• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.10a
• /
• pp.71-78
• /
• 2006

The image of an object obtained by the radar is not corresponding to its true shape, because the image of an object observed by the radar is receiving an influence such as multiple-reflections and expanded in bearing because of the beam width of a radar. In addition, a radio wave does not hit the entire surface of an object. Therefore, the image of the front side of a ship facing a radar antenna corresponds to its true shape. In this paper, a method to estimate a ship's shape by means of the integration of the front parts of images obtained from radars is proposed. In addition, a matter, which is observation error of each radar, in using multi-radars, and the process included in the proposed method for solving the matter, are described. As a result of the experiment, the accuracy of about 3 degrees in ship's heading and about 14 meters in length and about 9 meters in beam was obtained.

• Korean Institute of Interior Design Journal
• /
• v.20 no.6
• /
• pp.272-281
• /
• 2011

The purpose of this study is to analyze the correlation between spatial space structure and visitors' behavior and interpret visitors' behavior concretely from the aspect of exhibition environments. So, this study intends to qualify spatial space structure with integration, connectivity and control value by utilizing space syntax, limit to tracking score among the analysis index and reinterpret with exhibition density and extend of eyesight among the exhibition environments. The results of this study are as follows; First, in case of museums, tracking score shows plus correlation with connectivity and control value among the space syntax variables and very low correlation with integration. In case of art museums, tracking score shows plus correlation with integration and wide variable is judged to more useful to analyze visitor's behavior than minor variable. Second, museums doesn't make a great effect on visitors' behavior from the aspect of extent of eyesight, but from the aspect of exhibition density, visitors relatively watched evenly without short cut at the early stage of exhibition in spite of high exhibition density. And, they conducted short cut as they went to the middle stage of exhibition on the course of watching although the numerical value of exhibition density is low. Third, in case of art museums, visitors' behavior was relatively influenced by exhibition density, not extent of eyesight. But, as they went to the high level on the course of watching, watching speed became rapid and watching length became short in the place the value of extent of eyesight was high. Its reason is judged to be easy to grasp position or space structure of the next exhibition room visually. Therefore, when the concentration of watching is necessary from the aspect of exhibition, to control exhibition density properly before the space is useful to draw visiting to exhibition space afterward.

• The Journal of Korean Academy of Sensory Integration
• /
• v.17 no.3
• /
• pp.26-45
• /
• 2019

Objective : The purpose of this study is to develop educational goals, training content, and training methods for the intervention course of the Korean Academy of Sensory Integration (KASI) and to conduct competency-based intervention courses based on the competency model for sensory integration intervention. Methods : This study was conducted on work therapists who participated in the 2019 intervention course of KASI. In the first phase, educational needs were analyzed to set goals for the interventional course. In the second phase, a meeting of researchers drafted the intervention course education program and the methods of education, and the intervention course was conducted. In the third phase, the changes in educational satisfaction and performance level pre- and post-intervention course for each competency index were investigated. Results : The educational goals of "learning and applying the clinical reasoning process of sensory integration intervention" and "intervention by applying the principle of sensory integration intervention" were set after reflecting on the results of the analysis of the educational requirements. The length of the competency-based intervention course was 42 hours. The average education satisfaction level of participants in the arbitration process was 4.48±0.73, and the average education satisfaction level of the supervisor was 3.92±0.71. In both groups, the most satisfying curriculums were the data-driven decision-making process and the intervention goal-setting lecture. But the satisfaction level of was the lowest. Before and after the intervention course, there were significant changes in the performance of the two behavioral indicators of the analytic skills in the expertise competency cluster of the competency model. Conclusion : This study is meaningful in that it conducted a survey of educational needs, the development and implementation of an educational curriculum, and an education satisfaction survey through systematic courses necessary for education development.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1763-1768
• /
• 2016

This paper presents the electrical characteristics of the gallium nitride (GaN) current aperture vertical electron transistor (CAVET) by using two-dimensional (2-D) technology computer-aided design (TCAD) simulations. The CAVETs are considered as the alternative device due to their high breakdown voltage and high integration density in the high-power applications. The optimized design for the CAVET focused on the electrical performances according to the different gate-source length ($L_{GS}$) and aperture length ($L_{AP}$). We analyze DC and RF parameters inducing on-state current ($I_{on}$), threshold voltage ($V_t$), breakdown voltage ($V_B$), transconductance ($g_m$), gate capacitance ($C_{gg}$), cut-off frequency ($f_T$), and maximum oscillation frequency ($f_{max}$).

