• 전기학회논문지
• /
• 제58권5호
• /
• pp.1035-1040
• /
• 2009

We propose a new encoder/decoders based on an tune able wavelength converter(TWC) and an arrayed waveguide grating(AWG) router for large capacity optical CDMA networks. The proposed encoder/decoder treats codewords of wavelength/time 2-D code simultaneously using the dynamic code allocation property of the TWC and the cyclic property of the AWG router, and multiple subscribers can share the encoder/decoder in networks. Feasibility of the structure of the proposed encoder/decoder for dynamic code allocation is tested through simulations using two wavelength/time 2-D codes, which are the generalized multi-wavelength prime code(GMWPC) and the generalized multi-wavelength Reed-Solomon code(GMWRSC). Test results show that the proposed encoder/decoder can increase the channel efficiency not only by increasing the number of simultaneous users without any multiple-access interference but by using a relatively short length CDMA codes.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 학술대회 논문집
• /
• pp.405-408
• /
• 2005

This paper presents the characteristics of antenna factors for sleeve dipole antennas with a broad bandwidth. The coupled integral equations for the unknown current distributions on each elements are derived and solved by applying Galerkin's method of moments. The flatness of antenna factor is considered by variation of the length and number of sleeve elements.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권6호
• /
• pp.446-452
• /
• 2004

Under the condition of a common narrowband target signal and interference signals from several directions, the linearly constrained minimum variance (LCMV) method using the generalized sidelobe canceller (GSC) for adaptive beamforming has been exploited successfully However, in the case of wideband signals, the length of the adaptive filter must be extended. As a result, the complexity of the beamformer increases, which makes real-time implementation difficult. In this paper, we improve the convergence characteristics of the adaptive filter using the transform domain normalized least mean square (NLMS) approach based on the subband GSC structure without the increase of complexity. Besides, the M-MAX algorithm, which is one of various selective coefficient updating methods, is employed in order to remarkably reduce the computational cost without decreasing the convergence quality. With the combination of these methods, we propose a computationally efficient wideband adaptive beamformer and verify its efficiency through a series of simulations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.385-387
• /
• 1994

Optical interconnections are more attractive than electronic interconnections because of their higher speed, freedom from planar constraints, immunity to electromagnetic interference effects and higher interconnection capacity. Volume hologram is one of the best way to implement optical interconnections. Diffraction efficiency and crosstalk effect are very important things for ensuring independent interconnections. Recently, a general systematic method that can handle a large number of superposed volume gratings in anisotropic host material is presented. In this study for numerical analysis of diffraction, above method is programmed in general form near Bragg angle. Diffraction orders for variation of grating strength are determined by comparing with the coupled-mode method. The effects of parameter variation are considered. Parameters include vertical and azimuthal incident angle, wavelength and interaction length. Diffraction analyses are also performed for intra-mode and inter-mode diffractions.

• Current Optics and Photonics
• /
• 제3권5호
• /
• pp.451-457
• /
• 2019

Laser processing using holograms can greatly improve processing speed, by spatially distributing the laser energy on the target material. However, it is difficult to reconstruct an image with arrays of closely spaced spots for laser processing, because the specklelike interference pattern prevents the spots from getting close to each other. To resolve this problem, a line target was divided in two, reconstructed with orthogonally polarized beams, and then superposed. Their optical reconstruction was performed by computer-generated holograms and a pulsed laser. With this method, we performed two-dimensional (2D) laser drilling of polyimide film, with a kerf width of $20{\mu}m$ and a total processing length of 20 mm.

• International Journal of Reliability and Applications
• /
• 제16권1호
• /
• pp.35-53
• /
• 2015

This investigation deals with reliability and sensitivity analysis of a repairable embedded system with standby wherein repairman takes multiple vacations. The hardware system consists of 'M' operating and 'S' standby components. The repairman can leave for multiple vacations of random length during its idle time. Whenever any operating unit fails, it is immediately replaced by a standby unit if available. Moreover, governing equations of an embedded system are constructed using appropriate birth-death rates. The vacation and repair time of repairman are exponentially distributed. The matrix method is used to find the steady-state probabilities of the number of failed components in the embedded system as well as other performance measures. Reliability indexes are presented. Further, numerical experiments are carried out for various system characteristics to examine the effects of different parameter. Using a special class of neuro-fuzzy systems i.e. Adaptive Network-based Fuzzy Interference Systems (ANFIS), we also approximate various performance measures. Finally, the conclusions and future research directions are provided.

