• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2004년도 추계학술발표논문집(상)
• /
• pp.303-306
• /
• 2004

프로세스 관리는 제품품질에 대한 요구가 높아져가는 상황에서 개발 완료 후 발생할 수 있는 결함을 사전에 식별 및 해결해줄 수 있다. 이러한 프로세스 관리 활동은 측정 활동을 통해 현재의 프로세스 품질과 향후 프로세스 개선에 관한 정보를 효과적으로 얻을 수 있다. 측정활동의 효율성을 높이기 위해서는 측정 활동에서 얻어진 측정 데이터와 그 외 관련 데이터들을 측정 저장소(Measurement Repository)에서 저장하고 관리해야 한다. SEI(Software Engineering Institute)에서 개발한 프로세스 개선 모델인 CMMI(Capability Maturity Model Integration)에서는 조직 성숙도 레벨 2에서는 프로젝트 차원의 측정 저장소를 다루고 있으며, 조직 성숙도 레벨 3 에서는 조직 차원의 측정 저장소 확립을 하나의 Specific Practice 로 설정하고 있다. 조직 차원의 측정 저장소는 각 프로젝트의 측정 데이터를 통합하여 관리하기 때문에 조직 전체에 일관되고 예측 가능한 측정활동을 지원한다. 그러나 CMMI 에서는 조직차원의 측정 저장소를 구현하기 위한 상세하고 체계적인 절차와 방법을 언급하고 있지 않아 조직에서는 실제 구현에 어려움을 겪고 있다. 이에 본 연구에서는 CMMI를 기반으로 PSM(Practical Software Measurement), ISO15939(소프트웨어 측정 프로세스 표준)등의 자료를 참조하여 조직에서 측정 저장소를 효과적으로 구현할 수 있도록 지원하는 절차와 방안을 연구하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2633-2635
• /
• 2003

In this study, we propose a fuzzy polynomial neural networks (FPNN) and a genetically optimized fuzzy polynomial neural networks(GoFPNN) for identification of non-linear system. GoFPNN architecture is designed by a FPNN based on fuzzy set and its structure and parameters are optimized by genetic algorithms. A fuzzy neural networks(FNN) based on fuzzy set divide into two structures that is simplified inference structure and linear inference structure. The proposed FPNN is resulted from integration and extension of simplified and linear inference structure of FNN. The consequence structure of the FPNN consist of polynomials represented by networks using connection weights for rules. The networks comprehend simplified(Type 0), linear (Type 1), and quadratic(Type 3) inferences. The proposed FPNN can select polynomial type of consequence part for each rule. Therefore, proposed scheme can offer flexible structure design capability for a system characteristics. Moreover, GAs is applied to networks structure and parameters tuning of proposed FPNN, and its efficient application method is discussed, these subjects are result in GoFPNN that is optimal FPNN. To evaluate proposed model performance, a numerical experiment is carried out.

• 센서학회지
• /
• 제18권5호
• /
• pp.337-342
• /
• 2009

This paper describes a robust mobile u-healthcare system with multiple physiological signs measurement capability in real time with integration of WSN(wireless sensor network) technology and CDMA(code division multiple access) network. A cellular phone receives health data in WSN and performs local physiological signs analysis at a phone processor, and then transmits abnormal data to server for further detail or precise health signal evaluation by a medical doctor over a CDMA network. Physiological signs of the patients are continuously monitored, processed and analyzed locally at cellular phone process to produce useful medical information for diagnosis and tracking purposes. By local simple analysis in cellular phone processor we can save the data transmission cost in CDMA network. By using the developed integrate ubiquitous healthcare service architecture, patients can realize self-health checking so that the prevention actions can be taken earlier. Appropriate self-monitoring and self-management can cure disease and relieve pain especially for patients who suffer from chronic diseases that need long term observation.

