• Korean Journal of Weed Science
• /
• v.7 no.1
• /
• pp.45-51
• /
• 1987

This experiment was conducted to find out the critical competitive period and competitive ability of rice against red rice. Plant height and number of tillers of rice decreased as red rice competed with rice during active tillering stage. The maximum tillering stage of rice competed with red rice became about 10days earlier than those non-competed. Significant yield reduction of rice was observed in the plots competed for 20 days after transplating or longer. Such a yield reduction can be mainly attributed to the decrease in number of panicles per hill and grain number per panicle. In a replacement diagram for rice and red rice, their competition is turned out being antagonized. The relative yield total was considered lower than 1. Grain number, culm and panicle length of rice was not affected significantly by inter-specific competition. Rice grain yield reduction was highly correlated with the number of panicles of red rice. Three hundred panicles/$m^2$ of the red rice were necessary to reduce rice grain yield by 50% of the check plot.

• The KIPS Transactions:PartB
• /
• v.12B no.7 s.103
• /
• pp.829-840
• /
• 2005

Word Sense Disambiguation(WSD) is one of the most difficult problem in Korean information processing. We propose a WSD model with the capability to filter semantic information using the specific characteristics in dictionary dictions, and nth added information, useful to sense determination, such as statistical, distance and case information. we propose a model, which can resolve the issues resulting from the scarcity of semantic information data based on the word hierarchy system (thesaurus) developed by Ulsan University's UOU Word Intelligent Network, a dictionary-based toxicological database. Among the WSD models elaborated by this study, the one using statistical information, distance and case information along with the thesaurus (hereinafter referred to as 'SDJ-X model') performed the best. In an experiment conducted on the sense-tagged corpus consisting of 1,500,000 eojeols, provided by the Sejong project, the SDJ-X model recorded improvements over the maximum frequency word sense determination (maximum frequency determination, MFC, accuracy baseline) of $18.87\%$ ($21.73\%$ for nouns and inter-eojeot distance weights by $10.49\%$ ($8.84\%$ for nouns, $11.51\%$ for verbs). Finally, the accuracy level of the SDJ-X model was higher than that recorded by the model using only statistical information, distance and case information, without the thesaurus by a margin of $6.12\%$ ($5.29\%$ for nouns, $6.64\%$ for verbs).

• The Journal of the Korea Contents Association
• /
• v.17 no.9
• /
• pp.1-11
• /
• 2017

The importance of data curation is increasingly recognized as the need of data reuse drastically grows. Due to recent data explosion, scientists invest almost 90% of their efforts in the retrieval and collection of data needed to their study. In this paper, we deal with the development and application of a collaborative environment for community-driven data curation which is essential to enhance scientific data reusability and citability. The collaborative scientific data curation environment focuses on the cross-linking between data (or data collections) and their associated literatures to capture and organize inter-relations among research results in a specific domain. Also, plenty of contextual information is provided as metadata in order to support users in understanding data. The cross-linking has been realized by using DOI system to guarantee global accessibility to data and their relationships to literatures. The curation environment has been adopted to build a community-driven curated DB by a globally well-known intrinsically-disorderd protein research group. The curated DB will drastically reduce researchers' efforts to retrieve and collect the data required for scientific discovery.

• Korean Journal of Environmental Biology
• /
• v.31 no.4
• /
• pp.353-361
• /
• 2013

An in situ mesocosm experiment was designed to investigate how exposure to ocean acidification by increased carbon dioxide affected the growth of juvenile oliver flounder (Paralichthys olivaceus). A total of 447 individuals were reared in the mesocosm experimental devices deployed at sandy-muddy bottom in the southern coast of East Sea for 43 days and divided into two groups: treatment group (223 individuals, $6.32{\pm}0.75$ cm, high-$CO_2$ environment) and control group (224 individuals, $6.34{\pm}0.84$ cm, natural $CO_2$ environment). The average values of pH and $CO_2$ concentration in the treatment device were $7.63{\pm}0.13$ and $1660{\pm}540$ ${\mu}atm$, respectively, while those in the control device were $8.07{\pm}0.05$ and $514{\pm}65$ ${\mu}atm$, respectively. There was no significant difference in mortality rate between treatment and control group, and the mortalities in two groups gradually decreased during the study period. But, the increase of size and weight of juvenile oliver flounder was higher in control group than treatment group, i.e., weight gain or growth rate was higher in control group. These results suggested that high $CO_2$ environments could have a significant negative influence on the early growth of juvenile oliver flounder.

