• 전기학회논문지
• /
• 제60권9호
• /
• pp.1668-1673
• /
• 2011

Recent power industries are to be progressed as moving into horizontal markets and expanding of competitive systems through promoting SmartGrid. In these environments, the information on power consumers leads to establish a part of power markets through active and real-time participations instead of participating it as a passive manner presented by a vertical integration. Also, such information should be established as a way that effectively reflects changes and market behaviors occurred in power market participants. Therefore, in this study, a method that develops consumer information models, performs integrated managements, implements registration and distribution, and forms integrated management centers is presented to commonly use the consumer information according to the change in the environment of power industries.

• 대한안전경영과학회지
• /
• 제9권5호
• /
• pp.43-48
• /
• 2007

This paper is to present linkage parameter to integrate statistical models and physical models for accelerated life test. Statistical models represent the relationship of probability distribution and life. Physical models show the relationship of life and stress. Moreover, this study proposes the four steps for construction of integrated models for accelerated life test using linkage parameter. Finally, this paper develops new integrated models such as extreme value distribution-general Eyring, linearly increasing failure rate function-general Eyring, etc., and estimates various reliability measures.

• 전기학회논문지
• /
• 제58권8호
• /
• pp.1463-1471
• /
• 2009

In this paper, a new algorithm of Integrated Volt/Var Control (IVVC) is proposed using Volt/Var control for the Distribution Automation System (DAS) based on the modeling of the distributed load and the distributed current. In the proposed, the load flow based on the modeling of the distributed load and the distributed current are estimated from constants of four terminals using the measurement of the current and power factor from a Feeder Remote Terminal Unit (FRTU). For Integrated Volt/Var Control (IVVC), the gradient method is applied to find optimal solution for tap and capacity control of OLTC (On-Load Tap Changers), SVR (Step Voltage Regulator), and SC (Shunt Condenser). What is more Volt/Var control method is proposed using moving the tie switch as well as IVVC algorithm using power utility control. In the case studies, the estimation and simulation network have been testified in Matlab Simulink.

• 한국항행학회논문지
• /
• 제28권2호
• /
• pp.210-215
• /
• 2024

선박의 자동화 수준이 높아지고 자율운항선박의 개발에 따라 선박의 IPMS (integrated platform management system)는 다양한 운영체제로 통제되는 개별 장비들을 통합하고 다량의 데이터를 실시간으로 처리해야 한다. 이러한 상황에서 데이터 처리를 위해 DDS (data distribution service) 미들웨어 기반 선박 IPMS 시뮬레이터를 개발하고 성능을 평가하였다. 이종 운영체제로 동작하고 있는 신호입출력장치와 IPMS 서버에서 초당 1,000개의 토픽을 비동기로 발간하고 구독한 시뮬레이션을 수행하였으며, 초기 4초 동안 일부 토픽의 누락을 제외하고는 오류 없이 데이터를 수신하였다. 개발된 시뮬레이터는 실제 선박에서 DDS를 이용하여 다른 제어체계를 통합할 수 있음을 보여준다.

• Journal of electromagnetic engineering and science
• /
• 제13권4호
• /
• pp.233-239
• /
• 2013

This paper proposes an accurate approach for predicting transferred power from a noise source to integrated circuits based on the characteristics of the power transfer network. A power delivery trace on a package and a printed circuit board are designed to transmit power from an external source to integrated circuits. The power is demonstrated between an injection terminal on the edge of the printed circuit board and integrated circuits, and the power transfer function of the power distribution network is derived. A two-tier calibration is applied to the test, and scattering parameters of the network are measured for the calculation of the power transfer function. After testing to obtain the indispensable parameters, the real received and tolerable power of the integrated circuits can be easily achieved. Our proposed estimation method is an enhancement of the existing the International Electrotechnical Commission standard for precise prediction of the electromagnetic immunity of integrated circuits.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권6호
• /
• pp.692-698
• /
• 1999

