• Journal of electromagnetic engineering and science
• /
• 제13권4호
• /
• pp.233-239
• /
• 2013

This paper proposes an accurate approach for predicting transferred power from a noise source to integrated circuits based on the characteristics of the power transfer network. A power delivery trace on a package and a printed circuit board are designed to transmit power from an external source to integrated circuits. The power is demonstrated between an injection terminal on the edge of the printed circuit board and integrated circuits, and the power transfer function of the power distribution network is derived. A two-tier calibration is applied to the test, and scattering parameters of the network are measured for the calculation of the power transfer function. After testing to obtain the indispensable parameters, the real received and tolerable power of the integrated circuits can be easily achieved. Our proposed estimation method is an enhancement of the existing the International Electrotechnical Commission standard for precise prediction of the electromagnetic immunity of integrated circuits.

• 융합보안논문지
• /
• 제24권2호
• /
• pp.175-180
• /
• 2024

미래전의 양상은 첨단과학기술의 발전에 따라 다양한 유·무인 전투체계들이 전투를 수행하는 것으로 변화하고 있다. 미래의 무기체계들은 대량의 정보를 생성하고 송·수신하게 되며, 이에 따라 현재의 전술정보통신체계는 미래의 기반 통신체계로 운용하기에 제한된다. 또한 군단급 이상의 대규모 제대의 정보유통량을 분석하기 위해서는 전장에서 발생할 수 있는 다양한 상황들을 고려하여야 한다. 이에 본 논문에서는 Army TIGER 군단의 정보유통량을 분석하기 위해 지상망 단독 운용, 통합망 운용, 부하 분산, 장애 극복 시나리오 등 네 가지 시나리오를 기반으로 한 M&S 결과를 분석한다. 또한 지상·공중·우주망이 통합된 다계층 통합 전술통신망의 운용을 통해 네트워크의 신뢰성과 안정성을 향상할 수 있음을 제시한다.

• 한국수자원학회논문집
• /
• 제36권1호
• /
• pp.105-115
• /
• 2003

본 연구에서는 상수관망의 신뢰도해석을 위해 수리적 신뢰도와 기계적 신뢰도를 통합적으로 해석할 수 있는 통합신뢰도 해석모형을 개발하였다. 수리적 신뢰도는 불화실성을 가진 변수들에 대하여 적절한 변동계수를 가진 확률 분포형을 적용시켜 임의변수로 고려하였고 기계적 신뢰도는 관망의 각 구성물에 대해 순차적 고장을 발생시켜 각 고장에 대한 영항을 해석하여 신뢰도를 산정하였다. 덕 연구모형을 실제관망에 대한 적용결과 본 모형은 실제관망에 대한 불확실한 요소를 고려한 신뢰도를 잘 모의하고 있었다. 앞으로 신뢰성있는 상수관망 설계 및 기존 관망의 신뢰도 판정에 본 모형이 적용된다면 기계적 및 수리적으로 객관성이 있는 신뢰도를 가진 상수관망의 건설 및 유지관리가 될 수 있다고 판단된다.

• 한국전자파학회논문지
• /
• 제21권2호
• /
• pp.110-120
• /
• 2010

본 논문에서는 대 면적 기판 집적 도파관 전력 분배 네트워크(Substrate Integrated Waveguide Power Distribution Network: SIW PDN)의 출력 단자 간 위상차를 제거하기 위해 유전체 나사를 적용한 가변 기판 집적 도파관(SIW: Substrate Integrated Waveguide)을 제안한다. 본 제안 구조는 가변 기판 집적 도파관에 비 도금된 비아 홀에 부분적으로 유전체 나사를 삽입하여 S-parameter의 크기에 거의 영향을 주지 않고 위상 천이를 이룬다. 이로써, 유전체 나사가 삽입되지 않은 가변 기판 집적 도파관이 적용된 대 면적 SIW PDN($370\;mm{\times}195\;mm$)의 측정된 ${\pm}33.9^{\circ}$의 위상 차이가 본 제안 구조를 통하여 ${\pm}4.65^{\circ}$까지 크게 감소되었다. 본 논문에서 제안된 유전체 나사를 이용한 가변 SIW는 향후 초경량, 고성능 기판 집적 위상 배열 시스템 및 대 면적 SIW 회로 응용에 중요한 역할을 할 것으로 기대된다.

• 한국산학기술학회논문지
• /
• 제8권5호
• /
• pp.1034-1041
• /
• 2007

본 논문은 저압 감시 기능을 포함하는 개선된 배전자동화시스템 개발에 관한 연구 결과를 소개한 것으로서 연구배경, 시스템 구성, 설계, 시제품 제작, 시험 및 실계통 시범운영 등 전반적인 사항을 설명한다. 개발 시스템은 배전현장에서 별도로 수행 중인 변압기 부하감시, 전압감시 및 정전감시 및 품질감시 업무를 배전자동화시스템에 통합하여 운영함으로써 보다 경제적이고 효율적인 배전망의 운영을 위하여 개발되었다. 시스템 통합을 위한 통신망은 간선망과 지선망을 갖도록 계층적으로 구성하고, 변압기 부하 측의 저압 감시를 위한 단말장치를 새로 개발하였다. 또한, 기존 배전자동화시스템에 저압 감시 기능을 추가하기 위하여 주장치 소프트웨어를 개선하였다. 개발 시스템은 실계통 시범운영을 통하여 설계 및 성능이 검증되었다.