• Animal Systematics, Evolution and Diversity
• /
• 제38권4호
• /
• pp.205-213
• /
• 2022

A new free-living marine nematode, Chaetonema longicorpus sp. nov., was discovered in a subtidal benthic habitat around the Uljin nuclear power plant in the East Sea. Chaetonema longicorpus sp. nov. differs from other Chaetonema species in its very long body length, relatively long cephalic setae, long and narrow buccal cavity, bottle-shaped amphideal fovea, short spicules, only one pre-cloacal seta instead of a pre-cloacal supplement, and conspicuous ventral swelling at the middle of the tail. Herein, we provide a taxonomic description and illustrations of this new species using differential interference contrast microscopy. Furthermore, an illustrated pictorial key to all valid species, including the new species and comparative tables on the biogeographical and morphological characteristics of the genus Chaetonema, are provided.

• 환경생물
• /
• 제39권4호
• /
• pp.463-470
• /
• 2021

Admirandus multicavus Belogurov and Belogurova, 1979, a new record of free-living marine nematode species belonging to family Oncholaimidae is reported based on the specimens collected from the intertidal sediments of Korea. Admirandus multicavus is characterized by the following unique characteristics: cephalic setae (1-2 ㎛ long), spicules (71-126 ㎛ long) and gubernaculum (15-31 ㎛ long), midventral preanal supplementary organ, three glandular duct openings of the Demanian system, and stoma length measuring twice the width. A comparative analysis of the biogeographical and ecological characteristics of Admirandus species is presented. DIC (Differential interference contrast) photomicrographs of the species are also provided herein. This report represents the first taxonomic analysis of the genus Admirandus Belogurov and Belogurova, 1979 discovered from the Korean seawaters.

• 한국광학회지
• /
• 제13권1호
• /
• pp.32-37
• /
• 2002

두 모드 간섭 현상을 기초로 해서 1.55 $\mu\textrm{m}$ 파장대역에서 동작하는 편광모드 분리기를 Ti: x-cut LiNbO$_3$광도파로 구조를 이용하여 설계, 제작한 다음, TE, TM 입사 모드에 따른 소자의 동작 특성을 측정하였다. 광도파로 폭, 분기각도와 간섭영역 길이를 8$\mu\textrm{m}$, 0.55$^{\circ}$, 470$\mu\textrm{m}$로 제작된 소자의 분리 비는 TE, TM 입사 모드 각각에 대해서 16.18 dB, 21.25 dB로 측정되었으며, 누화는 -16.28 dB, -21.28 dB로 측정되었다. 삽입 손실은 TE, TM 각각에 대하여 2.24 dB/cm, 2.41 dB/cm로 측정되었으며. 30 nm 파장 범위 내에서 비교적 균일한 분리 비가 관찰되었다.

• 한국전자통신학회논문지
• /
• 제6권4호
• /
• pp.473-478
• /
• 2011

본 논문은 유한 접지 도체판 위의 시험장에 대해서 접지 도체판의 edge가 NSA(Normalized Site Attenuation)에 미치는 영향에 대해서 검토하였다. 사용하는 안테나를 광대역 미소다이폴안테나로 가정하여 방사성 방해파의 측정시설로 사용하는 시험장의 크기가 방해파의 측정환경으로 적합한지를 평가하기 위한 기준이 되는 NSA의 이론치를 GTD(Geometric theory of diffraction)법을 적용하여 계산하였다. 본 논문에서는 유한 접지 도체판 위의 송 수신 안테나가 상호 영향을 받지 않을 경우, 접지 도체판의 크기가 NSA에 미치는 영향을 수평편파와 수직편파에 대해서 측정거리 3 m법을 이용하여 고찰 하였다. 수치적으로 검토한 결과, 수평편파에서는 일반적인 규격에서 규정하고 있는 타원평면의 규격 정도의 접지 도체판에서도 edge의 영향을 무시 할 수 있으나, 수직편파의 경우에는 edge의 영향을 1 dB 이하로 줄이기 위해서는 유한 도체 접지판의 크기를 크게 가져가야 한다는 것을 확인하였다.