissipation, and drift capacity. From the test results, the plastic hinges at the beam controlled the specimen failure. In general, the performance of the beam-to-column connections was satisfactory. The joint strength was 1.15 times of that expected for monolithic reinforced concrete construction. The specimen behavior was ductile due to tensile deformability by ECC and the yielding steel plate, while the strength was nearly constant up to a drift of 3.5 percent.

• Korean Journal of Environment and Ecology
• /
• v.26 no.6
• /
• pp.952-959
• /
• 2012

This study examined habitat fragmentation that has occurred in Paju and Yeoncheon, the two border municipalities between North and South Korea in Gyeonggi-do (province) during the last 17 years using various landscape metrics. We 1) classified grass and agricultural habitats and forest habitats from two Landsat TM images collected in 1990 and 2007, and 2) compared the percentage of class area, patch density, mean patch area, and mean perimeter area ratio for the two habitat types between the two time points. Both types of habitats has been severely fragmented due to urban development in the last 17 years. The increased patch density and decreased mean habitat area are attributed to the construction of roads and railroads that separate a large habitat to many small pieces. The increased mean perimeter area ratio also indicates that the habitat fragmentation extended areas that are affected by the edge effect and so less suitable for interior species. A habitat conservation plan is urgently needed to minimize habitat fragmentation from developments that are expected to soon occur in the north and south Korean border.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.4
• /
• pp.39-45
• /
• 1995

The plywoods commonly used as decorative interior materials for the construction are inflammable and so it is a causative factor for making fire accidents, resulting in the destruction of human life and personal properties. Indeed, it is, therefore, required to produce fire-retardant plywoods. In this study, a special grade of defect-free, Kapur plywood was used. Specimens were cut into 3- by 20cm dimensions from 120- by 240- by 0.33-cm panels(thin panel) or 120- by 240- by 0.5-cm panels(thick panel). Some specimens were treated with diammonium phosphate(DAP), but some were not treated with diammonium phosphate to use as control panels. Chemical absorption, drying curves, drying rates and dynamic Young's modulus were investigated. The results were summaries as follows; 1. The specimens were soaked into 19% diammonium phosphate solution by a full cell pressure process and the diammonium phosphate retained in the thin and thick plywoods was 1.409kg/$(30cm)^3$, 1.487kg/$(30cm)^3$, respectively. 2. Diammonium phosphate-treated plywoods were redried with press-drying process at one of either condition dried on the platen($115^{\circ}C$) for a period of time or dried on the platen($50^{\circ}C$) for 3 hrs plus in a dry-oven($30^{\circ}C$) for 24 hrs. or dried on the platen($60^{\circ}C$) for 2 hrs plus in a dry-oven($30^{\circ}C$) for 24 hrs. The drying rate of treated thin specimens dried at $60^{\circ}C$ plus $30^{\circ}C$ and $115^{\circ}C$ only was found to be 0.04 %/min. and 8.53 %/min. Similarly, the drying rate of treated thick specimens were 0.03 %/min. and 6.77 %/min. respectively. 3. It was evident that highly-significantly different drying rate of treated plywoods was observed between plywood thicknesses and platen temperatures and the rate was increased by elevating the platen temperature up to $115^{\circ}C$. Based on the two-way variance analysis, highly significant drying rate was observed from the interaction between plywood thicknesses and platen temperatures. 4. After redrying, the specimens were weighed and reconditioned to a constant weight in a facility maintained temperature ($20^{\circ}C$) and relative humidity(65%) prior to test dynamic Young's modulus. The test revealed that the thin specimens dried at the platen temperature of $50^{\circ}C$, $60^{\circ}C$, $115^{\circ}C$ and untreated specimens showed 1.070E+09 dyne/$cm^2$, 1.156E+09 dyne/$cm^2$, 1.243E+09 dyne/$cm^2$, and 1.052E+09 dyne/$cm^2$, respectively. Likewise, the thick specimens revealed 5.647E+09 dyne/$cm^2$ 5.670E+09 dyne/$cm^2$, 6.395E+09 dyne/$cm^2$ and 5.415E+09 dyne/$cm^2$, respectively. 5. It was evident that significantly different dynamic Young's modulus was observed between the plywood thickness and the platen temperature, but not in the two-way interaction between the plywood thickness${\times}$the platen temperature.