• International Journal of Naval Architecture and Ocean Engineering
• /
• v.9 no.2
• /
• pp.127-134
• /
• 2017

Vortex Induced Vibration (VIV) is a typical flow-structure interference phenomenon which causes an unsteady flow pattern due to vortex shedding at or near the structure's natural frequency leading to resonant vibrations. VIV may cause premature fatigue failure of marine risers and pipelines. A test model was carried out to investigate the role of a stationary fairing by varying the caudal horn angle to suppress riser VIV taking into account the effect of wake interference. The test results show significant reduction of VIV for risers disposed in tandem and side-by-side. In general, fairing with a caudal horn of $45^{\circ}$ and $60^{\circ}$ are efficient in quelling VIV in risers. The results also reveal fairing can reduce the drag load of risers arranged side-by-side. For the tandem configuration, a fairing can reduce the drag load of an upstream riser, but will enlarge the drag force of the downstream riser.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.1
• /
• pp.7-11
• /
• 2012

One dimensional and two dimensional nano patterns were fabricated on a 4-inch substrate by Laser Interference Lithography (LIL). Mach-Zehnder interferometer was setup to obtain the interference patterns and adjusted the pattern sizes with change of incident angle. We could obtain a periodic structure with a period of 440 nm using 266 nm laser, and demonstrated a pattern size with $293{\pm}25nm$ over a 4-inch substrate.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1234-1238
• /
• 2005

As the low power GPS signal is susceptible to interference, interference can seriously degrade the performance of GPS receiver. This paper designs a ANIEF(Adaptive Narrowband Interference Excision in Frequency domain) filter that removes narrow band interferences with low signal loss. This filter uses the pre-correlation technique and attempts to filter out the interference in the frequency domain. The interference excision performance of the designed filter is evaluated for various interferences using the ANIEF filter inserted GPS software receiver and the interference generator. Interferences considered in this paper are single-tone CWI(Continuous Wave Interference), multi-tones CWI, pulsed CWI, and swept CWI. The narrowband interference excision filter in frequency domain is very effective against various interferences and the strong interference with a simple structure. However, the signal power loss is unavoidable while transforming. In this paper, the hamming window and overlap technique are adopted to reduce the signal power loss. Finally, the interference excision performance and the reduced signal power loss of the ANIEF filter are shown.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.5
• /
• pp.572-582
• /
• 2018

In this paper, we have calculated a formular for sabot-trajectory of shipboard projectile including ship motion and generated trajectory-range function for analysing interference with structure of naval ship. We make formula to approximate the ship motion data of naval ship using optimization technique. Through this formula, we calculate the velocities and accelerations of sabot caused by ship motion(surge, sway, heave, roll, pitch, yaw) and then, we produce the formula about the trajectory of sabot including effects of ship motion in addition to previous study which had considered the effects of the pressure of flume, friction force, etc. To investigate interference with ship structures, we make the trajectory-range functions and then extract the nearest or farthest trajectory to ship structure. Through these data, we can conform whether the interference is happened or not.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9B
• /
• pp.602-609
• /
• 2005

In this paper, the performance of HCS (hierarchical cell structure), which consists of macro-cell and micro-cell, has been analyzed by assuming that the cells in HAPS (high altitude plat(on station) are tessellated to provide wide coverage, control the co-channel interference and give the higher spectrum efficiency. Since the outside-cell interference factor is well blown to analyze the effects of interference between cells, the effects of interference from the micro-cells into the macro-cells has been estimated using the factor as a performance estimation of HCS in HAPS. HCS served by HAPS can be realized by permitting the suitable power control and the proper number of users in micro-cell because the interference from the micro-cell into the macro-cell is not a function of the distance between cells but a function of the power control and the number of users.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.11
• /
• pp.1871-1884
• /
• 1997

This paper describes the design process of a 3-component load cell with a multiple parallel plate structure which may be used to measure transverse forces and twisting moment simultaneously. Also we have derived equations to predict the bending strains on the surface of the beams in the multiple parallel plate structure under transverse force or twisting moment. It reveals that the bending strains calculated from the derived equations are in good agreement with the results from finite element analysis and experiment. Also we have evaluated the rated output and interference error of each component, which can be efficiently used to design a 3-component load cell with a multiple parallel plate structure.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.4
• /
• pp.375-383
• /
• 2012

Together with the GPS-based approach, geolocation through mobile communication networks is a key technology for location-based service. Since the Mobile WiMAX system is considered as a candidate for fourth-generation mobile systems, it is important to investigate its location capability. The geolocation of Mobile WiMAX can be realized when the preamble symbols in the down-link channel are appropriately used for a TDOA (Time-Difference-of-Arrival) approach. However, the cellular structure of Mobile WiMAX inevitably generates co-channel interference, and it is difficult for the mobile terminal to acquire distance measurements from multiple base stations. Therefore, for geolocation via multilateration using the Mobile WiMAX network, it is very important to increase hearability. This paper proposes a geolocation method for Mobile WiMAX which employs interference cancellation and preamble signal overlapping for the enhancement of hearability. A novel interference cancellation strategy for complex-valued Mobile WiMAX signals is presented which has an iterative structure. Simulation results show that the proposed geolocation method provides the user's position with an accuracy of less than 20 m through the Mobile WiMAX cellular network if there is no multi-path or NLOS (None-Line-of-Sight).

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.5
• /
• pp.111-116
• /
• 2008

Radar system must estimate exactly quickness and target in interference channel. Because interference of radio channel is multipath channel by artificial structure and nature structure. signal estimation is difficult. As long as, get rid of interference signal have been study digital beamforming, adaptive array antenna and so on. In this paper, proposed SPT-SALCMV beamforming algorithm get rid of coherent interference algorithm and adaptive array antenna. Adaptive array forms null pattern and reduces gains for direction of interference signal. And estimate signal that want by keeping gains of beam pattern changelessly to target signal direction. In this paper, proposed SPT-SALCMV algorithm was exactly received position of target. But general SPT-LCMV algorithm resulted beam error about 30degrees. Therefore, proved that SPT-SALCMV algerian that propose in this paper is more excellent than genaral SPT-LCMV algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.6
• /
• pp.1014-1023
• /
• 2015

This paper presents the method of antenna polarization isolation and resource control for frequency interference reduction due to the frequency reuse between opposite sectors. We have examined the frequency interference between opposite sectors which is occurred by operating base station for reducing frequency interference. The base station has a frequency reusing structure in opposite sector. So, the base station can make a in-band frequency interference. In order to minimize frequency interference, we proposed two methods. The first is the antenna polarization isolation method. The CINR was improved to 27dB from 17dB when using the antenna polarization isolation. The second is resource control which is the method for lining up the RF power and limiting RF power control range of each link. In this paper, by using the proposed two methods, presents a scheme that reduces frequency interference in the frequency reusing structure.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.9
• /
• pp.41-47
• /
• 2017

In this paper, we consider the case where D2D users and the cellular user share the uplink of the cellular system. We propose an iterative power control algorithm that converges to the optimum power value. Each user iteratively updates its transmit power level according to the interference function. Finally, all D2D users and cellular user that participate in the transmission get the optimum transmit power level. We first investigate the interference structure and define the interference function. Then, we show that the considered interference function belongs to the standard interference function that converges the unique transmit power level. Through numerical examples, the convergence of the proposed power control algorithm is examined in the various transmission scenarios.