• Proceedings of the Materials Research Society of Korea Conference
• /
• 1992.05a
• /
• pp.17-17
• /
• 1992

The ceramic high transition temperature superconducting materials present many interesting characteristics that will be analysed from two points of view: physical behavior, and chemical aspects. From the first point of view, these materials display an enormous variety of different physical properties. At low doping levels the normal state shows antiferromagnetism and insulating behavior. At intermediate doping levels, an anomalous metallic state appears and, the optimum Tc in the superconducting state is generated. With increasing doping a normal metallic state develops and superconductivity starts to disappear. Many of the physical phenomena that describe the overall behavior when doping levels are changed will be discussed. From the poing of view of the chemical aspects. we well discuss some of the problems involved in the methods of preparation with particular emphasis on defects, crystal structures, critical currrents, and applications in technology.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.299-302
• /
• 2009

The objective of the present study is to analyze the transient flow through theejector system with the help of a computational fluid dynamics (CFD) method. An attempt is made to investigate the interesting and conflicting phenomenon of the infinite entrainment into the primary stream without an infinite mass supply from the secondary chamber. The results obtained show that the one and only condition in which an infinite mass entrainment can be possible in such types of ejectors is the generation of a re-circulation zone near the primary nozzle exit. The flow in the secondary chamber attains a state of dynamic equilibrium of pressures at the onset of the recirculation zone. A steady flow in the ejector system is valid only after this point.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.245-247
• /
• 1992

We utilize as a processor TMS320C25 (Texas Instrument) in making a driver for a 4 pole PM synchronous servo motor. TMS320C25 has a 32bit ALU and a 16 bit hardware multiplier, and the maximum instruction execution rate is 10MIPS at 40MHz. We adopted a space vector modulation PWM method. An interesting point of this work is that PWM wave is generated by utilizing timer interrupts. Hence, in the rest of time the processor can take care of the other routine such as Park's coordinate transformation and the computation required in the feedback loops. Thus, it mates the hardware circuit very simple. Due to the decrease in the number of components, the motor drive system becomes more fault-tolerant and cost-optimized. Also, more flexibility is gained in changing the control parameters.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.729-733
• /
• 1988

In this paper, a new procedure for selecting weighting matrices in linear discrete time quadratic optimal control problems (LQ-problem) is proposed. In LQ problems, the quadratic weighting matrices are usually decided on trial and error in order to get a good response. But using the proposed method, the quadratic weights are decided in such a way that all poles of the closed loop system are located in a desired area for good responses as well as for stability and values of the quadratic cost functional are kept less then a specified value. The closed loop systems constructed by this method have merits of LQ problems as well as those of pole assignment problems. Taking into consideration that little is known about the relationship among the quadratic weights, the poles and the values of cost functional, this procedure is also interesting from the theoretical point of view.

• Journal of applied mathematics & informatics
• /
• v.33 no.3_4
• /
• pp.275-292
• /
• 2015

This paper is mainly concerned with the existence of solution for nonlinear impulsive fractional dynamic equations on a special time scale.We introduce the new concept and propositions of fractional q-integral, q-derivative, and α-Lipschitz in the paper. By using a new fixed point theorem, we obtain some new existence results of solutions via some generalized singular Gronwall inequalities on time scales. Further, an interesting example is presented to illustrate the theory.

• Computers and Concrete
• /
• v.1 no.3
• /
• pp.249-260
• /
• 2004

The stress transmission mechanism in pretensioned concrete beams, though very interesting from an economical point of view, is very complex, integrating various phenomenons such as sliding, bond, bursting. For long the complexity of this mechanism has led engineers to provide a massive rectangular anchorage zone at each end of the beam. The necessity of using such a concrete reinforcement is certainly unquestionable in post-tensioned beams. However in pretensioned elements the stresses induced in concrete in the anchorage zone are smaller than in post-tensioned elements. In this article the stress field in the end zone is calculated numerically and from this analysis the possible reduction of the cross-section of the anchorage block is examined.

• Structural Engineering and Mechanics
• /
• v.5 no.3
• /
• pp.283-295
• /
• 1997

This paper presents a high precision integration method for the dynamic response analysis of structures with holonomic constraints. A detail recursive scheme suitable for algebraic and differential equations (ADEs) which incorporates generalized forces is established. The matrix exponential involved in the scheme is calculated precisely using $2^N$ algorithm. The Taylor expansions of the nonlinear term concerned with state variables of the structure and the generalized constraint forces of the ADEs are derived and consequently, their particular integrals are obtained. The accuracy and effectiveness of the present method is demonstrated by two numerical examples, a plane truss with circular slot at its tip point and a slewing flexible cantilever beam which is currently interesting in optimal control of robot manipulators.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.1-1
• /
• 2000

The interaction of light with periodic patterns generates beautiful color patterns and interesting applications. The basic equation for understanding this phenomena is the grating equation. It tells us the angles, relative to a perpendicular to a grating with a specific period, into which light of a specific wavelength will be diffracted. But what it does not tell us is how much light will be directed into the various "orders" of the grating. It was found that by controlling the shape of the diamond point used to cut the periodic structure into the substrate, a traditional grating could be made to direct most of the light diffracted from it into a single order. This type of grating is referred to as a "blazed" grating. (omitted); grating. (omitted)

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.4
• /
• pp.360-364
• /
• 1999

The growth of crystals with high melting point$t_{fus}$$\geq$$1600^{\circ}C$ faces the researcher with experimental problems, as the choice of materials that withstand such high t is rather limited. Many metallic construction materials are in this high t range already molten or exhibit at least a drastically reduced mechanical strength. The very few materials with$t_{fus}$$1600^{\circ}C$ as e.g. W, Mo, and partially even Ir are more or less sensitive against oxygen upon heating. Whenever possible, high t crystal growth is performed under inert atmosphere (noble gases). Unfortunately, many oxides are not thermodynamically stable under such conditions, as reduction takes place within such atmosphere. A thoroughly search for suitable growth conditions has to be performed, that are on the one side "oxidative enough" to keep the oxides stable and on the other side "reductive enough" to avoid destruction of constructive parts of the crystal growth assembly. The relevant parameters are t and the oxygen partial pressure${po}_{2}$. The paper discusses quantitatively relevant properties of interesting oxides and construction materials and wasy to forecast theri behavior under growth conditions.

• Architectural research
• /
• v.15 no.2
• /
• pp.69-75
• /
• 2013

Within residential high-rise market there are many value determining factors. Site condition, view, program, units and structure are important parameters that are directly related to the financial aspect of the project. However, most of the studies of high-rise building design focus on the facade and the shape strategies from an esthetic point of view without considering these factors. The objective of this study is to investigate new design approach that incorporates site, program and structural information at an early stage as a generator of building form and explore a wide range of strategies to negotiate these factors in the process of design/decision making. Not being based on designer's subjective preference or style, architects still can create interesting building design through integration and negotiation of various building information. Since this form is based on real data, not just play of form, we can expect that this form has great potential to be developed into real one at the later design phase.