This paper analyzes the effect of DGS(Dispersed Generation System) on the voltage regulation of the traditional distribution system of which the voltage is controlled by the bank LDC(Line Drop Compensator). Through the simulation results for 22.9kV class distribution system with DGSs, some general relationships among the operating power factor and introduction limit of DGS, and the sending-end reference voltage determined by internal setting coefficients of the LDC are derived. Those relationships are that the introduction limit of DGS increases as the power factor of DGS goes from lagging to leading and also as the allowance of the sending-end reference voltage increases. From the relationships, a operation method of the power distribution system integrated with DGSs is proposed from the view point of the operating power factor of DGS and new voltage regulation method.

• 산업경영시스템학회지
• /
• 제21권48호
• /
• pp.37-52
• /
• 1998

In many distribution systems important cost reductions and/or service improvements may be achieved by adopting an efficient inventory policy and proper selection of facilities. These efficiency improvements and service enhancements clearly require an integrated approach towards various logistical planning functions. The areas of inventory control and transportation planning need to be closely coordinated. The purpose of this paper is to construct an integrated model that can minimize the total cost of the transportation and inventory systems between multiple origin and destination points, where in origin point i has the supply of commodities and in destination point j requires the commodities. In this case, demands of the destination points are assumed random variables which have a known probability distribution. Using the lot-size reorder-point policy and the safety stock level that minimize total cost we find optimal distribution centers which transport the commodities to the destination points and suggest an optimal inventory policy to the selected distribution center. We also show if a demand greater than one unit will occur at a particular time, we describe the approximate optional replenishment policy from computational results of this lot-size reorder-point policy. This model is formulated as a 0-1 nonlinear integer programming problem. To solve the problem, this paper proposes heuristic computational procedures and a computer program with UNIX C language. In the usefulness review, we show the meaning and validity of the proposed model and exhibit the results of a comparison between our approach and the traditional approach, respectively.

• 전력전자학회논문지
• /
• 제22권4호
• /
• pp.353-359
• /
• 2017

To take advantage of electric propulsion, several large vessel kinds, namely, cruise vessels, icebreakers, drill ships, and warships, have been generally designed with Integrated Power System (IPS). Although most of these vessels have adopted AC distribution IPS, DC distribution IPS ships have recently emerged as a new promising technology thanks to the availability of the products related to the DC distribution system, in which the system's major advantages over AC distribution are reduced weight and fuel consumption. This paper presents the comparison results of a 10-t class fishing boat for the AC distribution and DC distribution cases. By replacing AC distribution system with DC distribution, 31-41% reduction in the weight of the electrical equipment weight and 20-25% reduction in the fuel consumption are expected.

• ETRI Journal
• /
• 제33권5호
• /
• pp.814-817
• /
• 2011

In this letter, the distributions of direct current (DC) coefficients for P-frames in H.264/AVC are analyzed, and the distortion model of the Gaussian source under the quantization of the dead-zone plus-uniform threshold quantization with uniform reconstruction quantizer is derived. Experimental results show that the DC coefficients of P-frames are best approximated by the Laplacian distribution and the Gaussian distribution at small quantization step sizes and at large quantization step sizes, respectively.

• 산업공학
• /
• 제24권1호
• /
• pp.24-39
• /
• 2011

In this paper, we study the methodology for the measurement and integration of market risk and credit risk using Copula. We apply the methodology of Rosenberg, and Schuermann(2006) to the assets of pension system. Firstly we estimate dynamics of risk factors and their effects on investment returns, then use the estimated result to simulate future movement of risk factors and distribution of investment returns. Finally we measure integrated risk using integrated return distribution by Copula and simulated future investment return distributions. We found the integrated risk changing with the correlation of risks and investment weights of risks and confirmed the diversification effect of risks. This result is consistent when we use normal Copula and normal marginals, t-Copula and t(3) marginals, and normal Copula and non-parametric marginals. And in the case of non-parametric maginals, larger integrated risk is calculated. It means that use of non-parametric marginals is more conservative.