• Journal of Biomedical Engineering Research
• /
• v.29 no.1
• /
• pp.32-39
• /
• 2008

This paper reports on a realtime OS based master-slave configuration robot control system for laparoscopic surgery robot which enables telesurgery and overcomes shortcomings with conventional laparoscopic surgery. Surgery robot system requires control system that can process large volume information such as medical image data and video signal from endoscope in real-time manner, as well as precisely control the robot with high reliability. To meet the complex requirements, the use of high-level real-time OS (Operating System) in surgery robot controller is a must, which is as common as in many of modem robot controllers that adopt real-time OS as a base system software on which specific functional modules are implemened for more reliable and stable system. The control system consists of joint controllers, host controllers, and user interface units. The robot features a compact slave robot with 5 DOF (Degree-Of-Freedom) expanding the workspace of each tool and increasing the number of tools operating simultaneously. Each master, slave and Gill (Graphical User Interface) host runs a dedicated RTOS (Real-time OS), RTLinux-Pro (FSMLabs Inc., U.S.A.) on which functional modules such as motion control, communication, video signal integration and etc, are implemented, and all the hosts are in a gigabit Ethernet network for inter-host communication. Each master and slave controller set has a dedicated CAN (Controller Area Network) channel for control and monitoring signal communication with the joint controllers. Total 4 pairs of the master/slave manipulators as current are controlled by one host controller. The system showed satisfactory performance in both position control precision and master-slave motion synchronization in both bench test and animal experiment, and is now under further development for better safety and control fidelity for clinically applicable prototype.

• Korean Journal of Materials Research
• /
• v.9 no.6
• /
• pp.635-653
• /
• 1999

The present work considers work considers research strategies to address global warming. Specifically, this work considers the development of technologies of importance for the reduction of greenhouse gas emission and, especially, the materials that are critical to these technologies. It is argued that novel materials that are essential for the production of environmentally friendly energy may be developed through a special kind of engineering: interface engineering, rather than through classical bulk chemistry. Progress on the interface engineering requires to increase the present state of understanding on the local properties of materials interfaces and interfaces processes. This, consequently, requires coordinated international efforts in order to establish a strong background in the science of materials interfaces. This paper considers the impact of interfaces, such as surfaces and grain boundaries, on the functional properties of materials. This work provides evidence that interfaces exhibit outstanding properties that are not displayed by the bulk phase. It is shown that the local interface chemistry and structure and entirely different than those of the bulk phase. In consequence the transport of both charge and matter along and across interfaces, that is so important for energy conversion, is different than that in the bulk. Despite that the thickness of interfaces is of an order to a nanometer, their impact on materials properties is substantial and, in many cases, controlling. This leads to the conclusion that the development of novel materials with desired properties for specific industrial applications will be possible through controlled interface chemistry. Specifically, this will concern materials of importance for energy conversion and environmental monitoring. Therefore, there is a need to increase the present state of understanding of the local properties of materials interfaces and the relationship between interfaces and the functional properties of materials. In order to accomplish this task coordinated international efforts of specialized research centres are required. These efforts are specifically urgent regarding the development of materials of importance for the reduction of greenhouse gases. Success of research in this area depends critically on financial support that can be provided for projects on materials of importance for a sustainable environment, and these must be considered priorities for all of the global economies. The authors of the present work represent an international research group economies. The authors of the present work represent an international research group that has entered into a collaboration on the development of the materials that are critical for the reduction of greenhouse gas emissions.

• 한국해양학회지
• /
• v.24 no.4
• /
• pp.184-193
• /
• 1989

An investigation on the soft-bottom macrobenthic community in the inner Kyeonggi Bay was conducted in July, October of 1987 and February, May of 1988. The benthic fauna comprised a total of 87 species and showed mean density of 550 indiv./$m^2$. Major faunal groups are polychaetes, molluks, and crustaceans, corresponding to 64.7%, 17.4%, and 15.2% in total abundance respectively. The most abundant species was Tharyx sp. (10.9%), and followed by Mactra veneriformis (10.5%), Mediomastus sp. (8.6%), and Glycinde sp. (8.0%) etc.. The important species in the intertidal zone were Mactra veneriformis, Hinia festiva, and Nephtys californiensis, whereas those in subtidal channel region were Tharyx sp., mediomastus sp., Sternaspis scutata, and Nephtys polybranchia. The study area could be divided into 4 station groups based on the species composition; two groups within interidal flat and two in channel regions. Each station group sustained its specific benthic faunal assemblage; Mactra-Hinia, Aricidea-Haploscoloplos assemblages in the intertidal flat and Harpiniopsis-Urothoe, Mediomastus-Sternaspis assemblages in the subtidal channel region. The Mediomastus-Sternaspis assemblage showed the highest species number and population density, and also did the highest diversity and evenness indices. The Harpiniopsis-Urothoe assemblage showed the poor species composition and abundance, and so recorded the highest dominance index. Two assemblages in the intertidal flat had the intermediate values in all the biological parameters. The northern channel region of zone S-2 showed the high abundance in species composition, which seems to be caused by the heterogeneous sediment and the organic enrichment from the Han River and the Incheon industrial complex.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.1
• /
• pp.84-93
• /
• 2004