• 한국군사과학기술학회지
• /
• 제19권1호
• /
• pp.16-25
• /
• 2016

In this paper, we suggest a quantitative management scheme to accomplish effective weapon systems test and evaluation service(T&E). The Capability Maturity Model Integration(CMMI) process model has been introduced and applied for that purpose by the 8th directorate, Agency for Defense Development(ADD). Although a CMMI process model was developed focusing on the software development, systematic approaching scheme in the CMMI process model can be utilized for the quantitative management implementation of a weapon systems T&E service. To manage a T&E service quantitatively, at first, organizational performance objectives and sub processes are established, and then each performance indicators and performance base lines are followed.

• 항공우주기술
• /
• 제7권1호
• /
• pp.151-160
• /
• 2008

본 논문에서는 발사체에 적용하는 전기-유압식 추력벡터제어 구동장치시스템의 합성공진 현상에 대한 해석 연구결과를 기술한다. 합성공진 현상은 위치서보 구동장치시스템을 유연한 발사체 기체구조체 지지부에 장착하였을 때 발생한다. 이는 관성부하를 갖는 전기-유압식 위치서보 시스템의 유압공진 현상과 유연한 기체구조체 지지부의 구조공진 현상의 합성에 의하여 발생한다. 합성공진 현상은 발사체 제어시스템에 의하여 되먹임 및 증폭되어 안정성을 악화시킬 수 있다. 이와 같은 현상을 정확하게 예측 및 분석할 수 있는 비선형 모델을 개발하였으며 이에 기반을 둔 합성공진 억제 특성이 우수한 동적 압력 되먹임(dynamic pressure feedback) 제어기법을 개발하였다.

• 한국항해항만학회지
• /
• 제43권5호
• /
• pp.328-334
• /
• 2019

Underwater architecture in providing a comfortable living space underwater is mandated to survive prevailing environmental loads, especially hydrostatic ambient water pressure exerted on the structure of individual habitat hulls at depth and hydrodynamic fluctuation of external forces that perturb the postural equilibrium and mooring stability of the underwater housing system, for which the design including the hull shape and mooring system constraint the responses. In this study, the postural stability of a proposed underwater floating housing system with three vertically connected ellipsoidal-shape habitat hulls of different sizes are theorized and calculated for hydrostatic stability, using MATLAB in the volumetric integration of a hull and the weight of operational loads under assumed scenarios. The assumptions made in the numerical method to estimate the stability of the habitat system include the fixed weight of the hulls, and their adjustable loads within operational limits for the set meteorological oceanic conditions. The purpose of this study was to numerically manipulate a) The buoyancy and b) The adjusted center of mass of the system within the range of designed external and internal load changes, by which the effective mooring system capability and postural equilibrium requirements were argued with the quantitative analysis.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.2021-2034
• /
• 2008

This paper shows the result of study on the process improvement/innovation based on CMMI(Capability Maturity Model Integration) for Development V1.2 staged representation in the view of engineering area of software, hardware and system. This paper intend to help rolling stock industry to define & innovate process and finally obtain certificate for achievement of CMMI V1.2 from SEI authorized SCAMPI Lead Appraiser through the introduction experienced by Hyundai Rotem Company(car-builder and supplier of electronic & electrical equipment) such as why CMMI-based process definition & improvement are planned and how each processes of CMMI V1.2 Level 3 have been implementing and how obtaining the certificate of CMMI Maturity Level 3 of CMMI for Development V1.2 staged representation etc. This paper shows the introduction to CMMI V1.2 model, process improvement methodology and CMMI appraisal on the basis of Standard $CMMI^{SM}$ Appraisal Method for Process Improvement($SCAMPI^{SM}$), V1.2. And, this paper shows about what kinds of activities/practices of 18 processes(CMMI Maturity Level 3) is essentially implemented to satisfy their's specific goal and general geal through Hyundai Rotem Company's experiences. This paper shows the advantage and problem by adopting CMMI V1.2 model. Especially, it present the corrective/preventive actions against the identified problem in order to improve processes.

