• 접착 및 계면
• /
• 제23권3호
• /
• pp.59-69
• /
• 2022

섬유강화 복합재료에서 가장 중요한 부분은 섬유와 수지간의 계면 접착특성이다. 본 총설에서는, 섬유강화 복합재료의 계면특성을 평가하기 위해 사용되는 미세역학 시험법에 대해 역사적 초점을 두어 서술하고자 한다. 미세역학 시험법은 섬유 한 가닥과 기지재료 간의 계면 접착특성을 전단력평가로 관측하는 재료자체의 변수만이 고려되는 평가법으로써 계면에 대한 보다 정량적인 접착특성 및 감지능을 고찰할 수 있다. 미세역학시험법을 이용한 이전의 연구와 비교적 최근 연구동향을 본 총설에서 비교 논의하며, 미세역학 실험법에 대한 응용과 앞으로의 발전을 설명하고자 한다.

• 마이크로전자및패키징학회지
• /
• 제21권1호
• /
• pp.45-50
• /
• 2014

반도체 미세구리배선 적용을 위하여 구리배선의 습식 표면처리 및 열 사이클에 따른 구리 박막과 실리콘질화막 도포층 사이의 계면접착에너지를 4점굽힘시험을 통해 정량적으로 평가하였다. 구리배선을 화학적 기계적 연마한 후 습식 표면처리를 통하여 구리 박막과 실리콘질화막의 계면접착에너지는 $10.57J/m^2$에서 $14.87J/m^2$로 증가하였다. $-45{\sim}175^{\circ}C$범위에서 250사이클 후, 표면처리를 하지 않은 시편의 계면접착에너지는 $5.64J/m^2$으로, 표면처리를 한 시편은 $7.34J/m^2$으로 감소하였으며, 모든 시편의 박리계면은 구리 박막과 실리콘질화막 계면으로 확인되었다. X-선 광전자 분광법으로 계면 결합 상태를 분석한 결과, 화학적 기계적 연마 공정 후 구리배선의 표면 산화물이 습식표면처리에 의해 효과적으로 제거된 것을 확인하였다. 또한, 열 사이클 처리동안, 구리 박막과 실리콘질화막의 큰 열 팽창 계수 차이로 인한 열응력으로 인하여 구리 박막과 실리콘질화막 계면이 취약해지고, 계면을 통한 산소유입에 따른 구리 산화층이 증가하여 계면접착에너지가 저하된 것으로 판단된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.390.1-390.1
• /
• 2016

The present work explains the interfacial energetics of all oxide transparent photodiodes. The optical, structural and morphological of copper oxides were systematically analyse by UV-Visible spectrometer, X-Ray diffraction, Raman spectroscopy, Scanning electron microscopy (SEM) and Atomic force microscopy measurements (AFM). The UV-Visible result exhibits optical bandgap of Cu2O and CuO as 2.2 and 2.05 eV respectively. SEM and AFM result shows a uniform grain size distribution in Cu2O and CuO thin films with the average grain size of 45 and 40 nm respectively. The results of Current-Voltage and Kelvin probe force microscope characteristics describe the electrical responses of the Cu2O/ZnO and CuO/ZnO heterojunctions photodiodes. The obtained electrical response depicts the approximately same knee voltages with a measurable difference in the absolute value of net terminal current. More over the present study realizes the all oxide transparent photodiode with zero bias photocurrent. The presented results lay the template for fabricating and analysing the self-bias all oxide transparent photodetector.

• 전기화학회지
• /
• 제11권4호
• /
• pp.227-241
• /
• 2008

This article involves a unified treatment of equilibrium thermodynamics of the chemical reaction coupled with other interfacial (phase boundary) reactions. The modified (restrictive) chemical potential ${\mu}_k^+$, such as electrochemical potential, hydrostatic-chemical (mechanochemical) potential (exceptionally in the presence of the pressure difference) and surface-chemical potential, was first introduced under the isothermal and isobaric conditions. This article then enlightened the equilibrium conditions in case where the release of chemical energy is counterbalanced by the supply of electrical energy, by the supply of hydrostatic work (exceptionally in the presence of ${\Delta}p$), and finally by the release of surface energy, respectively, at constant temperature T and pressure p in terms of the modified chemical potential ${\mu}_k^+$. Finally, this paper focussed on the difference between chemical and electrochemical equilibria based upon the fundamentals of the isothermal and isobaric equilibrium conditions described above.

