• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.555-555
• /
• 2012

The thermal stability of poly(sodium 4-styrenesulfonate) intercalated graphite oxide has been investigated using a differential scanning calorimeter. The poly(sodium 4-styrenesulfonate) intercalated graphite oxide composite shows a prominent exothermic reaction near $207^{\circ}C$ and an endothermic reaction near $453^{\circ}C$. Graphite oxide is responsible for the exothermic reaction while the endothermic reaction is caused by the poly(sodium 4-styrenesulfonate) used in the synthesis of poly(sodium 4-styrenesulfonate) intercalated graphite oxide. The onset temperature of the exothermic reaction of poly(sodium 4-styrenesulfonate) intercalated graphite oxide decreased by $92^{\circ}C$ in comparison with that of graphite oxide, indicating the addition of poly(sodium 4-styrenesulfonate) in the composite has diminished the thermal stability of graphite oxide.

• Journal of the Korean Ceramic Society
• /
• v.30 no.10
• /
• pp.797-802
• /
• 1993

Graphite fiber intercalated compound was deintercalated at $25^{\circ}C$, 65% of humidity and its deintercalated compound was discussed, based on the X-ray diffraction analysis, electrical resistivity measurement, and UV/VIS spectrometer measurements. During deintercalation, the structure was changed in orderlongrightarrowdisorderlongrightarroworder, and resistivity was decreased in the disorder state of the structure, which reflectance minimum of the UV/VIS spectrum ranged from 660 to 750nm (1.88~1.65eV).

• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.449-453
• /
• 2007

Synthesis of Sn-GIC (Graphite intercalated compound) and its electrochemical characteristics were investigated to find a method for enhancing the performance of carbon anode of lithium ion battery. The content of Sn intercalated in graphite interlayer increased with increase of concentration of $SnCl_2$ solution and increase of the heat treatment temperature of dried graphite after dipped in $SnCl_2$ solution, respectively. And initial discharge capacity increased upon increase of intercalated Sn content. Sn-GIC with excellent electrochemical performance, which can be synthesized by heat treatment at $900^{\circ}C$ after dipped in 1.0 M $SnCl_2$ solution, showed 356 mAh/g of initial discharge capacity and 13% of capacity decay after 10 cycles.

• Journal of Powder Materials
• /
• v.12 no.2 s.49
• /
• pp.151-158
• /
• 2005

Porous graphite was synthesized by removal of template in HF after pyrolysis of pyrolyzed fuel oil (PFO) at $900^{\circ}C$ using the template of Co or Ni intercalated magadiite. Porous graphite had a plate structure like template, and d-spacing value of about 0.7 nm. The extent of crystallization of porous graphite was dependent on the contents of Co or Ni intercalated in interlayer. It can be explained that the metal such as Co and Ni acts as a promotion catalyst for graphite formation. Porous graphite shows the surface area of $328\sim477 m^2/g$.

• Analytical Science and Technology
• /
• v.14 no.3
• /
• pp.197-202
• /
• 2001

The characteristics of the electrochemically Li intercalated synthetic graphite were determined from the studies with XRD method, DSC and solid $^7Li-NMR$ spectrophotometric analysis. From the results of X-ray diffraction method, it was found that the compounds in the stage 1 structure were predominantly formed. The enthalpy and entropy changes of the compounds can be obtained from the differential scanning calorimetric analysis results. From these results, it was found that exothermic and endothermic reactions of lithium intercalated into synthetic graphite are related to thermal stability of lithium ion between carbon graphene layers. From the $^7Li-NMR$ data, scientific observation found that bands are shift toward higher frequencies with increasing lithium concentration because non-occupied electron shells of Li increased in charge carrier density. Line widths of the Li intercalated synthetic graphite compounds decreased slowly because of non-homogeneous local magnetic order and the random electron spin direction for substituted Li.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.393-393
• /
• 2011