• 한국컴퓨터정보학회논문지
• /
• 제24권6호
• /
• pp.99-107
• /
• 2019

With the development of various types of military Unmanned Aircraft(UA)s, the need for interworking and integration between different platforms gradually increased. In order to ensure interoperability at each military UA System(UAS) level, North Atlantic Treaty Organization(NATO) has established STANAG-4586 "Standard Interfaces of Unmanned Aircraft(UA) Control Systems(UCS) for NATO UA Interoperability-Interface Control Document". This paper looks at the basic design structure of STANAG-4586 and the changes on Edition 4 to enhance joint operational capability through reflecting and updating the interoperability design of the military UAS. In particular, we analyze the enhanced Datalink Transition/Handover Procedure and Autonomous functions, one of the biggest features added to the edition. Through this, we propose a modification of UA data link exclusive control using UA Bypass structure, which was impossible in the one-to-one communication structure between existing UA and Core UCS(CUCS). We also suggest ways to improve UA operational reliability by applying Autonomous Functions that directly decides how to deal with emergency situations, rather than by a remote operator over CUCS.

• Journal of Korean Neurosurgical Society
• /
• 제64권4호
• /
• pp.495-504
• /
• 2021

Three-dimensional printing (3DP) applications possess substantial versatility within surgical applications, such as complex reconstructive surgeries and for the use of surgical resection guides. The capability of constructing an implant from a series of radiographic images to provide personalized anatomical fit is what makes 3D printed implants most appealing to surgeons. Our objective is to describe the process of integration of 3DP implants into the operating room for spinal surgery, summarize the outcomes of using 3DP implants in spinal surgery, and discuss the limitations and safety concerns during pre-operative consideration. 3DP allows for customized, light weight, and geometrically complex functional implants in spinal surgery in cases of decompression, tumor, and fusion. However, there are limitations such as the cost of the technology which is prohibitive to many hospitals. The novelty of this approach implies that the quantity of longitudinal studies is limited and our understanding of how the human body responds long term to these implants is still unclear. Although it has given surgeons the ability to improve outcomes, surgical strategies, and patient recovery, there is a need for prospective studies to follow the safety and efficacy of the usage of 3D printed implants in spine surgery.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2013년도 추계학술발표대회
• /
• pp.933-935
• /
• 2013

국내 시스템 구축(System Integration) 및 유지보수(System Maintenance) 사업은 긴 사업 기간과 함께 하나의 사업을 다양한 업체와 함께 협력하여 개발을 하며 운영되고 있다. 이 중 대형 IT서비스업체는 컨설팅 및 제안을 통해 고객의 업무와 요구사항을 파악하며, 프로젝트를 이끌기 위해 방법론을 적용하여 사업 체계 관리 및 운영을 주로 담당한다. 그런데 이와 같은 관리 위주의 사업을 진행함으로써 임직원들의 개발 역량 부족 문제가 발견되고, 이것은 시스템에 대한 이해도 부족으로 다양한 업체와 협력하는데 있어 커뮤니케이션 문제로 직결되어 시스템의 품질 및 결함에 영향을 주기 때문에 이에 대한 대책 및 예방활동이 필요하다. 또한, 작은 국내 시장에서는 이미 경쟁이 심화 되어 포화 되었으며, 대부분의 IT서비스기업은 SI사업에서 솔루션사업으로 변모하기 위해 노력 중이고 국내 시장에서 해외 시장으로 눈을 돌리고 있으므로 직원들에 대한 기술 역량이 시급한 실정이다. 이와 같은 상황에 기업은 준비가 미흡할 뿐만 아니라 해당 활동을 수행하기 위한 필요한 지식 및 방법을 익히는데 어려움이 있는 상황이다. 본 논문에서는 이러한 상황을 극복하기 위해 대형 IT서비스업체에서 진행된 개발역량강화 학습조직 적용 사례에 대해 소개를 하고, 이에 대한 효과 검증을 해보고자 한다.