• 한국재료학회지
• /
• 제15권9호
• /
• pp.566-576
• /
• 2005

This paper describes an ab Initio study on interface energies, misfit strain energies, and electron structures at coherent interfaces Fe(bcc structure)/MCs(NaCl structure M=Ti, Zr, Hf). The interface energies at relaxed interfaces Fe/TiC, Fe/ZrC and Fe/HfC were 0.263, 0.153 and $0.271 J/m^2$, respectively. It was understood that the dependence of interface energy on the type of carbide was closely related to changes of the binding energies between Fe, M and C atoms before and after formation of the interfaces Fe/MCs with the help of the DLP/NNBB (Discrete Lattice Plane/ Nearest Neighbour Broken Bond) model and data of the electron structures. The misfit strain energies in Fe/TiC, Fe/ZrC and Fe/HfC systems were 0.390, 1.692 and 1.408 eV per 16 atoms(Fe: 8 atoms and MC; 8 atoms). More misfit energy was generated as difference of lattice parameters between the bulk Fe and the bulk MCs increased.

• Tribology and Lubricants
• /
• 제40권3호
• /
• pp.78-83
• /
• 2024

The development of eco-friendly alternative energy sources has become a global priority owing to the depletion of fossil fuels and an increase in environmental concerns. Hydrogen energy has emerged as a promising clean energy source, and hydrogen compressors play a crucial role in the storage and distribution of compressed hydrogen. However, harsh operating conditions lead to the rapid deterioration of conventional lubricants in hydrogen compressors, thereby necessitating the development of advanced lubrication technologies. This study introduces micrometer-sized silicone rubber powders as lubricant additives to enhance the lubrication performance of hydraulic oils in hydrogen compressors. We prepare silicone rubber powders by varying the ratio of the silicone rubber base to the curing agent and investigate their effects on interfacial properties, friction behavior, and wear characteristics. The findings reveal that the incorporation of silicone rubber powders positively influences the surface affinity, wettability, friction reduction, and wear resistance of the lubricants on the 304SS substrate. Moreover, we identify the optimal lubricant formulations, with a 15:1 ratio demonstrating the most effective friction reduction and a 5:1 ratio exhibiting the highest wear resistance. The controlled surface modification by the silicone rubber powder and the enhanced interfacial characteristics of the powder-containing lubricants synergistically contribute to the improved lubrication performance. These results indicate the potential of silicone rubber powder additives for the development of long-life lubrication solutions for hydrogen compressors and related applications, ultimately contributing to the advancement of sustainable energy technologies.

• Composites Research
• /
• 제31권5호
• /
• pp.282-287
• /
• 2018

본 연구는 광물화된 탄소나노튜브를 고분자 기지재료의 강화재로 사용할 때, 계면 결합력이 기존 탄소나노튜브 강화재에 비해 어떤 차이를 보이는지 분자동역학 시뮬레이션을 통해 탐구한다. 최근 탄소나노튜브에 질소를 도핑한 후 표면을 광물화 하는 실험 연구가 보고되고 있다. 하지만 복합재료의 강화제로 첨가되었을 때 보일 수 있는 물성 증가 현상에 대한 연구는 아직 부족하다. 광물질로는 실리카($SiO_2$)를 사용했고 고분자 기지재료로는 열 가소성 수지인 poly(methyl metacrylate) (PMMA)를 사용했다. 계면 결합력과 계면 전단 응력을 계산하기 위해 강화재를 기지재료로부터 빼내는 pull-out 시뮬레이션이 진행되었다. 계산 결과, 실리카 광물화된 탄소나노튜브가 고분자 기지재료와 향상된 계면 상호작용을 가지는 것으로 조사되었다. 본 연구진은 향후 광물화된 탄소나노튜브 강화재가 첨가된 나노 복합재료의 열 기계적 물성을 분석하여 다양한 분야에서의 활용 가능성을 제시할 계획이다.

