• Analytical Science and Technology
• /
• v.20 no.1
• /
• pp.41-48
• /
• 2007

The determination method for the trace lead and cadmium in glass materials was developed by ICP-AES. The lead- and cadmium-DDTC chelates were formed by adding Na-DDTC (sodium diethyldithiocarbamate) as a chelating agent and extracted into MIBK (methyl-isobutyl ketone). Direct measuring of the trace lead and cadmium in glass was not possible because of the interferences of matrix elements as Na, Si, Mg and Ca of glasses unless solvent extraction of lead and cadmium was applied. This procedure was confirmed to be valid quantitative method of Pb and Cd analysis in glass did not influence of sample matrix, by applying it procedure to artifact sample and NIST SRM 1412.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.6
• /
• pp.520-525
• /
• 2009

The conventional studies about an adaptive beamformer assumed that the interference signals are stationary, so they used time-average of signals or Least Mean Squares. However, these methods showed low performance of canceling the non-stationary interferences. In this paper, the MAFF-RLS algorithm is developed in order to cancel non-stationary interferences, and the GSC structure using this algorithm is proposed. Furthermore, the performance of the MAFF-RLS beamformer is verified by simulation using MATLAB. This simulation results show the performance of the proposed beamformer is better than that of the SMI and the conventional RLS beamformer.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.2
• /
• pp.87-91
• /
• 2008

In this paper, the adaptive chirp beamforming method is proposed to solve the bias problem in the direction-of-arrivals (DOAs) estimation of the wideband chirp signals which have an identical time-frequency parameter and are emanated from different directions. The source location bias results from the interferences impinging on the array from the other directions. The proposed method exploits the time-frequency structure of the chirp signal based on STMV (STeered Minimum Valiance) to improve the DOA estimation performance by minimizing the chirp interferences effectively. Simulation results show the DOA estimation performance achieved by the proposed method as compared to the conventional methods.

• Analytical Science and Technology
• /
• v.28 no.6
• /
• pp.409-416
• /
• 2015

ICP-AES has been used in many laboratories due to the advantages of wide calibration range and multi-element analysis, but it may give erroneous results and suffer from spectral interference due to the large number of emission lines associated with each element. In this study, certified reference materials (CRMs) and field samples were analyzed by ICP-AES and HG-AAS according to the official Korean testing method for soil pollution to investigate analytical problems. The applicability of HG-ICP-AES was also tested as an alternative method. HG-AAS showed good accuracies (90.8~106.3%) in all CRMs, while ICP-AES deviated from the desired range in CRMs with low arsenic and high Fe/Al. The accuracy in CRM030 was estimated as below 39% at the wavelength of 193.696 nm by ICP-AES. Significant partial overlaps and sloping background interferences were observed near to 193.696 nm with the presence of 50 mg/L Fe and Al. Most CRMs were quantified with few or no interferences of Fe and Al at 188.980 nm. ICP-AES properly assessed low and high level arsenic for field samples, at 188.980 nm and 193.696 nm, respectively. The importance of the choice of measurement wavelengths corresponding to relative arsenic level should be noted. Because interferences were affected by the sample matrix, operation conditions and instrument figures, the analysts were required to consider spectral interferences and compare the analytical performance of the recommended wavelengths. HG-ICP-AES was evaluated as a suitable alternative method for ICP-AES due to improvement of the detection limit, wide calibration ranges, and reduced spectral interferences by HG.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.8
• /
• pp.99-107
• /
• 2010

