• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.11
• /
• pp.1986-1996
• /
• 2003

Methodology based on the elastic-plastic fracture mechanics has been widely accepted in predicting the critical crack length(CCL) of pressure tubes of CANDU nuclear plants. A conservative estimate of CCL is obtained by employing the J-resistance curves measured with the specimens satisfying plane strain condition as suggested in the ASTM standard. Due to limited thickness of the pressure tubes the curved compact tension(CT) specimens taken out from tile pressure tube have been used in obtaining J-resistance curves. The curved CT specimen inevitably introduce slant fatigue crack during precracking. Hence, effect of specimen geometry and slant crack on J-resistance curve should be explored. In this study, the difference of J integral values between the standard CT specimens satisfying plane strain condition and the nonstandard curved CT with limited thickness (4.2mm) is estimated using finite element analysis. The fracture resistance curves of Zr-2.5Nb obtained previously by other authors are critically discussed. Various finite element analysis were conducted such as 2D analysis under plane stress and plane strain conditions and 3D analysis for flat CT, curved CT with straight crack and curved CT with slant crack front. J-integral values were determined by local contour integration near the crack tip, which was considered as accurate J-values. J value was also determined from the load versus load line displacement curve and the J estimation equation in the ASTM standard. Discrepancies between the two values were shown and suggestion was made for obtaining accurate J values from the load line displacement curves obtained by the curved CT specimens.

• Journal of Plant Biology
• /
• v.28 no.2
• /
• pp.119-126
• /
• 1985

The productivity and growth pattern of Sargassum confusum (Phaeophyta, Sargassaceae) was investigated in Ohori, east coast of Korea, from March 1983 to April 1984. S. confusum shows an obvious seasonal variation of the growth by passing through the germinative, vegetative, reproductive and decaying phases for about an year. The mean length of tagged individuals shows a positive correlation with the water temperature during the growing period. The growth is depressed at less than 1$0^{\circ}C$ in February, and accelerated at above 15$^{\circ}C$ in May. The rapid growth (1.29 cm/dry) occurs at 15-l8$^{\circ}C$ during May-June and the maximum length is shown at 20-21$^{\circ}C$ in early August. Daily net production estimated by the oxygen light and dark bottle method is 11.2 g C/$m^2$/ day in June. The annual value calculated by the integration of the daily net production, growth rate and biomass is 745 gC/$m^2$/yr. Net production estimated from the biomass change only is 287 gC/$m^2$/yr. But this must be an underestimated value, because the loss of considerable biomass by shedding is not included.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.1
• /
• pp.52-61
• /
• 1998

We studied behaviour pattern of anchovy (Engraulis japonicus) shoal by a method of shoal echo integration and tested species identification by a method of artificial neural network using the acoustic data collected in the East China Sea in March 1994 and in the southern coastal waters of the East Sea of Korea in March 1995. Between areas, frequency distribution of 10 shoal descriptors was different, which showed characteristics of shoal behaviour in size, bathymetric position and acoustic strength. The range and mean of shoal size distribution in length and height was wider and bigger in the southern coastal waters of the East Sea than in the East China Sea. Relative shoal size of China Sea. Fractal dimension of shoal was almost same in both areas. Mean volume reverbration index of shoal was 3 dB higher in the southern coastal waters of the East Sea than in the East China Sea. The depth layer of shoal distribution was related to bottom depth in the southern coastal waters of the East Sea, while it was between near surface and central layer in the East China Sea. Principal component analysis of shoal descriptors showed the correlation between shoal size and acoustic strength which was higher in the southern coastal waters of the East Sea, than in the East China Sea. Correlation was also found among the bathymetric positions of shoal to some degree higher in the southern coastal waters of the East Sea than in the East China Sea. The anchovy shoal of two areas was identified by artificial neural network. The contribution factor index (Cio) of the shoal descriptors between two areas were almost identical feature. The shoal volume reverberation index (Rv) was showed the highest contribution to the species identification, while shoal length and shoal height showed relatively high negative contribution to the species identification.

• Fisheries and Aquatic Sciences
• /
• v.21 no.11
• /
• pp.34.1-34.13
• /
• 2018

Sexual maturity ($L_{50}$), the length at which 50% of fish in a size class are mature, is a key aspect of domestication of new fish species because it guides the procedure for identification of appropriate broodstock size for artificial spawning. In this study, the $L_{50}$ was determined for 1083 Barbus altianalis samples obtained from Lake Edward and the Upper Victoria Nile. Gonads of freshly killed samples were examined macroscopically and verified with standard histological procedures for the maturation stages that were used to determine $L_{50}$. Oocytes and spermatogenic cell sizes were compared for fish obtained from both water bodies. Results indicated that there were no variations in macro gonad features observed for fish from Lake Edward and Upper Victoria Nile. Similarly, there were no significant differences in oocyte sizes (P > 0.05) between the two populations but significant differences in spermatogenic cell sizes were noted (P < 0.05) except for spermatozoa (P > 0.05). This however did not suggest peculiar differences between the two populations for staging the gonads. Consequently, no staging variations were suggested for both populations in determination of $L_{50}$. Sexual maturity was found in the same class size of fork length (FL) 20-24.9 cm and 35-39.9 cm for males and females from both water bodies, respectively. At this FL, however, males were too small, and for good selection of vigor broodstocks for spawning and conservation purposes, they are better picked from class size of 30-34.9 cm FL and above. These findings were crucial for integration of appropriate breeding size in spawning protocol by farmers and fisheries scientists conserving wild B. altianalis populations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5B
• /
• pp.871-878
• /
• 2000