• Industrial Engineering and Management Systems
• /
• v.4 no.2
• /
• pp.158-164
• /
• 2005

Kusukawa and Ohta presented the $CS_{CQ-r}$ chart to monitor the process defect $rate{\lambda}$ in high-yield processes that is derived from the count of defects. The $CS_{CQ-r}$ chart is more sensitive to $monitor{\lambda}$ than the CQ (Cumulative Quantity) chart proposed by Chan et al.. As a more superior chart in high-yield processes, we propose a Synthetic chart that is the integration of the CQ_-r chart and the $CS_{CQ-r}$chart. The quality characteristic of both charts is the number of units y required to observe r $({\geq}2)$ defects. It is assumed that this quantity is an Erlang random variable from the property that the quality characteristic of the CQ chart follows the exponential distribution. In use of the proposed Synthetic chart, the process is initially judged as either in-control or out-of-control by using the $CS_{CQ-r}$chart. If the process was not judged as in-control by the $CS_{CQ-r}$chart, the process is successively judged by using the $CQ_{-r}$chart to confirm the judgment of the $CS_{CQ-r}$chart. Through comparisons of ARL (Average Run Length), the proposed Synthetic chart is more superior to monitor the process defect rate in high-yield processes to the stand-alone $CS_{CQ-r}$ chart.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.1
• /
• pp.82-90
• /
• 2017

The aim of this work is to develop a new computational program to determine the effect of using the gas of propulsion of combustion chamber at high temperature on the shape of the two-dimensional Minimum Length Nozzle giving a uniform and parallel flow at the exit section using the method of characteristics. The selected gases are $H_2$, $O_2$, $N_2$, CO, $CO_2$, $H_2O$, $NH_3$, $CH_4$ and air. All design parameters depend on the stagnation temperature, the exit Mach number and the used gas. The specific heat at constant pressure varies with the temperature and the selected gas. The gas is still considered as perfect. It is calorically imperfect and thermally perfect below the threshold of dissociation of molecules. A error calculation between the parameters of different gases with air is done in this case for purposes of comparison. Endless forms of nozzles may be found based on the choise of $T_0$, $M_E$ and the selected gas. For nozzles delivering same exit Mach number with the same stagnation temperature, we can choose the right gas for aerospace manufacturing rockets, missiles and supersonic aircraft and for supersonic blowers as needed in settings conception.

• Korean Journal of Optics and Photonics
• /
• v.23 no.5
• /
• pp.227-232
• /
• 2012

A large-signal time-domain model is implemented to analyze an FG-LD (Fiber Grating Laser Diode) in which a reflective laser diode is hybrid-integrated with a fiber Bragg grating (FBG). When the length of the externally integrated resonator is 8 mm, in which the effective FBG length of 2.1 mm is included, a static frequency chirp of 0.44 GHz and a dynamic frequency chirp of 6.4 GHz are observed. In addition, it is also observed that the eye of the 10Gbps NRZ signal is well open. The FG-LD is expected to be a cost-effective solution for a 10Gbps-class single wavelength laser covering a span of 50 km range.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.100-103
• /
• 2008

In this paper, we propose H.264 Encoder integrating Intra Prediction, Deblocking filter, Context-Based Adaptive Variable Length Coding, and Motion Estimation encoder module. This designed module can be operated in 440 cycle for one-macroblock. To verify the Encoder architecture, we developed the reference C from JM 9.4 and verified the our developed hardware using test vector generated by reference C. The designed circuit can be operated in 166MHz clock system, and has 1800k gate counts using Charterd 0.18um process including SRAM memory. Manufactured chip has the size of $6{\times}6mm$ and 208 pins package.

• The KIPS Transactions:PartA
• /
• v.12A no.5 s.95
• /
• pp.391-394
• /
• 2005

In this paper, we study the average case error of the Trapezoidal rule using zero mean-Gaussian. Assume that we have n subintervals (for simplicity equal length) partitioning [0,1] and that each subinterval has the length h. Then, for $r{\leq}2$, we show that the average error between simple Trapezoidal rule and the composite Trapezoidal rule on two consecutive subintervals is bounded by $h^{2r+3}$ through direct computation of constants $c_r$.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.2
• /
• pp.90-96
• /
• 2008

A pneumatic system was proposed to evaluate displacement accuracy of the pneumatic actuator without external load and to analyze capability of integration of the proposed valve system. The proposed pneumatic system consisted of a combination of pneumatic valves, two proximity sensors, and a programmable logic controller(PLC). The position controller is based on the PLC controller connected with the proximity sensors. Displacement accuracy of the pneumatic cylinder stroke was tested by varying air pressures of the supply and discharge-side and strokes of the pneumatic cylinder. The displacement accuracy of the pneumatic cylinder stroke increased as the supply and discharge side of air pressure increased at the stroke length of 133mm. Also the displacement accuracy increased as the stroke length increased with a fixed supply and discharge side of air pressure of the pneumatic cylinder as 3.5 and $4.5kg/cm^2$, respectively. The most accurate displacement of the pneumatic cylinder(i.e., standard deviation of 0.01 mm) was obtained at the supply and discharge side of air pressure of 4.0 and $5.0kg/cm^2$, respectively, and strokes of 170 and 190 mm among arbitrarily selected supply and discharge side air pressures and strokes.