In a single frequency network (SFN) for Advanced Television Systems Committee (ATSC) terrestrial digital television (DTV) system, the interferences induced by the multiple transmitters and/or repeaters using the same frequency are inevitable. Since the presence of interferences results in performance degradation of the SFN, it is crucial to manipulate the interferences by adjusting the transmit power and timing of each transmitter and repeater. In the ATSC terrestrial DTV system, in order to facilitate the interference manipulation process, a transmitter identification (TxID) signal which is uniquely embedded in the signal to be transmitted from each transmitter and repeater is recommended. Even though the injection level of the TxID signal is much lower than the DTV signal, the TxID signal injection infects the DTV signal. Hence, the effect of the TxID signal on the DTV signal must be investigated before deployment. In this paper, the effect of the TxID signal on the performance of legacy DTV receivers under additive white Gaussian noise and multipath channel environments is investigated not only with computer simulation but also with laboratory and field tests. The test results show that the average threshold of visibility degradation of the legacy DTV receivers due to the TxID signal injection is less than 0.2 dB at the TxID injection level of -30 dB.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.1
• /
• pp.1-6
• /
• 2003

This paper analyses the performance of either the minimum variance distortionless response (MVDR) or the recursive least square (RLS) beamformer structured on the systolic array. Provided that the snapshot vector including the desired user's signal and the interferences with the noise is received at the array antenna. In order to improve the quality of received signal, MVDR or RLS algorithm can be utilized to update the beamformer weights recursively. Furthermore to increase the channel capacity, by the usage of the above schemes, the effect of the spatial filtering can be obtained which constructively combining multipath components corresponding to the desired user whereas the multiple access interferences (MAI) is nulled out on spatial domain. This paper introduces the MVDR and RLS beamformer structured on systolic array conducting the spatial filtering, and its performance under the multipath fading channel in the presence of multiple access interferences will be analyzed. To show the superior spatial filtering performances of the proposed scheme employing the systolic way structured beamformer, the computer simulations are carried out. And the validity of practical deployment of the proposed scheme will be confirmed throughout showing the BER behaviors and the beampatterns.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.3
• /
• pp.317-329
• /
• 1998

In this paper, we have analyzed the packet error probability of DS/CDMA-Trellis Coded QPSK modulation signal with MRC(Maximum Ratio Combining) diversity reception in Rician fading, multi-user interferences and multipath channel. And then we have evaluated the performance and capacity of DS/CDMA-Trellis Coded QPSK system using the MRC diversity reception as a function of direct power to indirect power ratio ($K_R$), the number of diversity branch(M), the number of multi-user(U), PN chip rate(PN), the number of multipath channel($L_P$), and packet length(PL). From the results, we know that the coding gain of DS/CDMA-Trellis Coded QPSK system with 2 branch MRC diversity is about 6 dB against uncoded DS/CDMA BPSK system with 2 branch MRC diversity in Rician fading ($K_R=6dB), 5 multi-user interferences, and 3 multipath channel. And, we know that coded QPSK signal designed for the AWGN channel also perform well on a Rician fading channel with MRC diversity reception. Consequently, we expected that proposed system structure is reliable to the wireless data communication system in Rician fading, multi-user interferences, and multipath channel.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.6
• /
• pp.884-893
• /
• 2008

This paper analyzes, through simulations, GNSS interference mitigation performance against wideband and narrowband interferences by using spatial-temporal adaptive processing(STAP). The mathematical analysis results demonstrate that the array configuration has a considerable effect on the spatial-temporal correlation function. Based on the results, different array configurations are presented to evaluate and observe the effect on interference mitigation. The analysis results are further assessed through simulations.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1997.10a
• /
• pp.39-44
• /
• 1997

As wind waves generated in deep water approach nearshore zone, they experience various physical phenomena caused by bathymetric variations, nonlinear interactions among different wave components and interferences with man-made coastal structures. Among these, the bathymetric variations may play a significant role in the change of wave climate. The accurate calculation of reflection and transmission coefficients of incident waves over a bottom topography is indispensible for the proper and economical design of coastal structures. (omitted)

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.2 no.1
• /
• pp.78-87
• /
• 2003

One of the most difficult and important problems associated with radiated electromagnetic emissions from digital devices are the determination of antenna factor and site acceptability of an open area test site. This paper presents the problems of the open area test site and EMC antennas far measuring electromagnetic interferences radiated from the equipements. It seems desirable that the antenna factor of EMC antennas be revised to the antenna factor with zero reflection presented in this paper for accurate measurements.