• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제32회 KOSCO SYMPOSIUM 논문집
• /
• pp.205-212
• /
• 2006

Three-dimensional numerical study was carried out for the investigation of the detonation wave structures propagating in tubes. Fluid dynamics equations and conservation equation of reaction progress variable were analyzed by a MUSCL-type TVD scheme and four stage Runge-Kutta time integration. Chemical reaction was modeled by using a simplified one-step irreversible kinetics model. The variable gas properties between unburned and burned states were considered by using variable specific heat ratio formulation. The unsteady computational results in three-dimension show the detailed mechanisms of rectangular and diagonal mode of detonation wave instabilities resulting same cell length but different cell width in smoked-foil record. The results for the small reaction constant shows the spinning mode of three-dimensional detonation wave dynamics, which was rarely observed in the previous numerical simulation of the detonation waves.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.591-592
• /
• 2006

We studied about the manufacture of the drain-source contacts for OTFTs(organic thin-film transistors) by using screen printing method. The conductive fillers used Ag and carbon black. The conductive contacts with $100{\mu}m$ of channel length were screen printed on a silicon dioxide gate dielectric layer and, the pentacene semiconductor was deposited via vacuum deposition. As a result of studying various conductive pastes, we could obtain the OTFTs which exhibited field-effect behavior over arrange of drain-source and gate voltages, similar to devices employing deposited Au contacts. By using screen-printing with conductive paste, the contacts are processed at low temperature, thereby facilitating their integration with heat sensitive substrates.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.432-438
• /
• 1994

This paper describes the measuring method of vibration mode shapes by the Electronic Shearography. Shearographic interferometer has many merits in practical use, that is low sensitive to the environmental noisy, liw limit of the coherent-length and simple optical configuration etc.. In this study, we developed Michelson-type shearing interferometer provided with a phase stepping mirror and with a bias modulation mirror to quantify the vibration gradient fields. As a results of application to a simple cantilever plate vibration amplitude fields were obtained by the proper integration technique, and their exprimental results were in good agreement with those of the ESPI experiment.

• 한국농공학회지
• /
• 제28권1호
• /
• pp.68-74
• /
• 1986

The governing differential equations and the boundary conditions for the free vibra- tion of the unsymmetric parabolic arch with fixed ends are derived on the basis of the equilibrium equations and the D'Alembert principle. The effect of the rotary inertia as well as the extensional and the flexural deformations is considered in the governing differential equations. A trial eigenvalue method is used for determining the natural frequencies. The Ru- uge-Kutta method is used in this method to perform the integration of the differential equations. The detailed studies are made of the lowest three vibration frequencies for the par- abolic chord length equal to 10m. The effect of the rotary inertia is analyzed and it's numerical data are presented in table. And as the numerical results the frequency versus the rise of arch and the radius of gyration are presented in figures.

• 한국농림기상학회지
• /
• 제6권2호
• /
• pp.94-106
• /
• 2004

Determining those gaps in agricultural and other information to improve agrometeorological analyses for agriculture is a large task. The effective integration of appropriate data systems, including remote sensing systems, with agricultural systems modelling capability is described as a worthy outcome in this endeavour. Data issues, including those associated with data length, quality, maintenance, and archiving remain serious issues to be addressed. The role of remote sensing and geographic information systems in agrometeorology is important and is explored here. The value of simulation models to provide the synthesis for future agrometeorological requirements is further elucidated.

• Smart Structures and Systems
• /
• 제1권3호
• /
• pp.309-324
• /
• 2005

This paper presents an efficient and accurate coupled beam model for piezoelectric bimorphs based on improved first-order shear deformation theory (FSDT). The model combines the equivalent single layer approach for the mechanical displacements and a layerwise modeling for the electric potential. General electric field function is proposed to reasonably approximate the through-the-thickness distribution of the applied and induced electric potentials. Layerwise defined shear correction factor (k) accounting for nonlinear shear strain distribution is introduced into both the shear stress resultant and the electric displacement integration. Analytical solutions for free vibrations and forced response under electromechanical loads are obtained for the simply supported piezoelectric bimorphs with series or parallel arrangement, and the numerical results for various length-to-thickness ratios are compared with the exact two-dimensional piezoelasticity solution. Excellent predictions with low error estimates of local and global responses as well as the modal frequencies are observed.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2011년도 춘계학술대회
• /
• pp.329-330
• /
• 2011

This paper concerns to the acquisition of Global Positioning System L1 C/A coded signals. It specifically addresses the issues of acquiring very low power signals which are attenuated due to special circumstances such as indoor environment or forest canopy etc. The proposed post-processing algorithm applies modified signal folding coherent integration scheme on weak signal record. It dynamically compensates the doppler effect on the length of C/A code before integrating the signal power. Experimental results show effectiveness of the algorithm on weak GPS signals recorded in a real environment.

• 한국해양공학회지
• /
• 제20권3호
• /
• pp.24-36
• /
• 2006

This paper investigates wave loads of ships that suffer sinkage due to flood in a compartment caused by damage on the side of the hull. By analyzing ships with various sizesof damage opening, the influence of opening size on ship response is investigated. The motion of the damaged ship is analyzed by using the boundary element method, based on three-dimensional potential theory, considering hydrodynamic pressure in the flooded compartments. The shear forces, bending moments and torsional moments are calculated by the direct integration of the three dimensional hydrodynamic pressure on the outer and inner hulls. A RORO passenger ship with length of 174.8 m is considered in the numerical example, and results for wave loads are discussed.

• Structural Engineering and Mechanics
• /
• 제34권1호
• /
• pp.85-95
• /
• 2010

In this paper, numerical solution of the singular integral equation for the multiple curved branch-cracks is investigated. If some quadrature rule is used, one difficult point in the problem is to balance the number of unknowns and equations in the solution. This difficult point was overcome by taking the following steps: (a) to place a point dislocation at the intersecting point of branches, (b) to use the curve length method to covert the integral on the curve to an integral on the real axis, (c) to use the semi-open quadrature rule in the integration. After taking these steps, the number of the unknowns is equal to the number of the resulting algebraic equations. This is a particular advantage of the suggested method. In addition, accurate results for the stress intensity factors (SIFs) at crack tips have been found in a numerical example. Finally, several numerical examples are given to illustrate the efficiency of the method presented.

• 성인간호학회지
• /
• 제22권6호
• /
• pp.653-662
• /
• 2010

Purpose: This study was to identify the health status and reported resilience according to acculturation type among Chinese students in Korea. Methods: The subjects were 386 Chinese students studying in three universities in Chungnam province. The data were collected by standardized questionnaires and SPSS/WIN 15.0 program was used to analyze the data with descriptive statistics, Chi-square, t-test, and ANOVA. Results: Subjects reported the following Acculturation type: integration (26.7%), assimilation (28.5%), separation (32.4%), and marginalization (12.4%). The reported resilience was significantly different according to economic status. The health status was significantly different according to religion and economic status. Acculturation type was significantly different according to age, educational level, length of stay, type of residency and economic status working style. The health status and resilience were significantly different according to acculturation type. Conclusion: The findings suggest that integration of acculturation type is most useful to health status and resilience among Chinese students in Korea. Future studies need to examine acculturation type as coping strategy for foreign students' adaptation.