• 한국도로학회논문집
• /
• 제17권3호
• /
• pp.77-83
• /
• 2015

PURPOSES : In this study, a fracture-based finite element (FE) model is proposed to evaluate the fracture behavior of fiber-reinforced asphalt (FRA) concrete under various interface conditions. METHODS : A fracture-based FE model was developed to simulate a double-edge notched tension (DENT) test. A cohesive zone model (CZM) and linear viscoelastic model were implemented to model the fracture behavior and viscous behavior of the FRA concrete, respectively. Three models were developed to characterize the behavior of interfacial bonding between the fiber reinforcement and surrounding materials. In the first model, the fracture property of the asphalt concrete was modified to study the effect of fiber reinforcement. In the second model, spring elements were used to simulated the fiber reinforcement. In the third method, bar and spring elements, based on a nonlinear bond-slip model, were used to simulate the fiber reinforcement and interfacial bonding conditions. The performance of the FRA in resisting crack development under various interfacial conditions was evaluated. RESULTS : The elastic modulus of the fibers was not sensitive to the behavior of the FRA in the DENT test before crack initiation. After crack development, the fracture resistance of the FRA was found to have enhanced considerably as the elastic modulus of the fibers increased from 450 MPa to 900 MPa. When the adhesion between the fibers and asphalt concrete was sufficiently high, the fiber reinforcement was effective. It means that the interfacial bonding conditions affect the fracture resistance of the FRA significantly. CONCLUSIONS : The bar/spring element models were more effective in representing the local behavior of the fibers and interfacial bonding than the fracture energy approach. The reinforcement effect is more significant after crack initiation, as the fibers can be pulled out sufficiently. Both the elastic modulus of the fiber reinforcement and the interfacial bonding were significant in controlling crack development in the FRA.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.359-360
• /
• 2013

The effect of electrode and deposition methods on non-linear interfacial resistive switching in HfO2 based $250{\times}250$ nm2 cross-point device was studied. HfO2 based device has the interfacial resistive switching properties of non-linearity and self-compliance current switching. The operating current in HfO2 based device was increased with negatively increasing the heat of formation energy in top electrode. Also, it was investigated that the operating current in HfO2 based device was changed with deposition methods of O3 reactant ALD, H2O reactant ALD and dc reactive sputtering, resulting the magnitude of the operating current and on/off ratio in order of HfO2 films deposited by dc reactive sputtering, H2O reactant ALD, and O3 reactant ALD. To investigate the effect of electrode and deposition methods on operating current of non-linear interfacial resistive switching in the cross-point device, X-ray photoelectron spectroscopy was measured. Through the analysis of O 1s spectra, non-lattice oxygen concentration, which is closely related to oxygen vacancies, was increased in order of Pt, TiN, and Ti top electrodes and in order of O3 reactant ALD, H2O reactant ALD, and O3 reactant ALD, and dc reactive sputtering deposition method. From all results, non-lattice oxygen concentration in ultra-thin HfO2 films play a crucial role in the operating current and memory states (LRS & HRS) in the non-linear interfacial resistive switching.

• 신재생에너지
• /
• 제4권1호
• /
• pp.31-36
• /
• 2008

Stainless steels have been widely considered as metallic bipolar plates, due to their passive surface film, which is good for corrosion resistance. However, the high resistivity of the passive film increases interfacial contact resistance between the bipolar plates and the electrodes. Stainless steels thermal spray coated with a mixture of tungsten carbide and stainless steel powders showed that the coated layer safely combined with the matrix but they suffered many internal defects including voids and cracks. Many cracks were formed in the coated layer and the interface of the matrix and the coated layer during the rolling process. The coated and rolled stainless steels showed lower interfacial contact resistance and corrosion resistance than bare stainless steel because of low resistivity of tungsten carbide and numerous defects, which caused crevice corrosion, in the coated layer.