• 산업공학
• /
• 제12권2호
• /
• pp.222-236
• /
• 1999

This paper presents a design and implementation of an intelligent-integrated production-logistics systems. The situation considered here is that there are multiple manufacturing plants and multiple distribution centers. Effective distribution resource and production planning are required to reduce inventory cost and to avoid inventory shortage. We propose an intelligent forecasting scheme of each distribution centers, adaptive inventory replenishment planning, distribution resource planning, and integrated production planning system. In forecasting a huge number of on-line model identification is performed using neural network approximation capability. An efficient adaptive replenishment planning and distribution resource planning are also presented in connection with forecasting scheme. An appropriate production is also requested based on production lead-time and the results of distribution planning. Experimental simulations are presented to verify the proposed approach using real data.

• 전기학회논문지
• /
• 제58권8호
• /
• pp.1463-1471
• /
• 2009

In this paper, a new algorithm of Integrated Volt/Var Control (IVVC) is proposed using Volt/Var control for the Distribution Automation System (DAS) based on the modeling of the distributed load and the distributed current. In the proposed, the load flow based on the modeling of the distributed load and the distributed current are estimated from constants of four terminals using the measurement of the current and power factor from a Feeder Remote Terminal Unit (FRTU). For Integrated Volt/Var Control (IVVC), the gradient method is applied to find optimal solution for tap and capacity control of OLTC (On-Load Tap Changers), SVR (Step Voltage Regulator), and SC (Shunt Condenser). What is more Volt/Var control method is proposed using moving the tie switch as well as IVVC algorithm using power utility control. In the case studies, the estimation and simulation network have been testified in Matlab Simulink.

• Journal of Communications and Networks
• /
• 제14권5호
• /
• pp.554-565
• /
• 2012

In this paper, we study a cross-layer and end-to-end optimization problem for the integrated wireless and wireline network that consists of one wireline core network and multiple wireless access networks. We consider joint end-to-end flow control/distribution at the transport and network layers and opportunistic scheduling at the data link and physical layers. We formulate a single stochastic optimization problem and solve it by using a dual approach and a stochastic sub-gradient algorithm. The developed algorithm can be implemented in a distributed way, vertically among communication layers and horizontally among all entities in the network, clearly showing what should be done at each layer and each entity and what parameters should be exchanged between layers and between entities. Numerical results show that our cross-layer and end-to-end optimization approach provides more efficient resource allocation than the conventional layered and separated optimization approach.

• 대한안전경영과학회지
• /
• 제22권4호
• /
• pp.65-74
• /
• 2020

Many of companies have made significant improvements for globalization and competitive business environment The supply chain management has received many attentions in the area of that business environment. The purpose of this study is to generate realistic production and distribution planning in the supply chain network. The planning model determines the best schedule using operation sequences and routing to deliver. To solve the problem a hybrid approach involving a genetic algorithm (GA) and computer simulation is proposed. This proposed approach is for: (1) selecting the best machine for each operation, (2) deciding the sequence of operation to product and route to deliver, and (3) minimizing the completion time for each order. This study developed mathematical model for production, distribution, production-distribution and proposed GA-Simulation solution procedure. The results of computational experiments for a simple example of the supply chain network are given and discussed to validate the proposed approach. It has been shown that the hybrid approach is powerful for complex production and distribution planning in the manufacturing supply chain network. The proposed approach can be used to generate realistic production and distribution planning considering stochastic natures in the actual supply chain and support decision making for companies.

• KEPCO Journal on Electric Power and Energy
• /
• 제7권1호
• /
• pp.93-99
• /
• 2021

The government has proposed a mission to enhance intelligent power networks, decrease coal-fired generation, expand distributed energy resources, and promote energy prosumer into the distribution network in Korea. Installation cost of facility expansion to guaranteed interconnection with small distributed energy resources increases dramatically on KEPCO's distribution sector. And it is hard to withdraw in time. In addition, there are explicit research is required to meet the reliability on grid corresponding to the increase of distributed power. Infrastructure support for accommodating energy prosumer is also needed. Therefore, KEPCO is pushing transition to DSO by expanding distribution management scope and changing its roles. In addition, KEPCO is proactively preparing for integrated operation between distribution network and existing distributed power which is accommodated passively. KEPCO is also trying to accept multiple network users, e.g. building platforms, to manage a data and promote new markets. In the long term, transition to DSO will achieve saving investment costs for accommodating distributed sources and maintaining stable electrical quality. And it will be possible to create new business model using the platform to secure revenue.