Recently, domain-specific demands with respect to practical applications and analysis scheme using spatial thematic information are increasing. Accordingly, in this study, GIS-based application program is implemented to perform spatial analysis in transportation geography with base road layer data. Using this program, quantitative estimation of circuity and accessibility, which can be extracted from nodes composed of the graph-typed network structure, in a arbitrary analysis zone or administrative boundary zone is possible. Circuity is a concept to represent the difference extent between actual nodes and fully connected nodes in the analysis zone. While, accessibility can be used to find out extent of accessibility or connectivity between all nodes contained in the analysis zone, judging from inter-connecting status of the whole nodes. In put data of this program, which was implemented in AVX executable extension using AvenueTM of ArcView, is not transportation database information based on transportation data model, but layer data, directly obtaining from digital map sets. It is thought that computation of circuity and accessibility can be used as kinds of spatial analysis functions for GIS applications in the transportation field.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.3
• /
• pp.193-200
• /
• 2010

Current rose cultivars are all composed of heterozygous genome due to long history of out crossing including interspecific hybridization. It has been adapted by artificial selection and crossing by breeders that mainly based on the crossing with fertile pollen derived from inter- or intra-specific hybridization. Pollen viability and germination ability tests provide valuable information for the designing of parentage for more successful breeding efficacy. In this study, we tested the pollen viability and germination ability in seven rose cultivars to find any relationship among several factors including pollen size, ploidy levels, and crossing compatibility. The pollen viability showed wide ranges from 39% 'Pinocchio' as minimum to 82% 'Scarlet Mimi' as maximum, whereas pollen germination rate were from 1% 'Mini Rosa' to 41% 'Scarlet Mimi' as a highest. Pollen size ranged from 41.3 to $45.4{\mu}m$ in large sized pollen and 30.7 to $37.4{\mu}m$ in small sized pollen. The mean diameter of large sized pollen is approximately 10-40% bigger than that of small sized pollen. There are positive relationships among ploidy level, total chromosome length, and pollen size. Crossing list showed that seed setting ratio and seed germination were related to pollen viability, pollen germination, and ploidy level.

• Journal of Ginseng Research
• /
• v.43 no.1
• /
• pp.38-48
• /
• 2019

Background: Interspecific ginseng hybrid, Panax ginseng ${\times}$ Panax quenquifolius (Pgq) has vigorous growth and produces larger roots than its parents. However, F1 progenies are complete male sterile. Plant tissue culture technology can circumvent the issue and propagate the hybrid. Methods: Murashige and Skoog (MS) medium with different concentrations (0, 2, 4, and 6 mg/L) of 2,4-dichlorophenoxyacetic acid (2,4-D) was used for callus induction and somatic embryogenesis (SE). The embryos, after culturing on $GA_3$ supplemented medium, were transferred to hormone free 1/2 Schenk and Hildebrandt (SH) medium. The developed taproots with dormant buds were treated with $GA_3$ to break the bud dormancy, and transferred to soil. Hybrid Pgq plants were verified by random amplified polymorphic DNA (RAPD) and inter simple sequence repeat (ISSR) analyses and by LC-IT-TOF-MS. Results: We conducted a comparative study of somatic embryogenesis (SE) in Pgq and its parents, and attempted to establish the soil transfer of in vitro propagated Pgq tap roots. The Pgq explants showed higher rate of embryogenesis (~56% at 2 mg/L 2,4-D concentration) as well as higher number of embryos per explants (~7 at the same 2,4-D concentration) compared to its either parents. The germinated embryos, after culturing on $GA_3$ supplemented medium, were transferred to hormone free 1/2 SH medium to support the continued growth and kept until nutrient depletion induced senescence (NuDIS) of leaf defoliation occurred (4 months). By that time, thickened tap roots with well-developed lateral roots and dormant buds were obtained. All Pgq tap roots pretreated with 20 mg/L $GA_3$ for at least a week produced new shoots after soil transfer. We selected the discriminatory RAPD and ISSR markers to find the interspecific ginseng hybrid among its parents. The $F_1$ hybrid (Pgq) contained species specific 2 ginsenosides (ginsenoside Rf in P. ginseng and pseudoginsenosides $F_{11}$ in P. quinquefolius), and higher amount of other ginsenosides than its parents. Conclusion: Micropropagation of interspecific hybrid ginseng can give an opportunity for continuous production of plants.