A divided matched filter-reference filter(MF-RF) technique for LEO satellite packet transmission is proposed to increase the packet throughput in the presence of severe Doppler shift and fading. To overcome the severe Doppler shift, the divided matched filter is adopted where the integration region of matched filter is divided and ouputs of divided matched filer are added to decide the correct pseudo-noise (PN) phase. To maintain the constant false alarm rate in time varying interference and fading channel, the adaptive threshold for acquisition is obtained from the reference filter. As a performance measure, average acquisition time and packet throughput are used, and the effets of the parameters, i.e., Doppler shift, chip energy to noise ratio, user velocity, standard deviation of shadowing, and preamble length are shown.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.62-65
• /
• 2009

There have been strong demands for micro size screw with high precision due to miniaturization and integration trends for electronic products such as Hard Disk Drives. The thread rolling process for screw manufacturing are lower unit cost, reduced material utilization, and superior mechanical properties compared to the machining process. But little work has been done on the thread rolling of micro size screw. In this paper, we investigate thread rolling process using Finite Element Analysis (FEA) and parameter study for screw manufacturing. And we also carried out compression tests to obtain the material property and to implement into the FE tool for the numerical simulation. In case that parameter of relative position oldies is half length of pitch for maintaining the continuous thread profiles, we found that shear friction factor was 0.9 during the thread rolling process using FEA. We are trying to develop the thread rolling process using the FE-simulation to manufacture screws which have been commonly produced from the industrial level fabrication at present.

• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.4
• /
• pp.151-160
• /
• 2015

GPS L2C signal is a recently added civil signal to L2 frequency and is constructed by time division multiplexing of civil moderate (L2-CM) and civil long (L2-CL) code signals. While the L2-CM code is 20 ms-periodic and modulates satellite navigation message, the L2-CL code is 1.5s-periodic with 767,250 chips long code sequence and carries no data. Therefore, the L2-CL code signal allows receivers to perform a very long coherent integration. However, due to the length of the L2-CL code, the acquisition of the L2-CL code signal may take too long or require too much hardware resources. In this paper, we propose a three-step ultra-fast L2-CL code acquisition (TSCLA) technique for dual band GPS receivers. In the proposed TSCLA technique, a dual band GPS receiver sequentially acquires the coarse/acquisition (C/A) code signal at L1 frequency, the L2-CM code signal, and the L2-CL code signal to minimize mean acquisition time (MAT). The theoretical performance analysis and numerous Monte Carlo simulations show the significant advantage of the proposed TSCLA technique over conventional techniques introduced in the literature.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.294.2-294.2
• /
• 2016

Graphene, a sigle atomic layered structure of graphite, has drawn many scientific interests for attractive future electronics and optoelectronics beyond silicon-based technology because of its robust physical, optical, and electrical properties. But high metal-graphene contact resistance prevents the successful integration of high speed graphene devices and circuits, although pristine graphene is known to have a novel carrier transport property. Meanwhile, in the recently reported metal-graphene contact studies, there are many attempts to reduce the metal-graphene contact resistance, such as doping and one-dimensional edge contact. However, there is a lack of quantitative analysis of the edge contact scheme through variously designed patterns with different metal contact. We first investigate the effets of edge contact (metal-graphene interface) on the contact resistance in terms of edge pattern design through patterning (photolithography + plasma etching) and electral measurements. Where the contact resistance is determined using the transfer length method (TLM). Finally, we research the role of metal-kind (Palladium, Copper, and Tianium) on the contact resistance through the edge-contacted devices, eventually minimizing contact resistance down to approximately $23{\Omega}{\cdot}{\mu}m$ at room temperature (approximately $19{\Omega}{\cdot}{\mu}m$ at 100 K).

• Smart Structures and Systems
• /
• v.20 no.4
• /
• pp.441-450
• /
• 2017

The objective of this work is to present a conceptual design and the modelling of a distributed sensor system based on fiber optic devices (Fiber Bragg Grating, FBG), aimed at measuring span-wise and chord-wise variations of an adaptive (morphing) trailing edge. The network is made of two different integrated solutions for revealing deformations of the reference morphing structure. Strains are confined to typical values along the span (length) but they are expected to overcome standard ranges along the chord (width), up to almost 10%. In this case, suitable architectures may introduce proper modulations to keep the measured deformation low while preserving the information content. In the current paper, the designed monitoring system combines the use of a span-wise fiber reinforced patch with a chord-wise sliding beam. The two elements make up a closed grid, allowing the reconstruction of the complete deformed shape under the acceptable assumption that the transformation refers to regular geometry variations. Herein, the design logic and some integration issues are reported. Preliminary experimental test results are finally presented.

• Journal of Korean Society of Transportation
• /
• v.14 no.1
• /
• pp.51-67
• /
• 1996

The optimal path-finding problem becomes complicated when multiple variables are simultaneously considered such as physical route length, degree of congestion, traffic capacity of intersections, number of intersections and lanes, and existence of free ways. Therefore, many researchers in various fields (management science, computer science, applied mathematics, production planning, satellite launching) attempted to solve the problem by ignoring many variables for problem simplification, by developing intelligent algorithms, or by developing high-speed hardware. In this research, an integration of expert system technique and case-based reasoning in high level with a conventional algorithms in lower level was attempted to develop an optimal path-finding system. Early application of experienced driver's knowledge and case data accumulated in case base drastically reduces number of possible combinations of optimal paths by generating promising alternatives and by eliminating non-profitable alternatives. Then, employment of a conventional optimization algorithm provides faster search mechanisms than other methods such as bidirectional algorithm and $A^*$ algorithm. The conclusion obtained from repeated laboratory experiments with real traffic data in Seoul metropolitan area shows that the integrated approach to finding optimal paths with consideration of various real world constraints provides reasonable solution in a faster way than others.