We investigated the electronic structures of a poly sodium 4-styrensulfonate intercalated graphite oxide (PSSGO) electrode and a precursor graphite oxide (GO) electrode using X-ray absorption spectroscopy (XAS). Both electrodes were obtained from electrochemical cells. We found that in the C K-edge XAS spectra the ${\pi}^*$ state intensity originating from the sp2 hybridization of graphite decreases predominantly in the graphite oxide and PSSGO electrodes. This indicates that the negatively charged electrolyte ion (BF4-) is absorbed onto the electrodes and is transferred to the ${\pi}^*$ state of the both electrodes. The analysis of their F K-edge spectra reveals that more BF4- ions were found in the PSSGO electrode than in the graphite oxide electrode. This indicates that more electrolyte ions are absorbed in the PSSGO than in the graphite oxide electrode. We argue that this is the main reason why PSSGO cells have higher capacitance, higher energy density, and higher power density when compared to the graphite oxide cells. We also found that BF4- is the primary working ion that can be inserted into the interlayers of the PSSGO electrode.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.287.2-287.2
• /
• 2013

We synthesized a new composite of poly sodium 4-styrenesulfonate intercalated graphene oxide for energy storage devices by controlling oxidation time in the synthesis of graphite oxide. Specific capacitance was improved from 20 F/g of the previous composites to 88 F/g of the new composite at the current density of 0.3 A/g. The capacitance retention was 94% after 3000 cycles, indicating that the new composites of high cyclic stability, prominent performance as electric double layer capacitor, and even low resistance could be an excellent carbon based electrode for further energy storage devices.

• Carbon letters
• /
• v.2 no.1
• /
• pp.55-60
• /
• 2001

Graphite intercalation compounds (GIC) were prepared by direct reaction of $SO_3$ gas with flake graphite. The intercalated $SO_3$ molecules were ejected by rapid heating to $950^{\circ}C$ under an oxidizing atmosphere for about 1 minute, resulting in surprisingly high expansion in the direction of c-axis. The characteristics of the micro-structure and pore size distribution were examined with a SEM and mercury intrusion porosimetry. The XRD analysis and spectroscopic analysis were used for the identification of the graphite and surface chemistry state. The pore size distribution of the exfoliated graphite (EG) was a range of $1{\sim}170{\mu}m$. The higher expanding temperature the higher expanded volume, so oil sorption capacities were 58.8 g of bunker-C oil and 34.7 g of diesel oil per 1 g of the the EG. The sorption equilibrium was achieved very rapidly within several minutes. As the treatment temperature increases, bulk density decreases.

• Journal of the Korean Ceramic Society
• /
• v.30 no.9
• /
• pp.768-774
• /
• 1993

Sulphuric acid was intercalated in mesophase pitch based graphite fiber (Thornel P100 of Amoco), PAN based graphite fiber (M40 of Thoray) and PAN based carbon fiber (T300 ofThoray, TZ307 of Taekwang in Korea) by 0.4wt% CrO3/H2SO4 solution. The degree of crystallization of fibers increased P100, M40, TZ307, T300 fiber in order and their d002 values were 3.384, 3.424, 3.470, 3.493$\AA$, respectively. After intercalation P100 fiber formed 1 stage compound whose d002 value was 3.994$\AA$(d001=7.988$\AA$). Other fibers showed (002) reflection belonging to their 1 stage comound and prinstine fiber.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.227-227
• /
• 2010

The intercalation chemistry of graphite presents an attractive route to obtain few-layered graphene platelets based on the expanded interlayer spacing. We report that the lithium can be intercalated into the graphite in a controllable manner by adjusting the variables such as temperature, pressure, and reaction time. From the X-ray diffraction experiments, the lithium-graphite intercalaltion compounds (Li-GICs) can be produced as the first stage compounds ($LiC_6$), the second-stage compounds ($LiC_{12}$), and the mixtures, which is most likely to be dependent on the temperature and reaction time. Since these Li-GICs are expected to facilitate the exfoliation of graphite, we investigated the feasibility of Li-GICs as a effective precursors for the generation of single-or few-layered graphite nano-platelets.